Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

KMnO4引发魔芋粉-丙烯腈的接枝共聚反应

以KMnO4为引发剂进行魔芋粉与丙烯腈的接枝共聚反应。研究了魔芋粉预氧化时间、引发剂浓度、单体浓度、酸度、反应时间、反应温度和反应物加料方式等聚合条件对接枝效率的影响，并对接枝机理作了探讨。     

Synthesis and characterization of surface-cyanofunctionalized poly (N-isopropylacrylamide) latexes

 A series of P[N-isopropylacrylamide (NIPAM)] latexes with different contents of cyano groups were successfully prepared by either seeded or shot-growth polymerizations of an aqueous solution containing acrylonitrile (AN) onto a seed P[NIPAM] latex, respectively, and further characterized by FT-IR, ¹H-NMR, elemental analysis, as well as by quasielastic light scattering (QELS) and scanning electron microscopy (SEM). All prepared surface-cyanofunctionalized P[NIPAM] latexes exhibited the same range of lower critical solution temperature (LCST) as a pure P[NIPAM] latex. The shot polymerization process proved more efficient at yielding cyano derivatized latexes than the seeded polymerization technique. The amount of incorporated cyano groups onto the particles was determined with a good correlation both by ¹H-NMR and elemental analysis. The higher the amount of initially introduced AN monomer in the reaction mixture, the more cyano groups were incorporated onto the particles. The surface of the particles with high content of cyano groups appeared quite rough by SEM in comparison with that of the pure P[NIPAM] particles. Received: 25 February 1998 Accepted: 23 June 1998     

Thermal Analysis of Acrylonitrile Polymerization and Cyclization in the Presence of N,N-Dimethylformamide

This paper examines the polymerization of acrylonitrile to poly(acrylonitrile)(PAN), and its cyclization, in bulk form and using N,N-dimethylformamide (DMF) as solvent in which both monomer and polymer are soluble. Thermal analysis of the resultant products after polymerization has been performed by DSC and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). Scanning electron microscopy has been used to study the morphology of the resultant products and after thermal treatments. The DSC thermal curve of PAN-DMF sample is quite different from the PAN bulk sample, showing a single sharp exothermic peak associated with nitrile group polymerization (cyclization) of PAN at lower temperature (240°C) than that of bulk PAN sample (314°C). Cyclization of PAN was confirmed by IR spectroscopy. It was found that the amide molecules are difficult to eliminate completely in the product obtained after the polymerization reaction, even after prolonged heating at 110°C, and remain occluded. The formation of a complex by dipolar bonding is also possible and it is discussed. It is concluded that the amount of heat evolved as well as the temperature interval over which it is released are influenced by the chemical processing of PAN when using DMF as solvent of both monomer and polymer. Pyrolysis of these PAN samples revealed the release of occluded molecules of DMF, and several compounds containing nitrogen produced from the thermal degradation processes. All these results are interesting to know the chemical processing of carbon fibres and activated carbon fibres from PAN modified precursors.This revised version was published online in November 2005 with corrections to the Cover Date.     

丙烯腈中微量有机杂质的测定

本文采用ＸＥ－６０交联弹性石英性细管柱及４０７有机体埴充柱气色谱法可分分析丙烯腈中有机杂质。通过对柱长、担体粒度、液膜厚度、柱温和载气流量的选择。确定出最佳色 谱条件。     

取代茚基稀土配合物/添加剂体系催化丙烯腈聚合

研究了取代茚基稀土配合物 /添加剂体系对丙烯腈的聚合 ,发现季胺盐及芳氧钠是取代茚基二价稀土配合物催化丙烯腈聚合的有效添加剂 ,其中Me3NC1 6 H33Br效果最好 ,5种二价稀土配合物 (C5H9C9H6 ) 2 Yb (THF) 2 ,(C5H9C9H6 ) 2 Sm (THF) 2 ,KSm (C5H9C9H6 ) 3(THF) 3,(PhCH2 C9H6 ) 2 Sm(THF) 2 和 (CH3CH2 C9H6 ) 2 Sm (THF) 2 与Me3NC1 6 H33Br构成的催化体系对于丙烯腈聚合都显示出好的催化活性。对(C5H9C9H6 ) 2 Yb(THF) 2 /Me3NC1 6 H33Br体系而言 ,在丙烯腈中当催化剂用量为 2× 10 - 5mol·g - 1时 ,丙烯腈聚合的最大转化率为 61%。     

Hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s: swelling behavior and water states

Hemocompatibility is an essential aspect of blood contacting polymers. Knowledge of the relationship between polymer structure and hemocompatibility is important in designing such polymers. In this work, the effect of swelling behavior and states of water on the hemocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP) films was studied. Platelet adhesion and plasma recalcification time tests were used to evaluate the hemocompatibility of the films. Considering the importance of surface properties on the hemocompatibility of polymers, static water contact angles were measured by both sessile drop and captive bubble methods. It was found that, on the film surface of PANCNVP with a higher NVP content, adhered platelets were remarkably suppressed and the recalcification time was longer. The total water content adsorbed on the PANCNVP film was determined through swelling experiments performed at temperatures of interest. Differential scanning calorimetry and thermogravimetric analysis were used to probe the states of water in the films. Based on the results from these experiments, it was hypothesized that the better hemocompatibility of PANCNVP films with higher NVP contents was due to their higher free water content, because water molecule exchange at the polymer/liquid interface, facilitated by a high free water content, is unfavorable for the formation of surface bound water, which causes poor hemocompatibility. [diagram in text].     

高锰酸钾引发下淀粉／丙烯腈的接枝共聚反应

以高锰酸钾为引发剂,系统研究了在淀粉与丙烯腈接枝反应过程中各种反应对数如反应温度,单体浓度,引发剂浓度,催化剂浓度,淀粉的预处理温度对淀粉接枝反应及共聚物组成的影响,探讨了不同来源的淀粉和不同玉米变性淀粉接枝反应的能力,并分析了在反应过程中锰离子价态的变化,为进一步搞清锰离子引发淀粉接枝反历程提供了依据。     

电引发丙烯腈聚合

以Pb为阴极，Pt为阳极，在特别设计的电解池阴极区内，电引发硝酸溶液中丙烯腈（AN）后聚合。动力学研究表明，聚合速度与电解电量和硝酸浓度成直线关系，与单体浓度的平方成正比。根据聚合物溶液浓度对光密度关系，认为聚合作用是由AN－HNO3络合物在阴极上俘获电子后产生的硝基丙腈自由基所引发。