基于深度学习的中医古文献临床经验抽取

中医古文献蕴藏着丰富的临床经验，是古代中医在行医过程中对临床诊疗的经验性总结，体现了中医学形成和发展的理论框架和思想基础.然而这些宝贵的临床经验不仅量大，而且分散在不同的文献中，使得中医从业者手工很难快速全面地获取它们，文献检索工具也只能提供文档级别的信息筛选，无法为这种细粒度的信息获取提供支持.此外，古汉语相对于现代汉语的不同特点也限制了主流文本分析工具的使用效果.为此本文提出面向临床经验获取的中医古文献信息抽取任务，用于识别古文献中描述临床经验的文本片段，手工标注了样本数据用于这种抽取模型的训练和测试，并设计了基于深度学习的序列标注器用于完成该任务.考虑到标注数据量小可能带来的过度拟合问题，本文引入对抗训练和虚拟对抗训练来增强模型的泛化能力.一系列充分的实验验证了模型的有效性，表明利用信息抽取技术从古文献获取中医临床经验具有可行性，为这一新的信息抽取任务提供了有希望的研究基线和可复用的标注数据集.     

螺栓连接大变形梁非线性振动特性的实验研究

柔性机械臂、大型可展开天线等机械结构的动作精度受运动过程中大变形几何非线性和连接处接触非线性的影响十分显著。以含螺栓连接结构的大变形梁作为研究对象，针对动力学建模和振动特性开展了实验研究，通过数值计算验证了实验发现的非线性振动特性。搭建了含螺栓连接柔性大变形梁的实验台架，开展了敲击和正弦激振的实验测试。实验结果表明，螺栓连接的柔性梁较连续梁的（无螺栓连接）模态频率降低，阻尼增加，反映出随着激励能量增大，模态频率降低的非线性模态特征。改变螺栓连接位置会显著影响结构的模态频率，其变化规律可由求解线性矩阵特征值定性反映。     

轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

非同分布φ混合序列加权和的强极限收敛性

利用φ混合序列矩不等式和截尾的处理方法,研究非同分布φ混合序列加权和强极限收敛性质的问题,得到了若干新结果,推广并改进了独立同分布情形下的相应结果.     

Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

ZnO nanowire lines and bundles: Template-deformation-guided alignment for patterned field-electron emitters

One-dimensional ZnO materials have been promising for field-emission (FE) application, but how to facially control the alignment of ZnO emitters is still a great challenge especially for patterned display application. Here, we report the fabrication of novel ZnO nanowire (NW) line and bundle arrays for patterned field-electron emitters. The effects of PS template size and heating time on the resulted ZnO nanoarrays were systematically studied. The deformation degree of PS templates was controlled and hence utilized to adjust the alignment of electrochemically deposited ZnO arrays. It was found that the length of NW lines and the density of NW bundles can effectively tuned by the PS template heating time. The optimal FE performance with turn-on electric field as low as of 4.4 V μm⁻¹ and the field-enhancement factor as high as of 1450 were achieved through decreasing the screening effect among the patterned field-electron emitters.     

具有sn-网的空间

证明了具有σ—点有限sn—网及σ—局部可数sn—网的空间可刻划为度量空间在某些确定映射下的象.     

一种特殊递推关系序列的判断及求解

对于特征多项式为C(x) =(x- 1) r的特殊递推序列an,给出了它的通解求法以及判定它的充要条件 :存在整数r≥ 1,对任意的n≥ 0 ,Δran =0成立。其中Δran 为递推序列 {an}的r阶差分。     

蕴含W5可图序列的最小度和

Gould,Jacobson和Lehel考虑了下述经典Tur偄n型极值问题的变形:对于给定的图H,确定最小的正偶数σ(H,n),使得对于每一个n项可图序列π=(d1,d2,…,dn),当σ(π)=d1+d2+…+dn≥σ(H,n)时,π有一个实现G包含H作为可图的.本文确定了当n≥11时,σ(W5,n)之值,其中Wr是r个顶点的轮图.