矿井索车的优化设计

对矿井索车优化设计中的几个关键性问题进行了探讨，包括驱动轮和尾轮的设计、钢丝绳直径的选择计算、托绳轮间距的确定、绳卡的设计、张紧力和张紧行程的确定、互锁问题的解决等。     

作业成本法数学模型的创新

随着企业产品价格竞争愈演愈烈，成本的合理分配、计算日显重要，但在间接费用的分摊上，传统成本会计对成本信息反映失真的局限性日益显露，会计理论界和实务界开始寻求一种新的准确的成本计算方法，作业成本法应运而生。本将由作业成本法基本原理推导出其数学模型，并将对其数学模型进一步改进，建立比较数学模型。使作业成本法向实际应用更进一步。     

A compact shock-assisted free-piston driver for impulse facilities

A free-piston driver that employs entropy-raising shock processes with diaphragm rupture has been constructed, which promises significant theoretical advantages over isentropic compression. Results from a range of conditions with helium and argon driver gases are reported. Significant performance gains were achieved in some test cases. Heat losses are shown to have a strong effect on driver processes. Measurements compare well with predictions from a quasi-one-dimensional numerical code. Received 7 September 1996 / Accepted 5 October 1996     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

浅议山西省农机事故的成因与对策

讨论了山西省农机事故的基本特征，分析了这些农机事故发生的主要原因，提出了预防和降低农机事故的主要措施。     

浅议矿井无轨胶轮车运输系统设计

论述了矿井无轨胶轮车运输系统在设计时应注意的7个问题。     

IPv4/IPv6翻译网关的研究

In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

出租车司机社会贡献评价方法研究

出租车司机的社会贡献对于促进城市经济发展和社会进步具有重要的作用,评价出租车司机的社会贡献是激励出租车司机多做社会贡献的重要手段。为了评价出租车司机的社会贡献,本文提出了一种基于实际出租车运营数据的评价方法。本文设计了运营特性、重点区域、恶劣天气、大事件四个体现司机社会贡献的指标,以此构建了出租车司机社会贡献评价指标体系,进而选用了主观赋权法G1法和客观赋权法拉开档次法相结合的赋权方式对指标赋权,并选择四种评价信息集结方法建立了出租车司机社会贡献评价模型。最后,通过实际的出租车运营数据验证了本方法的可行性。本文为评价出租车司机社会贡献提供了一种研究思路和方法,并对政府政策的制定和企业策略的实施具有一定的启示。     

Mach的面向对象的设备管理

目的为了设计和实现主式实时操作系统ＣＯＳＩＸ Ｖ２．０／ＲＴ平台,对Ｍａｃｈ３．０微内核的面向对象设备管理的源程序进行剖析。方法依据Ｍａｃｋ的Ｉ／Ｏ管理机制分析源程序,以并行接口为端口编写通讯驱动程序,并验证其正确性。结果 在分析的基础上,通过修改有关驱动程序的接口,实现了两台Ｍａｃｈ机或Ｍａｃｈ与基于ＤＯＳ机之间的通信。结论Ｍａｃｈ３．０采用端口和消息机制,Ｉ／Ｏ接口支持的设备驱动程序２独立于设