A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

含气率对PTS时压力容器内流动与传热的影响

本文对反应堆压力容器紧急安注时的流动与传热特性在1/10的模型上进行了流动可视化、局部传热系数以及混合函数的试验研究。针对三个热冲击敏感区域的部分测点,比较了环腔流速为0.5m/s、安注流速为1～30 m/s时不同含气率对下降环腔内流动与传热特性的影响,得出并分析了不同测点传热系数、混合函数的变化规律。研究结果表明:随着含气率增大,安注流体与环腔流体的混合增强;下降环腔内的含气率对小安注流速时的流动与传热影响显著,而对大安注流速时影响较小。     

燃料添加剂对柴油机烟粒燃烧的影响

考察了燃料添加剂对降低柴油机烟粒燃点温度的效应。含金属添加剂的柴油机烟粒被收集在金属纤维过滤器上,把原状烟粒样品移入实验室反应器,用模拟柴油机排气进行燃烧试验。实验结果表明,当烟粒中含有Pd或Cu时,烟粒的燃点温度可降至430℃左右(普通柴油机烟粒的燃点温度约600℃);Pd的添加还可大大降低烟粒一次燃烧产物中CO的分率。文中还对金属(催化剂)/烟粒接触程度和添加剂溶液中可燃性部分对烟粒燃烧的影响作了讨论。     

Microwave promoted energy-efficient N-formylation with aqueous formic acid

Microwave-induced organic reaction enhancement (‘MORE’) chemistry technique (open vessel; controlled microwave energy to stay below the boiling point of the reaction mixture) was used for the N-formylation of aliphatic and aromatic amines and amino heterocycles with aq formic acid (80%) on a multiple gram scale in a few minutes.     

不同重力环境下辐射加热材料表面着火特性分析

研究外界辐射加热下，不同重力环境中热薄燃料的着火特性．探讨了重力、环境氧浓度、环境压力及外界辐射强度对着火的影响．结果表明，随着重力的变化，存在不同的着火机制．在微重力和在高的环境氧浓度中，材料的着火延迟时间变短．压力减小，着火延迟时间增大．随着辐射强度的增大，着火延迟时间变小．     

Equilibrium Shapes of Pressure Vessel Domes in Asymmetric Winding

Errors in the programs of winding pressure vessels can lead to an asymmetric reinforcement structure, which affects the equilibrium shape of their domes and the tension in the left and right families of filaments. In this paper, equations determining the equilibrium shape of the domes, the tension in filaments, and the shear stresses between layers are obtained. Examples with winding trajectories in the form of geodesics and constant-deviation lines are considered. It is found that, for pressure vessels, in the absence of external torque, the tension levels in filaments of the left and right families differ considerably. It is also revealed that, for actual friction coefficients in winding, the shear stresses taken up by the binder are insignificant. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 743–752, November–December, 2005.     

强化传热生物质燃料热风炉研究

研制出用于粮食及其它农副产品干燥的新型热风炉。此炉型采用生物质燃料洁净燃烧技术及高强化传热技术,具有低污染、高效率、长寿命等优点。     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

A time‐accurate pseudo‐compressibility approach based on an unstructured hybrid finite volume technique applied to unsteady turbulent premixed flame propagation

A preconditioning approach based on the artificial compressibility formulation is extended to solve the governing equations for unsteady turbulent reactive flows with heat release, at low Mach numbers, on an unstructured hybrid grid context. Premixed reactants are considered and a flamelet approach for combustion modelling is adopted using a continuous quenched mean reaction rate. An overlapped cell‐vertex finite volume method is adopted as a discretisation scheme. Artificial dissipation terms for hybrid grids are explicitly added to ensure a stable, discretised set of equations. A second‐order, explicit, hybrid Runge–Kutta scheme is applied for the time marching in pseudo‐time. A time derivative of the dependent variable is added to recover the time accuracy of the preconditioned set of equations. This derivative is discretised by an implicit, second‐order scheme. The resulting scheme is applied to the calculation of an infinite planar (one‐dimensional) turbulent premixed flame propagating freely in reactants whose turbulence is supposed to be frozen, homogeneous and isotropic. The accuracy of the results obtained with the proposed method proves to be excellent when compared to the data available in the literature. Copyright © 2004 John Wiley & Sons, Ltd.