Simple, expedient methods for the determination of water and electrolyte contents of cellulose solvent systems

The concentrations of water, W, and electrolytes present in solutions of LiCl in N,N-dimethylacetamide, LiCl/DMAc, and of tetrabutylammonium fluoride. x-hydrate in DMSO, TBAF.xW/DMSO can be accurately and expediently determined by three independent methods, UV–vis, FTIR and EMF measurement. The first relies on the use of solvatochromic probes whose spectra are sensitive to solution composition. It is applicable to W/LiCl/DMAc solutions but not to TBAF.xW/DMSO, because the charge-transfer complex bands of the probes are suppressed by strong interactions with the latter electrolyte. Integration of ν_OH band of water may be employed in order to determine [W], hence [electrolyte] by weight difference. EMF measurement uses ion-selective electrodes in order to determine [electrolyte], hence [W] by weight difference. Results of the latter method were in excellent agreement with those of FTIR. The reason for the failure of Karl Fischer titration is addressed, and the relevance of the results obtained to functionalization of cellulose under homogenous solution conditions is briefly commented on.     

超声波作用下的制冷剂水合物结晶过程研究

首先分析了超声波对制冷剂水合物成核生长的影响机理,然后进行了实验研究。结果表明,超声波对水合物的结晶生长有明显的影响,阶梯形的超声探头作用下的成核引导时间比指数形锥体引导时间长,促进水合物生长的超声波功率P范闱是58W相似文献   

Molecular dynamics study on the structure I helium hydrate

A 368- water molecule structure I gas hydrate, encased by the number of helium (He) molecules ranging from two to twenty-two, are calculated by molecular dynamical simulations. The potential TIP4P (transferable intermolecular potentical with four sites) is used for water interactions and Lennard-Jones for He-He and He-water interactions. He molecules do not affect the water lattice and can stabilize the hydrate when their concentration is small. A trough signature of He encased is found at 80～90 meV in the phonon density of states. He molecules prefer to be more off-center in 51262 cages. Heavier isotope He are energetically favorable to be filled in cages.     

Polyfluorinated hydrazones in organic synthesis

A preparative one-step method for the synthesis of 1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2,3-dione dihydrazone from perfluoro-4-methylpent-2-ene and hydrazine hydrate has been developed. Oxidation of this dihydrazone with bromine in water gives 3-diazo-1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2-one. The same product is obtained from 3-hydrazono-1,1,1,5,5,5-hexafluoro-4-trifluoromethylpentane-2-one under similar conditions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2039–2041, November, 1994.This work was supported by the Russian Foundation for Basic Research (the project code 94-03-08548).     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

叔醇脱水成烯反应的溶剂化能力与介电常数的关系

我们用Fe_2(SO_4)_3·xH_2O为催化剂,对2-甲基-2-已醇脱水生成烯烃反应的溶剂化能力及其动力学做了研究,测定了20种不同溶剂中的反应速率常数和以丙至辛6种直链醇为溶剂于不同温度下反应的速率常数,确定了溶剂化能力与溶剂介电常数之间的线性关系。这方面工作尚未见报道。     

On the pressure-induced phase transformation in the structure II clathrate hydrate of tetrahydrofuran

A high-pressure phase of the clathrate hydrate of tetrahydrofuran was prepared by freezing a liquid phase of overall composition THF · 7 H₂O under a pressure of 3.0 kbar, or by pressurizing the solid structure II THF hydrate of 255K to 3.4 kbar. Unfortunately, the products recovered at 77K were always mixed phase materials as shown by X-ray powder diffraction. A number of diffraction lines could be indexed in terms of the cubic structure I hydrate with a slightly expanded lattice parameter, 12.08 Å, giving some support to Dyadin's idea that the high pressure phase transition involves a conversion of Structure II to Structure I. Other phases observed in the recovered product include Ice IX and amorphous materials. The reversion of the high pressure sample to the structure II hydrate was followed by differential scanning calorimetry. At ambient pressure, the high pressure sample converts slowly back to Structure II hydrate event at 77K.NRCC No. 35786.     

Spectrothermal investigation of the decomposition course of lanthanum acetate hydrate

Thermogravimetry, differential thermal, X-ray diffraction and infrared spectroscopy analyses showed La(CH₃COO)₃·1.5H₂O to decompose completely at 700°C yielding La₂O₃. The results revealed that the compound dehydrates in two steps at 130 and 180°C, and recrystallizes at 210°C. Water thus produced hydrolyzes surface acetates (at 310°C), releasing acetic acid into the gas phase. At 334°C, the anhydrous acetate releases gas phase CH₃COCH₃ to give La₂(CO₃)₃ residue, which decomposes to La₂O₂(CO₃) via the intermediate La₂O(CO₃)₂. On further heating up to 700°C, La₂O₃ is formed. IR spectroscopy of the gaseous products indicated a chemical reactivity at gas/solid interfaces formed throughout the decomposition course. As a result, CH₃COCH₃ was involved in a surface-mediated, bimolecular reaction, releasing CH₄ and C₄H₈ (isobutene) into the gas phase. Non-isothermal kinetic parameters, the rate constantk, frequency factorA, and activation energy ΔE, were calculated on the basis of temperature shifts experienced in the thermal processes encountered, at various heating rates (2–20 deg·min^?1).     

水合醋酸铈直接热分解制备超细氧化铈及其抛光性能

Ultra fine ceria was prepared by calcining hydrate cerium acetate. The effects of pyrolysis temperature on the particle size, morphology, specific surface area and loose packing density of ceria were investigated, and the removal rate of optical glasses polishing by ceria was determined. The results show that with the increase of pyrolysis temperature, the loose deposit density and crystallinity increases and the specific surface area decreases, however, the particle size decreases firstly and then increases, the minimum medium particle size D₅₀ is 0.47 μm at pyrolysis temperature of 1 000 ℃. The SEM images of ceria prepared by the decomposition at 800 ℃ or at 1 100 ℃ show porous powders or quasi-sphere small particles with loosely agglomeration, respectively. It was found that the removal rate varied with pyrolysis temperature in preparation of ceria and the property of glass polished. The removal rate for three kinds of glasses was in the order of ZF7> F1> K9, and the maximum value appeared at around 1 000 ℃ for ZF7 and F1, and at around 1 100 ℃ for K9.