Two‐stage copolycondensation of preformed oligomers with bisphenols by tosyl chloride/dimethylformamide/pyridine from distributions of resulting oligomers determined by a combination of gel permeation chromatography and NMR

A two‐stage co‐oligomerization of the oligomers initially formed from an equimolar mixture of isophthalic acid (IPA) and terephthalic acid (TPA) and 2,2‐bis(4‐hydroxyphenyl)propane (BPA, 50 mol %) with bisphenols (BPs, 20 mol %) was carried out using a tosyl chloride/dimethylformamide/pyridine condensing agent. The distributions of the resulting oligomers (n_x‐mers), which were quenched with methanol, were determined by a combination of gel permeation chromatography (GPC) and NMR. These distributions (presented by molar percentage) were conveniently calculated with the equation n_x (mol %) = n_x (% mol by GPC) × n₀ (mol % by NMR)/n₀ (% mol by GPC), where n_x (% mol) = n_x (wt % by GPC)/its molecular weight. The results showed the distributions of the preformed IPA/TPA‐BPA oligomers to be in fairly good accord with those obtained directly from GPC and to be supported by the NMR results. The calculation was applied to the co‐oligomers prepared up to a reaction of 0.7, at which there was an increase in the number of higher oligomers indivisible by GPC and the distributions could no longer be determined by molar percentage. The calculated distributions are discussed in relation to the results of copolycondensation. The sequence distributions in the resulting co‐oligomers, which were also examined by NMR, are compared with those in the copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 44–51, 2004     

Polyesterification of aromatic dicarboxylic acids and bisphenols with tosyl chloride/dimethylformamide/pyridine promoted by the improvement of the difficult solubility of the activated diacids with lithium chloride

The solution polyesterification of dicarboxylic acids in pyridine, the activated intermediates of which were difficult to dissolve in tosyl chloride/dimethylformamide/pyridine, was investigated in the presence of lithium chloride. The solubility of the activated dicarboxylic acids was largely improved by the presence of the salt, and the polycondensation with bisphenols was greatly facilitated. The salt was more effectively added to a pyridine solution of dicarboxylic acids than to the activated dicarboxylic acids in pyridine. The favorable additive effect on the improved solubility was attributed to a lowered degree of association of the activated dicarboxylic acids, which led to distributions of the resulting oligomers from bisphenols at an earlier stage closer to the theoretical ones and yielded better polycondensation results. The reaction, which proceeded through favorable distributions of the co‐oligomers, produced copolymers of higher inherent viscosities and slightly block sequence distributions determined by NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2725–2733, 2004     

Cubane derivatives 1. Synthesis and molecular structures of the esters of 1,4-cubanedicarboxylic acid

An effective method of esterification of 1,4-cubanedicarboxylic acid with alkylsulfuric acids is proposed. The derivatives of alkanols with substantially different pK_a Valus are obtained in high yields. Molecular structures of the esters obtained are confirmed by various methods. The X-ray study showed a remarkable effect of the nature of an alkyl radical on the geometry of the cubane core.Translated fromIzyestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp.668–672, April, 1994.The authors thank Dr. G. V. Lagodzinskaya for analyzing the NMR spectra and for useful discussions.     

水合硫酸铁在丙烯酸酯化反应中的催化作用

研究了用水合硫酸铁替代硫酸作催化剂，催化丙烯酸与多种醇的酯化反应，发现其具有良好的催化活性．探讨了醇的结构对催化剂和酯化反应的影响，以及催化酯化反应的可能机理     

酯化交联聚乙烯醇膜用于渗透气化法分离EtoH／H2O的研究

合成了一系列磷酸和二元羧酸酯化交联改性的聚乙烯醇(PVA)膜,研究了它们用于水-乙醇混合液的渗透气化分离规律。磷酸改性的PVA膜具有较大的通量,当料液浓度为50%时,通量可达1200g/m~2·hr.,分离系数α_(H_2O/EtOH)=10。丙二酸改性PVA膜在料液浓度为50%时,通量可达800g/m~2·hr.,且α_(H_2O/EtOH)=18。并作了这两种膜的通量和分离系数随料液浓度的变化曲线。草酸交联的PVA膜具有较高的分离系数,但通量很小。求出了水、乙醇及总的表现渗透活化能。     

Enzymatic synthesis of neopentylpolyol esters in organic media

Utilization of lipases for synthesis of esters of hydrophilic polyols has been investigated. The choice of a suitable solvent is crucial in this type of reaction. An interesting case is fatty acid esters from neopentylpolyols, such as trimethylolpropane, which are of great interest as high temperature lubricants. Enzymatic synthesis of trimethylolpropane tricaprylate was studied as an alternative to chemical manufacturing. Triester production occurred only if the water produced by esterification was continuously removed from the medium. In these condition, kinetics of appearance and transformation of mono-, di- and triesters were determined in order to define optimal conditions.     

磁性固体超强酸SO42-/ZrO2-Al2O3-Fe3O4的制备与性能研究

利用化学共沉淀法将磁性基质与固体酸组装制备磁性纳米固体超强酸催化剂，利用XRD、Raman、TG-DSC、M?ssbauer、TEM、HRTEM等手段对样品性质进行表征。结果表明：磁性基质的引入赋予固体超强酸以超顺磁性；Fe₃O₄、Al₂O₃粒子弥散在ZrO₂基质中，烧结过程中阻碍了扩散传质的进行以及晶界移动，抑制了ZrO₂晶体生长，稳定了四方晶相(T-ZrO₂)；样品粒径分布集中，平均约为32 nm；HRTEM显示T-ZrO₂晶体生长取向于(101)方向，晶面间距d(101)=0.29 nm；Hammett指示剂法测得经600 ℃焙烧后产物的酸强度H_o＜-13.8，酸强度大于浓硫酸(H_o=-11.93)。以柠檬酸三丁酯的合成作为磁性固体超强酸SO₄^2-/ZrO₂-Al₂O₃-Fe₃O₄催化剂的探针反应，结果表明外磁场的引入提高了柠檬酸的转化率。     

负载稀土型酸活化膨润土的酯化催化活性

负载稀土型酸活化膨润土的酯化催化活性李永绣，冯天泽，胡平贵，何小彬，辜子英，廖荣辉（南昌大学化学系南昌３３００４７）关键词稀土，膨润土，催化酯化可用稀土、膨润土单独作酯化催化剂，但活性不高［１～３］。本文将稀土用离子交换的方法负载到酸活化膨润土中，寻...     

The 2-(diphenylphosphino) ethyl group (DPPE) as a new carboxyl-protecting group in peptide chemistry

The use of the 2-(diphenylphosphino)ethyl group for carboxyl-protection of amino acids or peptides is described. This group is easily introduced by esterification using 2-(diphenylphosphino) ethanol in the presence of dicyclohexylcarbodiimide and 4-(dimethylamino)pyridine. These Dppe esters are stable under the standard conditions for peptide synthesis. Deprotection is carried out under mild conditions by quaternisation using methyl iodide followed by a β-elimination induced by fluoride ion or potassium carbonate.     

糠酸一步催化法制备四氢糠酸甲酯

以糠酸、甲醇、氢气为原料,采用连续流动固定床微反应器,Pd-Ni/γ-Al2O3为催化剂,使糠酸一步加氢甲酯化生成α-四氢糠酸甲酯.研究了反应的温度,压力,气、液体流速,进料流量等因素对催化反应的影响.结果表明:在1.5MPa,250℃,氢气空速3300 h-1,液体空速3.0 h-1(氢油比为50)时,糠酸转化率为96.6%,四氢糠酸甲酯的选择性97.2.0%,产率94.0%.催化剂稳定性较好,连续运转280小时后未见活性下降.该反应体系活性高,选择性好,反应压力低,催化剂性能稳定,操作简单,产物易分离.