Developing Flexible Quinacridone-Derivatives-Based Photothermal Evaporaters for Solar Steam and Thermoelectric Power Generation

Solar-driven interfacial vaporization by localizing solar-thermal energy conversion to the air−water interface has attracted tremendous attention. In the process of converting solar energy into heat energy, photothermal materials play an essential role. Herein, a flexible solar-thermal material di-cyan substituted 5,12-dibutylquinacridone (DCN−4CQA)@Paper was developed by coating photothermal quinacridone derivatives on the cellulose paper. The DCN−4CQA@Paper combines desired chemical and physical properties, broadband light-absorbing, and shape-conforming abilities that render efficient photothermic vaporization. Notably, synergetic coupling of solar-steam and solar-electricity technologies by integrating DCN−4CQA@Paper and the thermoelectric devices is realized without trade-offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low-grade heat-to-electricity generation functions can provide potential opportunities for fresh water and electricity supply in off-grid or remote areas.     

Precise Synthesis and Thin Film Self-Assembly of PLLA-b-PS Bottlebrush Block Copolymers

The ability of bottlebrush block copolymers (BBCPs) to self-assemble into ordered large periodic structures could greatly expand the scope of photonic and membrane technologies. In this paper, we describe a two-step synthesis of poly(l-lactide)-b-polystyrene (PLLA-b-PS) BBCPs and their rapid thin-film self-assembly. PLLA chains were grown from exo-5-norbornene-2-methanol via ring-opening polymerization (ROP) of l-lactide to produce norbornene-terminated PLLA. Norbonene-terminated PS was prepared using anionic polymerization followed by a termination reaction with exo-5-norbornene-2-carbonyl chloride. PLLA-b-PS BBCPs were prepared from these two norbornenyl macromonomers by a one-pot sequential ring opening metathesis polymerization (ROMP). PLLA-b-PS BBCPs thin-films exhibited cylindrical and lamellar morphologies depending on the relative block volume fractions, with domain sizes of 46–58 nm and periodicities of 70–102 nm. Additionally, nanoporous templates were produced by the selective etching of PLLA blocks from ordered structures. The findings described in this work provide further insight into the controlled synthesis of BBCPs leading to various possible morphologies for applications requiring large periodicities. Moreover, the rapid thin film patterning strategy demonstrated (>5 min) highlights the advantages of using PLLA-b-PS BBCP materials beyond their linear BCP analogues in terms of both dimensions achievable and reduced processing time.     

多纤芯弹性光网络中虚拟网络映射模型及算法

为解决多纤芯弹性光网络虚拟化中的虚拟结点映射、链路映射和频谱分配问题,首先建立了一个以最小化占用的频谱数及最小化最大占用频隙号为目标的全局约束优化模型.其次,设计了具有高效的交叉、变异及不可行解可行化算子的全局优化遗传算法,以有效求解该模型得到最优的虚拟节点、链路映射方案.最后,为验证算法的有效性进行了不同的仿真实验.结果表明,所设计的算法能够有效地减小网络中占用的频谱数和最大占用频隙号.     

从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

解决一类优化问题的变分迭代法

考虑利用变分迭代方法求解最优化问题,分别给出了求解一般的有约束和无约束最优化问题的基本步骤,并通过实例说明了所给方法的有效性.     

血清miRNA提取方法的优化

利用正交试验法优化血清miRNA的提取方法,为进一步研究血清miRNA作为生物标记物提供方法学基础.本文以hsa-miRNA-223-3p,hsa-miRNA-483-5p和hsa-miRNA-16为检测目标,通过比较Trizol法和Trizol+酚/氯仿法的miRNA提取效率和qPCR检测结果,应用正交试验选择出最优实验方案.结果表明血清miRNA的最优提取方法为:血清用DEPC水4倍稀释,离心条件为4℃,12 000r·min-1,离心时间为10min,Trizol法提取.     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

桅杆结构数据采集软件

文章介绍了桅杆结构数据采集软件的编制 ,并基于HY -8021多功能数据采集板与光电位置传感器的特性 ,使得该软件可满足以低频振动为主的建筑工程结构数据采集的要求。     

尾水管水力振动的监测与故障判断

从模型及真机试验结果出发，叙述混流式水轮机一般的水力故障形式，研究了尾水管的水力振动特点及振动随运行工况而变化的情况，介绍了以压力脉动频率及幅值作为特征参量对尾水管进行振动监测及故障判断的方法。     

汽车修竣后的检验

长期以来，如何对修竣后的汽车进行系统性的检验，如何了解汽车的技术性能是否得到完全恢复，这些问题一直困扰着广大汽车维修和检测人员。主要对修竣后的汽车，如何进行路试前、路试中及路试后检验进行了详细的探讨。