Azobenzene‐Functionalized Cage Silsesquioxanes as Inorganic–Organic Hybrid,Photoresponsive, Nanoscale,Building Blocks

Mono‐ and octa‐azobenzene‐functionalized cage silsesquioxanes were easily synthesized by the reaction of 4‐bromoazobenzene with monovinyl‐substituted octasilsesquioxane and cubic octavinylsilsesquioxane through the Heck coupling reaction. Excited‐state energies obtained from time‐dependent density functional theory (TDDFT) and the CAM‐B3LYP functional correlate very well with experimental trans–cis photoisomerization results from UV/Vis spectroscopy. These azobenzene‐functionalized cages exhibit good thermal stability and are fluorescent with maximum emission at approximately 400 nm, making them potential materials for blue‐light emission.     

建筑外环境的人性化设计

通过研究和分析人的行为模式与环境的互动关系,了解人们的行为倾向与需求,得出相关的环境设计准则供城市空间的创设者作参考,期望能为人们提供更多舒适自然、可亲可近的人性场所。     

Melting behaviors,crystallization kinetics,and spherulitic morphologies of poly(butylene succinate) and its copolyester modified with rosin maleopimaric acid anhydride

This article investigated the melting behaviors, crystallization kinetics, and spherulitic morphologies of poly(butylene succinate) (PBS) and its copolyester (PBSR) modified with rosin maleopimaric acid anhydride, using wide‐angle X‐ray diffraction, differential scanning calorimeter (DSC), and polarized optical microscope. Subsequent DSC scans of isothermally crystallized PBS and PBSR exhibited two melting endotherms, respectively, which was due to the melt‐recrystallization process occurring during the DSC scans. The equilibrium melting point of PBSR (125.9 °C) was lower than that of PBS (139 °C). The commonly used Avrami equation was used to describe the isothermal crystallization kinetics. For nonisothermal crystallization studies, the model combining Avrami equation and Ozawa equation was employed. The result showed a consistent trend in the crystallization process. The crystallization rate was decreased, the perfection of crystals was decreased, the recrystallization was reduced, and the spherulitic morphologies were changed when the huge hydrogenated phenanthrene ring was added into the chain of PBS. The activation energy (ΔE) for the isothermal crystallization process determined by Arrhenius method was 255.9 kJ/mol for PBS and 345.7 kJ/mol for PBSR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 900–913, 2006     

Synthesis and aggregation behavior of <Emphasis Type="Italic">N</Emphasis>-succinyl-o-carboxymethylchitosan in aqueous solutions

A simple and novel method was developed to successfully synthesize N-succinyl-O-carboxymethylchitosan (NSOCMCS) using N-acylation of chitosan with succinic anhydride. The NSOCMCS structure was characterized by Fourier transform infrared and ¹H nuclear magnetic resonance. The aggregation behaviors of NSOCMCS were studied using fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy techniques. The critical aggregation concentration of NSOCMCS in water was determined to be 0.2–0.3 mg/ml. The apparent hydrodynamic radium of an NSOCMCS aggregate was dependent on the concentration. The aggregates demonstrated a much swollen association conformation in aqueous solution. The possible aggregation mechanisms for the NSOCMCS in water are discussed. Moreover, a driving force to form an open aggregation morphology was revealed in this study. Aggregation behaviors are important physicochemical properties of NSOCMCS, which impact the potential application in the biomedical field.     

Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

Diglycidyl ether of 4,4′-dihydroxybiphenol (BPDGE) is a liquid crystalline epoxy. The biphenyl epoxy (diglycidyl ether of 3,3′,5,5′-tetramethyl-4,4′-biphenyl, TMBPDGE) has found great applications in plastic encapsulated semiconductor packaging. Phenol novolac (PN) was used as curing agent. The reaction kinetics of BPDGE/PN and TMBPDGE/PN systems in the presence of triphenylphosphine (TPP) were characterized by an isoconversional method under dynamic conditions using differential scanning calorimetry (DSC) measurements. The results showed that the curing of epoxy resins involves different reaction stages and the values of activation energy are dependent on the degree of conversion. The effects of curing temperature on their phase structure have been investigated with polarized optical microscopy and Wide-angle X-ray diffraction. With proper curing process, BPDGE showed a nematic phase when cured with PN.     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

Spectroscopic studies on 2,3,4,5-tetraphenylpyrylium salts with and without silver (I)-bridged structures

Two novel phenylated pyrylium compounds, silver (I)-bridged 2,3,4,5-tetraphenylpyrylium perchlorate (P1) and its silver (I)-free pyrylium ligand (P2) were prepared from 1,2,3,4-tetraphenylcyclopentadiene to examine their spectroscopic behaviors. The UV/vis absorption and fluorescent emission spectra of P1 and P2, measured in three solvents (acetonitrile, dichloromethane and toluene), reveal that the photophysical behaviors are closely related to silver (I) fragment, and strongly dependent on solvent polarity. In polar acetonitrile, P1 displays longer absorption wavelength and much lower fluorescent emission intensity than P2, although they exhibit much similarity in shape. In contrast, in nonpolar toluene, while P2 shows an apparent absorption band at 338 nm, P1 displays a tail-like line without absorption band observed. All the spectra obtained indicate a better coplanarity and a stronger intra-molecular charge transfer in P1 due to the effect of silver (I) fragment. Additionally, the 1H NMR spectra of P1 and P2, which were recorded under the same conditions, indicate that the silver (I) fragment reinforces pyrylium ring's capacity to localize the formal positive charge within the heterocyclic ring.     

Phenomenology of nonlocal cellular automata

Dynamical systems with nonlocal connections have potential applications to economic and biological systems. This paper studies the dynamics of nonlocal cellular automata. In particular, all two-state, three-input nonlocal cellular automata are classified according to the dynamical behavior starting from random initial configurations and random wirings, although it is observed that sometimes a rule can have different dynamical behaviors with different wirings. The nonlocal cellular automata rule space is studied using a mean-field parametrization which is ideal for the situation of random wiring. Nonlocal cellular automata can be considered as computers carrying out computation at the level of each component. Their computational abilities are studied from the point of view of whether they contain many basic logical gates. In particular, I ask the question of whether a three-input cellular automaton rule contains the three fundamental logical gates: two-input rules AND and OR, and one-input rule NOT. A particularly interesting edge-of-chaos nonlocal cellular automaton, the rule 184, is studied in detail. It is a system of coupled selectors or multiplexers. It is also part of the Fredkin's gate—a proposed fundamental gate for conservative computations. This rule exhibits irregular fluctuations of density, large coherent structures, and long transient times.     

Fe3O4水基磁流体的制备与研究

采用水热法制备了水基Fe3O4磁流体，利用X衍射仪和透射电镜对磁粒子的组成、结构及粒径进行了分析，利用古埃磁天平研究了磁流体的饱和磁化强度和超顺磁性，研究了反应时间、温度、表面活性剂等主要工艺参数对磁流体性能的影响。实验结果表明：采用水热法，Fe^2＋：Fe^3＋的比值为1．0，水热反应温度为160℃，反应时间为6h，采用油酸钠和十二烷基苯磺酸钠混合表面活性剂，在适宜的时间加入，配合机械搅拌和超声分散可以制备出性能较好的水基Fe3O4磁流体。     

型钢混凝土转换节点的抗剪性能

通过对连续型钢混凝土梁式转换层结构模型的两种加载方式进行拟静力试验,对比分析了型钢混凝土转换节点与柱不带轴压力型钢混凝土框架节点的抗震特性,得到了区别于普通框架节点的转换节点破坏机制、耗能能力、强度退化等.建立有限元模型,进一步对比分析,证明了转换节点在地震作用下的受力特性符合节点斜压杆机理,建立了型钢混凝土节点抗剪受力模型.