Depolymerization of poly(2,6-dimethyl-1,4-phenylene oxide) under oxidative conditions

Depolymerization of an engineering plastic, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), was accomplished by using 2,6-dimethylphenol (DMP) under oxidative conditions. The addition of an excess amount of DMP to a solution of PPO in the presence of a CuCl/pyridine catalyst yielded oligomeric products. When PPO (M(n)=1.0x10(4), M(w)/M(n)=1.2) was allowed to react with a sufficient amount of DMP, the molecular weight of the product decreased to M(n)=4.9x10(2) (M(w)/M(n)=1.5). By a prolonged reaction with the oxidant, the oligomeric product was repolymerized to produce PPO essentially identical to the starting material, making the oligomer useful as a reusable resource. During the depolymerization reaction, an intermediate phenoxyl radical was observed by ESR spectroscopy. Kinetic analysis showed that the rate of the oxidation of PPO was about 10 times higher than that of DMP. These results show that a monomeric phenoxyl radical attacks the polymeric phenoxyl to induce the redistribution via a quinone ketal intermediate, leading to the substantial decrease in the molecular weight of PPO, which is much faster than the chain growth.     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Copper-Mediated Conversion of Complex Ethers to Esters: Enabling Biopolymer Depolymerisation under Mild Conditions

Selective processing of the β-O-4 unit in lignin is essential for the efficient depolymerisation of this biopolymer and therefore its successful integration into a biorefinery set-up. An approach is described in which this unit is modified to incorporate a carboxylic ester with the goal of enabling the use of mild depolymerisation conditions. Inspired by preliminary results using a Cu/TEMPO/O₂ system, a protocol was developed that gave the desired β-O-4-containing ester in high yield using certain dimeric model compounds. The optimised reaction conditions were then applied to an oligomeric lignin model system. Extensive 2D NMR analysis demonstrated that analogous chemistry could be achieved with the oligomeric substrate. Mild depolymerisation of the ester-containing oligomer delivered the expected aryl acid monomer.     

Zinc‐Catalyzed Depolymerization of End‐of‐Life Polysiloxanes

Polymers occupy an important role in our current society. Besides their great success, an issue is the accumulation of huge amounts of end‐of‐life polymers. Currently, the waste management is based primarily on landfills, thermal recycling, and downcycling. Notably, only a small portion of end‐of‐life materials is recycled by depolymerization, which refers to the creation of synthetic precursors that can be polymerized to new polymers to close the cycle. Widely used polymers in modern times are silicones (polysiloxanes), the intrinsic properties of which make their depolymerization demanding; only a few high‐temperature or less environmentally friendly processes have been reported. In this regard, we have established an efficient low‐temperature protocol for the depolymerization of silicones with benzoyl fluoride in the presence of cheap zinc salts as precatalysts to yield defined products. Notably, the products can be useful synthetic precursors for the preparation of new polymers, so that an overall recycling process is feasible.     

Catalytic Ethanolysis of Kraft Lignin into High‐Value Small‐Molecular Chemicals over a Nanostructured α‐Molybdenum Carbide Catalyst

We report the complete ethanolysis of Kraft lignin over an α‐MoC_1?x/AC catalyst in pure ethanol at 280 °C to give high‐value chemicals of low molecular weight with a maximum overall yield of the 25 most abundant liquid products (LP25) of 1.64 g per gram of lignin. The LP25 products consisted of C₆–C₁₀ esters, alcohols, arenes, phenols, and benzyl alcohols with an overall heating value of 36.5 MJ kg^?1. C₆ alcohols and C₈ esters predominated and accounted for 82 wt % of the LP25 products. No oligomers or char were formed in the process. With our catalyst, ethanol is the only effective solvent for the reaction. Supercritical ethanol on its own degrades Kraft lignin into a mixture of small molecules and molecular fragments of intermediate size with molecular weights in the range 700–1400, differing in steps of 58 units, which is the weight of the branched‐chain linkage C₃H₆O in lignin. Hydrogen was found to have a negative effect on the formation of the low‐molecular‐weight products.     

农作物秸秆解聚研究

农作物秸秆是重要的生物质资源。本文从我国建立资源节约和环境友好社会目标的角度,论述了农作物秸秆高效利用的重要性和研究农作物秸秆解聚对开发农作物秸秆高效利用的新工艺的重要意义。介绍了农作物秸秆解聚的典型工艺及解聚产物组成分析和利用研究的进展,预测了农作物秸秆解聚研究的发展方向。     

Radioprotectors from pyrodextrins

Cornstarch heated in the range of 230–280°C depolymerized into pyrodextrins characterized by two-component EPR signals of relatively stable free radicals. These thermally generated radicals could serve as efficient scavengers for free radicals generated from pyrodextrins with the 200 Gy dose of γ-radiation. The most efficient traps/scavengers were produced from cornstarch at 250–280°C. IR data indicated incorporation of the OH groups to the pyrodextrins. These groups most probably originated from the OH· radicals formed by the radiolysis of water. EPR spectra provided evidence for trapping free radicals generated by γ-irradiation and for their subsequent annihilation on contact with pyrodextrins. Water affected radical processes occurring in pyrodextrins caused by γ-irradiation.     

Organocatalytic depolymerization of poly(ethylene terephthalate)

We describe the organocatalytic depolymerization of poly(ethylene terephthalate) (PET), using a commercially available guanidine catalyst, 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD). Postconsumer PET beverage bottles were used and processed with 1.0 mol % (0.7 wt %) of TBD and excess amount of ethylene glycol (EG) at 190 °C for 3.5 hours under atmospheric pressure to give bis(2‐hydroxyethyl) terephthalate (BHET) in 78% isolated yield. The catalyst efficiency was comparable to other metal acetate/alkoxide catalysts that are commonly used for depolymerization of PET. The BHET content in the glycolysis product was subject to the reagent loading. This catalyst influenced the rate of the depolymerization as well as the effective process temperature. We also demonstrated the recycling of the catalyst and the excess EG for more than 5 cycles. Computational and experimental studies showed that both TBD and EG activate PET through hydrogen bond formation/activation to facilitate this reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generator side‐chains: Effect of spacer‐chain length

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generators in the side‐chain was investigated. Irradiation with UV light generated base on the side‐chains and induced depolymerization based on proton abstraction on the main‐chain. The effect of the length of the spacer chain, which connects the photobase‐generating moiety to the polymer main chain on the photoinduced depolymerization, also was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3873–3880     

Laccases ofRigidoporus lignosus andPhellinus noxius

A laccase that has been isolated previously (1) from the Basidiomycete,Rigidoporus lignosus, a white rot fungus of rubber tree, was used in the present study. When a thioglycolic lignin (TGL) was incubated in the presence of this enzyme, pronounced changes in the UV spectrum and size distribution of the substrate were observed. Sephadex gel filtration indicated that two types of reactions occurred: (1) A degradation of the polymer, as evidenced by the production of low-molecular-weight material; and (2) a condensation of some of the TGL molecules, as revealed by an increase in the fractions of higher molecular weight.