基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

食用蓝藻螺旋藻和葛仙米中金属元素的分析

采用硝酸和高氯酸(4∶1)混合酸消化2种可食用蓝藻螺旋藻和葛仙米,原子吸收光谱法检测螺旋藻和葛仙米中的K、Na、Mg、Ca、Zn、Fe、Cu、Mn、Cr、Pb和Cd共11种金属元素含量。结果表明,2种蓝藻中矿质元素含量均较高,特别是Ca含量高达61 905.132mg·kg~(-1);而有害重金属Cr,Po和Cd含量均远低于国家规定标准,表明这2种食用蓝藻均无重金属富集或污染。本结果显示,螺旋藻和葛仙米是极好的天然富钙营养食品,可作为人体矿质元素和微量元素缺乏症的补给品.     

医药洁净室的计算流体动力学模拟及实测对比

采用计算流体动力学(CFD)模拟,研究3个医药洁净室的气流流型及颗粒物浓度.采用标准k-ε双方程模型,通过模拟颗粒物在洁净室的分布,分析合理的污染物散发位置及散发比例.对比参考发尘量下的结果与实测数据的差异,根据实测数据确定污染散发量,通过试验不同的单位容积发尘量,计算对应的洁净度,得到与实测数据吻合最好的单位容积发尘量.在单位容积发尘量为1 000pc·(m3·min)-1计算条件下,各房间的模拟结果与实测数据数值比较吻合,且经CFD预测的3个房间的洁净度变化趋势与实测一致.     

Antioxidant activities and bioactive compounds of five Jalopeno peppers (Capsicum annuum) cultivars

The present study was designed to evaluate the contents of different antioxidants compounds and their antioxidant activities in Jalopeno peppers (Capsicum annuum) cultivars (El Dorido, Grande, Tula, Sayula and El Rey) extracts. Free radical scavenging activity of Grande was recorded as high as 87% followed by El Dorido (83%). Results of reducing power (Fe³⁺ to Fe²⁺) showed that Grande (0.85%) and El Dorido (0.81%) fruit extract absorbance value were close to synthetic antioxidant BHT (0. 97%) obtained at100 μg/mL. The results showed that total phenolic content of El Dorido and Grande were significantly higher compared to other Jalapeno pepper. Results indicated strong and positive correlation between antioxidant activity and carotenoids content (r = 0.75), vitamin C (r = 0.78) and total capsaicinoids (r = 0.84), respectively. The results of the antioxidant activity assays showed that the El Dorido and Grande had strongest antioxidant activity compared to other peppers cultivars in this study.     

Simple, expedient methods for the determination of water and electrolyte contents of cellulose solvent systems

The concentrations of water, W, and electrolytes present in solutions of LiCl in N,N-dimethylacetamide, LiCl/DMAc, and of tetrabutylammonium fluoride. x-hydrate in DMSO, TBAF.xW/DMSO can be accurately and expediently determined by three independent methods, UV–vis, FTIR and EMF measurement. The first relies on the use of solvatochromic probes whose spectra are sensitive to solution composition. It is applicable to W/LiCl/DMAc solutions but not to TBAF.xW/DMSO, because the charge-transfer complex bands of the probes are suppressed by strong interactions with the latter electrolyte. Integration of ν_OH band of water may be employed in order to determine [W], hence [electrolyte] by weight difference. EMF measurement uses ion-selective electrodes in order to determine [electrolyte], hence [W] by weight difference. Results of the latter method were in excellent agreement with those of FTIR. The reason for the failure of Karl Fischer titration is addressed, and the relevance of the results obtained to functionalization of cellulose under homogenous solution conditions is briefly commented on.     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

利用光反射精确测量亚共析碳钢的含碳量

本文从光学角度出发提出了一种经济实用、精度高的测量亚共析碳钢中碳的含量的新方法。阐述了该方法的测量原理，即以金相试样表面对光的反射程度来判定其含碳量，并给出了有关经验公式及数据处理方法。     

空调冷凝器、蒸发器残留水分量检测系统

本文介绍了空调冷凝器、蒸发器残留水分量检测系统的组成和工作原理、技术指标、系统的工艺过程，最后说明了系统的考核和应用情况。     

云南臭参的研究现状和开发构想

介绍了有关臭参挥发性臭味的化学成分 ,臭参的化学成分、药效学和急性毒性动物实验、临床实验、营养成分测定、药理学研究等研究现状 .提出了科研及产品开发构想 .