从形式语义学的角度看汉语时态算子对正极项的允准

极性敏感现象是语言的一种共性。本文通过对汉语中的时态副词的研究,证明了时态副词也是一种正极项,并验证了Ginnakidou所提出的真实性算子对极性敏感项的允准的假说同样适用于解释汉语中的正极项的分布。     

纳米科技的研究领域及前景展望

当物质小到纳米尺度时 ,就会出现新的现象 ,产生新的效应。纳米科技从三个方面进行研究 ,它的最终目的是以原子、分子为起点 ,制备具有特殊功能的产品 ,使这些产品的性能有明显的改善和提高。纳米科技的发展将引起一场几乎所有工业领域的革命。     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

单金纳米棒的光散射分析化学:径向比与分析灵敏度的关系

单纳米颗粒作为信号感应单元在化学与生物传感应用中已引起广泛关注.本文通过暗场显微成像(iDFM)研究了不同径向比金纳米棒的光散射性质.将iDFM与扫描电子显微镜(SEM)结合表征种子生长法制备的金纳米棒,结果发现,因局域表面等离子体共振而展示出的红色散射光随单个金纳米棒的径向比增大逐渐红移,且金纳米棒对其周围介质折光率(RI)变化的敏感程度随径向比增大而增大.这一结果对设计高灵敏的生物纳米传感器、提高分析检测的灵敏度具有很好的指导意义.     

取向比对椭球气溶胶粒子散射特性的影响

利用T矩阵和离散坐标法研究了取向比对椭球粒子散射特性的影响, 计算了小尺度范围内椭球粒子的散射特征参量, 包括消光效率因子、不对称因子、单次散射反照率、散射相矩阵及双向反射函数(BRDF). 结果表明, 椭球粒子的散射特性与取向比密切相关, 粒子取向比会影响散射参量的振荡频率和振幅, 与球形粒子散射参量的相对差异也呈周期振荡趋势. 研究还发现, 某些特殊粒子尺寸的散射参量与粒子取向比基本无关. 在多次散射条件下, 分析不同取向比粒子群的BRDF随反射角和光学厚度的变化特性. 结果显示: 不同取向比粒子群的BRDF随反射角的变化趋势基本一致, 球形粒子群比非球形粒子群的BRDF曲线波动振幅更大; 球形-非球形粒子的BRDF相对差异随光学厚度和取向比的增大而减小, 随入射角的增大而增大.     

Effect of aspect ratio of vertically aligned copper nanowires in the presence of cellulose nanofibers on the thermal conductivity of epoxy composites

The composites comprising vertically aligned network of copper nanowires (CuNWs) in the presence of cellulose nanofibers were fabricated by using the freeze‐templating method and the effect of aspect ratio (A/R) of CuNWs on the thermal conductivity of epoxy composites was investigated. The thermal conductivity of epoxy composites increased to 0.79 W m^?1 K^?1 at 1.12 vol% of high A/R CuNWs loading, corresponding to the thermal conductivity enhancement of 365% as compared to the pure epoxy. The thermal conductivity of vertically aligned higher A/R CuNWs/epoxy, which is 38.5% and 51.9% higher than those of the lower A/R CuNWs and the randomly aligned CuNWs, respectively. The application of the epoxy composites in heat dissipation was demonstrated by the temperature changes of composites on a hot plate with the increase of heating time. These results indicate that the thermally conductive composites in this study could be applied for thermal dissipating materials in electronic devices.     

2009年亚锦赛决赛中国女排失利的因素分析

通过查阅国内期刊库和及观看比赛回放等途径,从非技术因素和技术因素方面对2009年亚州女子排球锦标赛中国女排和泰国女排比赛失利进行分析.结果表明：中国女排失利的原因主要有心理状态不佳、伤病因素、教练因素及发球拦网一传等技术环节的失误.通过进行全方位的分析为中国女排再创辉煌提供理论上的参考.     

添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

片状云母径厚比表征方法研究

片状材料的径厚比是片状材料的一个重要特征参数。以片状云母为研究对象,引入形状明显区别于片状云母的聚苯乙烯球作为支撑材料。实验结果表明,当云母片与聚苯乙烯球混合质量比为1∶3时,呈竖立取向云母片的数量达到最大值,随机采集200个云母片的长径和厚度,其径厚比的统计样本均值为15.37。支撑材料聚苯乙烯球为片状云母带来大量支撑位点,显著提高片状云母呈竖立取向的概率,能够快速、直观地同时测量云母片的长径和厚度,有效提高云母片径厚比的测量效率和准确性。