The flow of a variable viscosity fluid between parallel plates with shear heating

A model for the flow of a fluid through a channel with parallel plates is investigated. The channel is narrow, so that the lubrication approximation may be applied. The channel walls are maintained at a constant temperature. Shear heating effects are included and the fluid viscosity decreases exponentially with temperature. When the flow is driven solely by shear stress or imposed velocity at the top, analytical progress is possible. When pressure gradient also drives the flow the problem is solved numerically.     

Comparison of a pump-around, a diffusion-driven, and a shear-driven system for the hybridization of mouse lung and testis total RNA on microarrays

In the present study, we demonstrate the benefits of a shear-driven rotating microchamber system for the enhancement of microarray hybridizations, by comparing the system with two commonly used hybridization techniques: purely diffusion-driven hybridization under coverslip and hybridization using a fully automated hybridization station, in which the sample is pumped in an oscillating manner. Starting from the same amount of DNA for the three different methods, a series of hybridization experiments using mouse lung and testis DNA is presented to demonstrate these benefits. The gain observed using the rotating microchamber is large: both in terms of analysis speed (up to tenfold increase) and in final spot intensity (up to sixfold increase). The gain is due to the combined effect of the hybridization chamber miniaturization (leading to a sample concentration increase if comparing iso-mass conditions) and the transport enhancement originating from the rotational shear-driven flow induced by the rotation of the chamber bottom wall.     

钢筋混凝土薄钢板组合剪力墙的弹性屈曲临界荷载

研究钢筋混凝土薄钢板剪力墙在侧向力作用下的弹性掘曲临界载荷计算问题,提出了相应的计算模型,导出了计算公式,并与相应实验结果比较,符合良好。     

斜截面上剪应力的一个公式

以线性变换作为应力状态的一个数学模型,利用代数的理论,得到了斜截面上剪应力的一个新公式,同时指出了它在应力分析中的应用。     

橡胶中简单剪切与纯剪切的关系

研究了简单剪切与纯剪切的关系，得出了：（１）简单剪切可看成纯剪切加转动，转动角θ有；（２）若简单剪切椭圆的长轴与坐标轴Ｘ的夹角为φ，相应的纯剪椭圆长袖与坐标轴ｙ的夹角为β０，则φ＝β０；（３）橡胶在双向拉伸时剪应变γ的一般表达式为，对简单剪切而言即为     

Peculiarities of changes of some physicomechanical characteristics of monoisotopes B, B and natural β-boron

Real structure and some physicomechanical characteristics of the samples of natural beta-rhombohedral boron B as well as of its ¹⁰B and ¹¹B monoisotopes have been studied. It was shown that the influence of ¹⁰B and ¹¹B isotopes on physicomechanical properties of boron had a different character. In particular, the samples enriched with ¹¹B had high values of microhardness, shear modulus (SM) and elastic limit if compared to those of boron, while the samples enriched with ¹⁰B monoisotopes were characterized with high values of thermal expansion coefficient (TEC) and thermal conductivity; lattice parameters a and c increased by the sequence: ¹¹B, B, ¹⁰B. It was established that TEC, thermal conductivity, microhardness, SM and shear elastic limit increased in all samples at annealing for 5 h at 1500 °C regardless of isotope content.     

MORPHOLOGICAL STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE POLYESTER——MORPHOLOGY OF SHEAR ORIENTED FILMS

The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.     

沥青材料的感温性分析

在分析现有沥青感温性指标的基础上，讨论了针入度指数的局限性，认为采用粘温指数[VTS]能够合理表征沥青在路面服务温度内的感温性。并建立了针入度和粘度的换算关系，通过3种沥青实例计算了其[VTS]，再分析了计算模型的局限性和改性措施。结果表明，通过采用动态剪切流变仪或针入度试验结果换算出沥青粘度，来求算[VTS]是可行的。     

Oblique Perforation of Thick Metallic Plates by Rigid Projectiles

Oblique perforation of thick metallic plates by rigid projectiles with various nose shapes is studied in this paper. Two perforation mechanisms, i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose, are considered in the proposed analytical model. It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers, i.e., the impact function, the geometry function of projectile, the non-dimensional thickness of target and the impact obliquity. Explicit formulae are obtained to predict the ballistic limit, residual velocity and directional change for the oblique perforation of thick metallic plates. The proposed model is able to predict the critical condition for the occurrence of ricochet. The proposed model is validated by comparing the predictions with other existing models and independent experimental data.The English text was polished by Keren Wang