粒子-转子模型和推转壳模型中的能谱统计分析

用粒子–转子模型和推转壳模型研究了6个粒子分别填充在单j壳和双j壳上的混沌行为.分析了单j壳和双j壳情况下能谱的最近邻能级间距分布和谱刚度随自旋及推转频率的变化,结果表明,当组态空间大小不变时,系统在双j壳(g_7/2+d_5/2)情况下比在单j壳(i_13/2)情况下更规则,而当组态空间从单j壳(i_13/2)扩大到双j壳(i_13/2+g_9/2)时,系统的混沌程度变化不大.同时比较了将6个粒子的两体相互作用分别取为δ力和对力时的系统的混沌行为     

前缘弯掠斜流转子叶顶间隙流动特性数值分析

本文对前缘弯掠斜流转子叶顶间隙内的流动特性进行了数值分析。结果表明:叶顶间隙气流与主流发生卷吸而生成泄漏涡。泄漏涡作用的区域具有较低的压力分布。在叶片通道内,泄漏涡沿着与转子旋向相反的方向朝相邻叶片的压力面移动。大间隙时的泄漏涡比小间隙时强烈。低流量时泄漏涡的作用区域比高流量时大。在各种流量特性下,叶顶尾缘近吸力面区域都存在着二次间隙流。     

New protonic solid electrolyte with tetragonal tungsten bronze structure obtained through ionic exchange

Proton exchange reactions have been performed on tetragonal tungsten bronze-like NaNbWO₆ by using nitric acid as an exchanging agent. The characterization of the exchange reaction products has been made by means of chemical analysis, X-ray diffraction, thermal analysis, and IR spectroscopy. The exchange reaction takes place topotactically and the following formula is proposed for the obtained phase of variable composition: Na_1−xH_xNbWO₆·yH₂O (0<x?0.46 and 0?y?0.12). Impedance spectroscopy on the present proton exchanged samples indicated that these samples behaved as solid electrolytes under high humidity. As an example, the compound with the composition Na_0.68H_0.32NbWO₆·0.1 H₂O exhibits ionic conductivity of 8×10⁻³ and 1×10⁻² S cm⁻¹ at 70°C and 90°C, respectively.     

A highly selective solid phase extraction sorbent for pre-concentration of sameridine made by molecular imprinting

Summary A novel approach to solid phase extraction, based on the use of a highly selective molecularly imprinted polymer, is presented. The versatility of this type of sorbent for solid phase extraction was demonstrated in a model batch-wise pre-concentration of sameridine prior to gas chromatography. Problems associated with leakage of remaining imprint molecules during the desorption phase could be eliminated by the use of a close structural analogue of sameridine as the imprint species. It was found that a major benefit of the imprinted polymer was its specificity, which lead to distinctly cleaner chromatographic traces and ability to improve sensitivity by extracting sameridine from larger sample volumes.     

Electrochemical formation and composition analysis of Zn x Cd1-x Se solid solutions

The direct growth of ZnSe–CdSe solid solution onto metallic cathodes by electrodeposition from acidic aqueous sulphate solutions is described. The plating process is studied by simple voltammetry, while the structure and composition of the electrolytic deposits are investigated by X-ray diffraction. The experimental d-spacing values of the as-grown mixed lattice are compared to data from reference Zn _x Cd_1-x Se pellets of standard composition, produced by a sintering method. The findings are supplemented with energy-dispersive X-ray (EDX) elemental analysis. Thereupon, the variation of the mole fraction x in Zn _x Cd_1-x Se, and the solid phase constitution of the electrodeposits are determined and correlated to the electrochemical conditions of growth. The resulting films contain admixtures of CdSe compound and metallic Cd.     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

三羟甲基甲胺、季戊四醇及其二元体系固-固相变的变温红外光谱研究

利用傅里叶变温红外光谱仪分别测定了三羟甲基甲胺（TAM）、季戊四醇（PE）及其二元体系变温红外谱。实验表明，多元醇分子中羟基吸收峰随温度升高耐发生位移向高波数移动，此结果既能反映多元醇及其二体系固－固相变的温度区间，又与转变热相对应，从而揭示了多元醇及其二元体系固－固相变贮热的机理。     

Topochemically Controlled Redox Reactions in the System In/Sn/Cl

The difference in reactivity of the two modifications of InCl in solid state reactions with SnCl₂ is discussed. It is explained on the basis of semi‐empirical and ab initio calculations giving the density of states diagrams of InCl and the energies of possible disproportionation reactions. Their general features are discussed on the basis of a simple bonding picture for open‐packed structures involving inert pair elements. A detailed analysis of the DOS distribution allows to pinpoint the observed redox instability to a specific structural feature of α‐InCl.     

固相微萃取法-气相色谱-质谱联用技术简化分析生活污水

用不同的固相微萃取（SPME）针头结合气相色谱－质谱分析对生活污水进行提取、浓缩、分离、测定，对照结果表明，用聚硅氧烷涂层可以减少一次分析化合物的种类，提高分析的准确性。