利用反预报方法从截面预言近滴线丰质子核的结合能

在Origin等数据处理软件中,当实验数据较少时,自由参数的不同初始化设置会导致较大的结果差异,这为物理结果的确定带来较大不确定性.通过最小二乘法分析了345MeV/u ~(78) Kr+~9Be反应中产生的丰质子同位素的截面和结合能,并得到线性回归方程.通过回归方程,利用结合能预报部分丰质子核素的截面,以及通过实验截面对近质子滴线核素的结合能进行反预报测量.这对于近质子滴线的丰质子核素实验测量具有较好的借鉴意义.     

The mechanism of ethylene polymerization by nickel salicylaldiminato catalysts - Agostic interactions and their kinetic isotope effects

The ethylene polymerization reaction of a neutral nickel catalyst was studied by DFT calculations at the Becke3LYP/6-31G(d) level of theory. As in related cases a β-agostic bond stabilizes the nickel alkyl ground states. Transition states for the insertion of the olefin show a distinct α-agostic interaction, which has not been observed for late metal polymerization catalysts before. An ethylene-alkyl complex was identified as the resting state of the reaction. The overall barrier height of the reaction amounts to 17.54 kcal/mol, which slightly increases to 17.60 kcal/mol for the polymerization of deuterated ethylene. Therefore, a small positive kinetic isotope effect (k_H/k_D = 1.09) can be calculated, which is caused by the α-agostic interaction in the transition state. A comparison to other late metal based polymerization systems reveals that the ethylene coordination step of highly active catalysts is significantly lower in energy compared to catalysts which are only moderately active.     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

14C-寡糖在西瓜幼苗植株体内吸收传导和分布

应用同位素示踪技术研究了14C-寡糖在西瓜幼苗植株体内的吸收、传导和分布行为.自显影结果显示,寡糖通过处理叶部或根部后能够被西瓜幼苗植株快速吸收,在叶片中的传导表现为从叶缘向叶片中心分布的趋势.将叶部处理8h和根部处理24h后,14C-寡糖即可以传导和分布到西瓜幼苗的整个植株体内,证明14C-寡糖在西瓜幼苗植株体内具有较强的扩散和向基或向顶传导特征.结果表明,处理叶部4～120h时,根系、茎与未被直接处理的叶片等其它部位的放射性比活度分别由0.18×105和23.08×105Bq/kg变化为0.32×105和3.02×105Bq/kg,总体上表现出向基传导和分布的态势.处理根部4～120h时,西瓜幼苗植株根系、茎部、子叶和真叶中放射性比活度分别由22.23×105,2.23×105,8.33×105和12.78×105Bq/kg变化为431.11×105,42.23×105,65.57×105和78.89×105Bq/kg,表现出14C-寡糖在西瓜幼苗植株体内向顶传导作用和在地上部的积累态势很强.     

Crystal Structure, Infrared Spectrum and Isotope Effect of Uranium-Crown Ether Complexes

According to the experiment results of X-ray diffraction and IR, the reduced partition function ratio (RPFR) and the contribution of various related vibration modes of uranium-crown ether complex (DCH18C6·H_3O)_2UO_2Cl_4 were theoreticallv calculated in detail. The equilibrium constant K_(eq) (that is, the single stage isotopic separation factor α) of exchange reaction for uranium isotopic chemical exchange system UO_2~(2+)(H_2O)_5—(DCH18C6.H_3O)_2UO_2Cl_4 is estimated to be 1.000746 at 12℃ and 1.000672 at 29℃, respectively, which are quite close to the experimental values 1.0010±0.0002 arid 1.0012±0.0004. Theoretical analysis shows that in the course of forming the complex of uranium with crown ether, the coordinated water of uranium is stripped, which performs a key action on the remarkable isotope effect for this system.     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。     

Compressibility and Volume Effects of Mixing of 1-Propanol with Heavy Water

Speed of sound and density of 1-propanol + heavy water were measured in the whole concentration range at temperatures from 293 to 313 K. Isentropic compressibility was calculated from the Laplace formula. The partial molar volume of 1-propanol reaches a minimum at the mole fraction of 1-propanol x ₁ 0.03. At the same concentration, the compressibility isotherms intersect one another. These features of the investigated system are similar to those of 1-propanol + H₂O, that points to essential similarity of the two mixtures. A clathrate-like structure was suggested to explain the experimental results for dilute solutions of the alcohol. Somewhat more pronounced hydrophobic hydration in D₂O than in H₂O is manifested by an effect similar to that resulting from the elongation of the alcohol molecule.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.