儿童的铅中毒问题──Ⅱ．彩色油墨中铅的测定

用能量色散Ｘ射线荧光分析法测定了某厂生产的４４种彩色油墨纸中的铅含量．结果发现，除５种油墨外，其它３９种彩色油墨纸中的铅含量均比对照纸中高９倍以上，其中桔黄色、桔红色树脂胶版油墨高５００倍以上，棕色树脂胶版油墨高３７９倍，深黄色和柠檬黄色树脂铅印油墨分别高１７０和１１３倍．这表明，彩色油墨印刷品可能是儿童慢性铅中毒的重要污染源．     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

X射线荧光光谱滤纸片法测定矿石中的铜

我们用Ｘ射线荧光光谱滤纸片法分析了古今１３铜矿石样品中的铜含量，测量结果与化学法一致。此法不需要铜矿石的标样，而且手续简单，方便，检出限低，灵敏度高，测量结果正确可靠，是分析矿石中单一或几个元素的含量较好的方法之一。     

高分辨双晶XRF研究酞菁化合物中硫杂质的化学态

酞菁化合物是一种大π键共轭体系的平面分子结构，它以颜色鲜艳、化学稳定性和价格便宜等特点，已在颜料工业上得到了广泛地应用．随着高科技的发展，酞菁化合物的应用进入静电复印的领域．研究中发现：酞普化合物的晶体结构直接影响它的色泽、耐热性、稳定性以及光电导性．在诸多的酸苦晶型中，β-型酞菁是比较稳定的一种，其它晶型届亚稳态型．近年来，光敏性较好的X-型用于激光印刷机感光鼓的载流子产生层［1］．用作静电复印中的酞育粗颜料，一般多为a一型，且含有大量的有机和无机杂质[2]，经高温真空升华提纯后，转变为卢一型．有趣…     

The effect of Pb and other elements found in recycled polypropylene on the manufacturing of lead-acid battery cases

Polypropylene (PP) is one of the most common plastics used in the manufacturing of lead-acid battery cases, where the recycling of the material has become common practice, being both economically viable and environmentally friendly. During the recycling process, the various components of the spent battery are separated, where the crushed battery case is washed in order to remove any excess acid and lead-containing particles. The plastic components are subsequently melted and extruded into pellets that are then blended with virgin material to injection mold new battery cases and lids. This study showed that a significant amount of lead-containing particles in the form of lead dioxide and lead sulfate remain in the recycled plastic, and are evenly distributed throughout the polymer matrix. TEM studies showed that the particles are less than 1 μm in size and X-ray diffraction analysis of ashed recycled PP samples showed the presence, amongst others, of talc, calcium carbonate, rutile and iron oxide. These compounds come from a range of fillers, flame-retardants, colorants and impurities that originated from the various original battery cases that were recycled. The study showed that modern X-ray fluorescence (XRF) analysis is a quick and reliable method to quantify the amount of the elements found in the plastic and that the concentration of Pb in the plastic can be used as a type of “tracer” to determine the amount of recycled PP used in the manufacturing of a particular battery case. The study also showed that there is possible environmental contamination, in particular with Pb and Br contained in recycled PP during the injection molding process and the burning of the plastic. The Pb- and Br-containing particles are small enough to become air-borne during the burning process of the plastic, resulting in them being part of the soot and other hydrocarbon oils that are emitted. No Pb was observed in the gases emitted during simulated low-temperature injection molding conditions; however, a significant amount of Br was detected in the gases at the lower temperatures. Clear environmental waste classification of the battery case plastic should be done before its final incineration where the amount of trace metals present and its possible contamination to the environment should be considered. Care should also be taken for machine operators who work with the recycled plastic, that no excessive exposure to the halogenated compounds is experienced.     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

X射线荧光光谱法在稀土元素分析中的应用

本文研究了Ｘ射线荧光光谱在混合稀土氧化物和高纯稀土氧化物分析中的应用，并探讨了在常量分析中影响分析准确度和精密度的主要因素；样品及标样制备，基体效应校正方法在痕量分析中降低检测限的方法，选择最佳测量条件，降低背景，与分离富集手段相结合，取得满意的结果。     

Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000–2003, from the northeast-Hungarian section of the Tisza, Szamos and Túr rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the “hot” samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals.     

X射线荧光分析中熔融制样条件的研究

本文研究了熔融制样时熔融温度、熔融时间和脱模剂的加入量对分析结果的影响。研究结果表明,随着熔融温度的升高和熔融时间的加长,分析结果的总值将随之增大。相反,脱模剂量的增加会使分析结果降低。通过对熔融样品时产生的升华物的研究,发现在熔触过程中,四硼酸锂比样品以更大的比例逸出熔融体,从而造成了样品在分析圆片中的相对浓缩。而且在高温熔融时,钾和钠比样品中的其他元素例如硅、铝、铁、钛、钙、镁等更易于逸失。制样条件的不同引起样品和熔剂逸失的比例会有变化,它直接影响测定的结果,这证明了在X射线荧光光谱分析中保持制样条件一致的重要性。