45钢固体粉末法稀土、硼、铬、铝共渗工艺研究

研究了RE_Mg合金对固体粉末法硼、铬、铝共渗层成分、组织和性能的影响 .发现随着RE_Mg合金加入量的增加 ,渗层中Al2 O3的量不断增多 ,当RE_Mg合金加入量为 5 %时 ,渗层中出现连续致密分布的Al2 O3黑区组织 ,对此进行了性能测试和机理探讨     

水轮机水力稳定性的分析

根据收集国内外水轮机水力稳定性资料 ,分析了引起水轮机水力不稳定性的因素 ,并结合实例分析可能引起的危害 ,最后提出了解决问题的方法和建议     

叶型优化在非定常流动条件下效果的数值分析

本文对叶型优化在非定常流动条件下的效果进行数值研究。叶型优化基于比较成熟的在定常流动条件下的反问题解法，非定常流动则考虑到动静叶栅之间的相互作用，非定常流动的求解在Ｎ－Ｓ方程的基础上采用分区计算的方法来完成。数值计算的结果表明，定常流动条件下优化得到的叶型在非定常流动条件下同样具有较好的气动性能。     

Generating Quadratic Pseudo-Anosov Homeomorphisms of Closed Surfaces

In this note, we show that given a closed, orientable genus-g surface S _g , any hyperbolic toral automorphism has a positive power which induces a quadratic, orientable pseudo-Anosov homeomorphism on S _g . To show this, we lift Anosov toral automorphisms through a ramified topological covering and present the lifted homeomorphism via a standard set of Lickorish twists. This construction provides a general method of producing pseudo-Anosov maps of closed surfaces with predetermined orientable foliations and quadratic dilatation. Since these lifted automorphisms have orientable foliations, this construction is a sort of converse to that of Franks and Rykken [Trans. Amer. Math. Soc. 1999], who established that one can associate to a quadratic pseudo-Anosov homeomorphism with oriented unstable foliation a hyperbolic toral automorphism.     

基于椭圆型方程的扭叶片造型方法的研究

本文以偏微分方程造型为基础,提出了一种基于椭圆型方程的扭叶片三维型面直接设计方法,详细推导了叶型曲面函数,给出了型面方程的求解及其前后缘修正。该方法具有设计叶型曲面自然光顺,设计参数少且各参数具有明显的几何意义,叶型曲面调整方便,利于采用非数值优化算法对其进行气动优化等优点。文中给出了设计实例,并通过数值实验分析了所设计叶片型面的流动特性。分析结果表明设计叶片具有良好的气动性能,同时也证明了本文提出的基于椭圆型方程的扭叶片三维型面设计方法的可靠性和实用性。     

INVESTIGATION ON OVERCOMING WEFT DETWISTING AIR-INSERTION OF AIR-JET LOOM

A special tip of vortex twisting nozzle is designed and fastened at the exit out of the drafted reed space or shed. Compressed air is supplied by the tube near the last subnozzle, weft yarn is retwisted and twistloss can be totally compensated with slight excess of 0.74%.     

Twist points of planar domains

We establish a potential theoretic approach to the study of twist points in the boundary of simply connected planar domains.

     

Insights on some chiral smectic phases

Combining layered positional order as smectic order and chirality can generate complex architectures since twist parallel to the layers is not allowed. This paper will review some new experimental results on different phases resulting from the competition between smectic positional order and twist orientational order. It concerns the TGB_A and the NL^*, that is the liquid line phase as well as the SmQ phase. Chiral effects in the isotropic phase will also be discussed.     

某轴流压气机叶尖间隙效应实验研究

本文对某低速轴流压气机叶尖间隙尺度对性能的影响进行了实验研究,并通过不同的机匣结构情况研究一种叶尖漏流不敏感机匣。实验表明,不同的间隙尺度对叶轮机总体性能存在十分明显的影响。对绝大部分运行状态,小间隙下的压升和效率均明显高于大间隙的情况。另外,所采用的毛刷式和篦齿式的机匣实验结果表明,不论毛刷式还是篦齿式机匣,在大流量负攻角情况下对性能的影响不大,但毛刷式机匣并不能达到提高失速裕度的目的,而篦齿式机匣在小流量情况下对压升有所提高,但对效率影响不大。     

麻花钻内锥面刃磨试验

阐述了内锥面法刃磨麻花钻的原理以及在工具磨床上进行磨削工艺试验的方法。通过试验刃磨出了合格的麻花钻,验证了内锥面法刃磨麻花钻理论,并对内锥面刃磨试验中存在的问题进行了分析讨论。