Hyperparameter on-line learning of stochastic resonance based threshold networks

Aiming at training the feed-forward threshold neural network consisting of nondifferentiable activation functions, the approach of noise injection forms a stochastic resonance based threshold network that can be optimized by various gradient-based optimizers. The introduction of injected noise extends the noise level into the parameter space of the designed threshold network, but leads to a highly non-convex optimization landscape of the loss function. Thus, the hyperparameter on-line learning procedure with respective to network weights and noise levels becomes of challenge. It is shown that the Adam optimizer, as an adaptive variant of stochastic gradient descent, manifests its superior learning ability in training the stochastic resonance based threshold network effectively. Experimental results demonstrate the significant improvement of performance of the designed threshold network trained by the Adam optimizer for function approximation and image classification.     

多级孔板提高井筒气体携液能力实验研究

气井生产时，井底积液会影响气井产量，甚至导致气井停产。加入泡沫剂、更换小直径油管或氮气举升等措施排出井底积液是保证气井生产的重要手段，但造成液体回流的井筒结构并没有变化。改变适合于单相流体的均一井筒结构，降低气液两相流中液体在井筒的回流，提高气体携液能力，形成适用于气液两相流的井筒结构，可以改善气井生产。实验设计了安装于管筒内的类似于倒置漏斗形的多级孔板装置，以井底气体为动能，借助“爬楼梯”原理，利用孔板减少或阻止液体回流，使液体通过多级孔板逐级上升；实验利用气体压缩机提供气源，测试了不同气体流速下，加入孔板对于气体和泡沫携液能力的影响。实验表明，在管筒内加入液体回流限制装置，大幅度地提高了管筒的气体携液能力和排液效果，减少了管筒液体回流量，降低了气体排液和泡沫排液的气体流速临界值。多级孔板可用于气井增产，能够提高气体携液能力，提高泡沫携液效果，降低泡沫剂的使用量和井底残液，但在实际生产中气体流量和装置的匹配性，还有待于在现场试验中进一步验证和优化。     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

基于炉灶热量回收的吸热装置设计

设计了一种基于炉灶热量回收的吸热装置。该装置通过将导热性能及焊接性能优良的无氧紫铜管与炉灶支架焊接成一个整体,近距离吸收炉灶火焰四周散失的热量,利用火焰散失的热量给生活用水加热,将生成的热水供日常生活使用;对出水装置进行改良,使其与加热装置形成循环结构,达到对整个系统进行保护的目的。本装置提高了对能源的利用率,减少了能源消耗,达到节能的目的。     

VRPTW的扰动恢复及其TABU SEARCH算法

本文对带时间窗的车辆路线安排扰动恢复问题进行了讨论,分析了各种可能的扰动:增加减少客户,时间窗、客户需求及路线可行性的扰动,构造了扰动模型.利用禁忌搜索算法对问题进行求解,同时通过对模型参数重新设置,得到了多个满足要求的不同的解,这样使解更具有实际可行性和有效性.     

惯性导航系统水平阻尼网络的自适应控制

当海况变化较大时，惯性导航系统(INS)的误差振荡幅度较大．为了减小系统误差的振荡幅度，提出了一种新的设计思想，采用自适应控制方法，根据实际的海况变化情况，实时校正阻尼参数，使由舰船的机动性造成的系统误差最小．结果表明，与传统方法相比，水平误差角振荡幅度减小了约50％，速度误差振荡幅度减小了约30％．经度、纬度和航向误差振荡幅度也有明显改善；水平阻尼网络的自适应控制有效地改善了INS的动态性能．     

用自适应脉冲微扰引导混沌系统到周期解

用自适应脉冲微扰方法控制的系统的某个系统变量作为驱动,设计了一种自适应控制器方法对两个或多个响应混沌系统进行脉冲微扰,引导这些系统从混沌运动到低周期运动,实现同时控制多个混沌系统到不同的周期态. 当选择相同的自适应控制器输入变量实施脉冲微扰时,还可控制两个或多个混沌系统达到不同的周期态同步. 通过对R?ssler混沌系统的仿真研究证实了方法的有效性. 关键词： 混沌控制 系统参量 自适应控制器 脉冲微扰 周期态同步     

All-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity

A novel scheme for all-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity is proposed and investigated numerically. The results show, for a 2.5 GHz driving pulse train, it can be generated 5-25 GHz repetition rate pulse trains with low clock amplitude jitter, polarization independence and high peak power. Furthermore, the extraction of the clock signal from a pseudorandom bit sequence signal can be realized based on the proposed scheme.