Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

GRAFT COPOLYMERIZATION OF VINYL MONOMERS ONTO STARCH INITIATED BY TRANSITION METAL-THIOUREA REDOX SYSTEMS

In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiatedby Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in thepresence of sulfuric acid of different concentrations. It was shown that the grafting capabili-ty of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initia-tor, the effects of various acids (HClO_4, H_2SO_4, HNO_3, HCl) on the graft copolymerizationof acrylonitrile onto starch were discussed, and the capabilities of graft copolymerizationof methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch wereinvestigated. The experimental results show that the order of the influences of differentacids is HClO_4>H_2SO_4>HNO_3>HCl, and the order of grafting capabilities of differentmonomers grafted onto starch is MMA>AN>AM>AA. The structure and morphology ofgraft copolymers were studied with infrared spectroscopy and scanning electron microscopy.The size, shape and roughness of surface of the grafted starch granules are changed aftergrafting.     

小米乳在冰淇淋中的应用研究

详细介绍了以小米替代淀粉,研制的具有天然色香味的小米冰淇淋的生产工艺及配方。小米冰淇淋营养丰富、成本低、工艺简单、具有一定的推广价值。     

Silicone-modified starch/protein microparticles: protecting biopolymers with a hydrophobic coating

Silicone-coated starch/protein (human serum albumin, HSA) microparticles were prepared by precipitation of a starch/HSA/DMSO/water (water-in-oil) emulsion into acetone containing a silicone: the silicone polymer was either unfunctionalized (SiMe₃ terminated, PDMS) or functionalized at its termini with Si(OEt)₃ groups (TES-PDMS). The microparticles of approximate diameter 2–7 μm were highly hydrophobic with advancing contact angles 115°. Over several minutes, however, the contact angle decreased to ca. 40–70°. Soxhlet extraction with water led to degradation of the microparticles, irrespective of the nature of their silicone coating, as evidenced by release of the protein from them. Intraperitoneal (IP) or gastric administration of the two different particles to mice, however, showed a clear difference between the two silicones. The microparticles coated with either PDMS or TES-PDMS led to very different immune responses. Oral administration of the microparticles prepared with functionalized silicone elicited a significant production of antibodies, whereas the particles prepared with the unfunctionalized silicone (PDMS) were only weakly active. By contrast, the IP results demonstrated that particles coated with PDMS elicited an immune response that was established much more rapidly than with the particles modified with TES-PDMS. It is proposed that the TES-PDMS forms a physically adhering film or covalent bond to the protein molecules, which serves to protect the microparticle from biological degradation in the gut and/or facilitates the microparticle/protein interaction with the immune system.     

巴特沃斯低通滤波器的简化快速设计

本文通过建立巴特沃斯低通滤波器设计的数据库，进行滤波器的设计。     

淀粉-苯乙烯接枝共聚物作防水涂料的研究(Ⅲ)

本文介绍了通过接技共聚反应，将淀粉与苯乙烯接枝改性，与废ＰＳ混溶，制得一种性能优良的纸品防水涂料。     

PS-I型阴离子淀粉的研制

采用干法工艺，以磷酸一钠、磷酸二钠和三聚磷酸钠作酯化剂，脲作氮化剂和催化剂，合成了ＰＳ－Ｉ型阴离子淀粉。实验对制备因素、温度、酯化剂用量以及反应时间作了全面考查。实验结果表明用三聚磷酸钠作酯化剂比磷酸一二钠为好，反应在１３０－１４０℃，２－３小时，可以获得白度７５－８０，给合磷为０．５０％左右，含氮量≥０．４％的制品     

疏水化淀粉衍生物研究进展

淀粉化学品已广泛应用于各行各业,但由于传统淀粉化学品只有单一的亲水性,应用受到限制。淀粉的疏水化改性是提高淀粉化学品应用性能、赋予淀粉新的性能和功能性、进而拓宽淀粉化学品应用领域的重要方法,淀粉的疏水化改性已成为目前国内外的研究热点。本文综述了近年来制备的新的疏水化淀粉衍生物及其制备新工艺和性能研究方面的进展。     

Preparation and properties of luffa fiber- and kenaf fiber-filled poly(butylene succinate-co-lactate)/starch blend-based biocomposites

Biodegradable poly(butylene succinate-co-lactate) (PBSL)/starch blends that contain various amounts of starch were prepared. In addition, luffa fiber (LF) and kenaf fiber (KF) were incorporated, individually, into PBSL/starch (70/30) blend to achieve biocomposites. The LF and KF were treated with NaOH_(aq) prior to their addition to the blend. The Young's modulus and flexural modulus of PBSL increased with the addition of starch and increased further after the formation of the biocomposites. The highest Young's modulus increment, which was found in the KF-added system, was up to a 2.2-fold increase compared with neat PBSL. The tensile/flexural/impact strength of PBSL declined after the formation of the blends. With the further addition of LF/KF, the said properties leveled off. The blends exhibited higher complex viscosity and dynamic storage modulus in the melt state than the neat PBSL, and the values further increased in the biocomposites. The crystallization temperature of PBSL slightly decreased in the blends. By contrast, the biocomposites showed an increment in PBSL crystallization temperature, from 73.0 °C (PBSL) to 75.3 °C (KF-added composite), thereby confirming the surface nucleation effect of LF/KF. The blends showed a higher degree of water absorption than PBSL. The formation of biocomposites led to an even higher degree of water absorption. The current approach of including LF/KF in the PBSL/starch blend to enhance the rigidity and biodegradability was advantageous in expanding the applications of PBSL.     

Starch nanoparticles as a bio-nanocatalyst in synthesis of diheteroaryl thioethers

Nanostarch is shown to be a highly efficient, eco-friendly and heterogenous organocatalyst for the synthesis of the diheteroaryl thioethers via one-pot reaction of methylcarbonyls, thiourea and iodine in DMSO. This method offers significant advantages such as available starting materials, higher purity and excellent yield of products, very easy reaction conditions and absence of any tedious purification. Furthermore, because of employing eco-friendly catalyst without using transition metal catalysts, this novel method emerges as a green-approach leading to less harmful residues. Moreover, a mechanism was proposed to rationalize the reaction and the role of starch nanoparticles was also investigated in these transformations.