集成电路高精度高速度在线电阻检测

本文提出的具有粗、精测双回路的测试系统,可兼顾电阻在线检测过程中的高精度与高速度问题。该系统各器件间的信息交换满足IEEE-488标准。     

结构可靠度分析非线性抗力函数线性化问题的研究

本文研究了非线性抗力函数线性化处理方法，以简化极限状态方程代替实际极限 状态方程对可靠度分析的影响。文中以钢筋混凝土两种实际构件为例，用实际极限状 态方程作了可靠度计算，并与简化方程作了对比分析．     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Resistance distance and Laplacian spectrum

The resistance distance r _ij between two vertices v _i and v _j of a (connected, molecular) graph G is equal to the resistance between the respective two points of an electrical network, constructed so as to correspond to G, such that the resistance of any two adjacent points is unity. We show how the matrix elements r _ij can be expressed in terms of the Laplacian eigenvalues and eigenvectors of G. In addition, we determine certain properties of the resistance matrix R=||r _ij ||. AcknowledgementsThis research was supported by the Natural Science Foundation of China and Fujian Province, and by the Ministry of Sciences, Technologies and Development of Serbia, within Project no. 1389. The authors thank Douglas J. Klein (Galveston) for useful comments.     

不同地理种源侧柏对侧柏绿胶杯菌抗性的测定试验

收集侧柏２１个种源,经繁育定植后,连续３年逐年测其对侧柏绿胶杯菌的抗性。其分析结果表明,不同地理种源侧柏之间其生长状况的优劣与抗病性关系不大,同一种源内生长势良好者其感病指数较轻;种源之间对绿胶杯菌的抗性存在有明显的差异,其中抗性较强的有河北民寿,山西晋城,贵州黎平,山西交城和陕西华阴种源,但是均未达到可以用以进行病害防治的高度抗病的程度。     

Resistance analysis for enhanced wastewater membrane filtration

This study investigated enhancement techniques for synthetic wastewater filtration in a membrane bioreactor (MBR) at mixed liquor suspended solids concentrations (MLSS) of 12–18 g/L. Air sparging (AS), backflushing (BF) and a combined application of both (AS + BF) were applied to increase permeate flux compared to the conventional application (NON). Scanning electron microscope (SEM) measurements of cake thickness served for evaluating cleaning effectiveness and as input data for some of the model calculations. AS + BF showed the lowest overall resistance, and thus the highest permeate yield, for about 2 weeks of observation. The contribution of fouling resistance, cake resistance and membrane resistance to the overall resistance was evaluated, based on experimental data. Air sparging significantly lowered cake thickness and consequently cake resistance. The experimental cake resistance and the model resistances were compared. A model based on the measured cake thickness and literature values for the specific surface area proved most successful. Finally, a relationship between the backflush resistance and the permeate flow resistance was observed.     

LD5 高筋薄壁锻件的等温锻造工艺研究

依据ＬＤ５铝合金等温锻造成形高筋薄壁锻件的工艺，在实验室对引入形变热处理的必要性及其工艺规范进行了探讨。对比分析了润滑剂类型、变形温度、保温时间和压力机速度等工艺参数对材料成形性能及组织性能的影响。研究表明，在较低温度下的预变形毛坯，在再结晶温度以上进行锻造，将发生回复和再结晶使晶粒细化，从而达到降低变形抗力、提高塑性、改善充填性之目的。扩展了ＬＤ５成形复杂高筋薄壁锻件的应用范围。     

Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: Analysis of required conditions

This paper investigates the essential conditions to improve the accuracy of a resistance spot welding computational study of advanced zinc coated steel sheets using rounded tip electrode. An experimental analysis is performed to highlight the required considerations for a suitable simulation. A sequential Electrical-Thermal-Metallurgical and Mechanical (ETMM) finite element analysis with appropriate precautions of the contact conditions enables to accurately simulate the nugget development during the welding. A critical smooth evolution of the contact radius is required. A fine meshing with an interfacial mesh size of at least 0.05 × 10⁻³ m combined with a coupling time step of 0.0025 s between the electrical-thermal-metallurgical and the mechanical analysis allows a regular incrementation of the contact radius, without burdening the time computing. Accurate values of the contact resistance depending on the interfacial pressure and temperature are essential for a good simulation of the nugget size. The ETMM calculation is successfully extended to the simulation of the welding of a typical two sheets assembly.     

Resistance switching memory in perovskite oxides

The resistance switching behavior has recently attracted great attentions for its application as resistive random access memories (RRAMs) due to a variety of advantages such as simple structure, high-density, high-speed and low-power. As a leading storage media, the transition metal perovskite oxide owns the strong correlation of electrons and the stable crystal structure, which brings out multifunctionality such as ferroelectric, multiferroic, superconductor, and colossal magnetoresistance/electroresistance effect, etc. The existence of rich electronic phases, metal–insulator transition and the nonstoichiometric oxygen in perovskite oxide provides good platforms to insight into the resistive switching mechanisms.     

Promotion effect of Pt on a SnO2–WO3 material for NOx sensing

Metal-oxide nanocomposites were prepared over screen-printed gold electrodes to be used as room-temperature NO_x (nitric-oxide (NO) and nitrogen dioxide (NO₂)) sensors. Various weight ratios of SnO₂–WO₃ and Pt loadings were used for NO sensing. The sensing materials were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET surface analysis. The NO-sensing results indicated that SnO₂–WO₃ (1:2) was more effective than other materials were. The sensor response (S=resistance of N₂/resistance of NO=R_N2/R_NO) for detecting 1000 ppm of NO at room temperature was 2.6. The response time (T₉₀) and recovery time (TR₉₀) was 40 s and 86 s, respectively. By further loading with 0.5% Pt, the sensor response increased to 3.3. The response and recovery times of 0.5% Pt/SnO₂–WO₃ (1:2) were 40 s and 206 s, respectively. The linearity of the sensor response for a NO concentration range of 10–1000 ppm was 0.9729. A mechanism involving Pt promotion of the SnO₂–WO₃ heterojunction was proposed for NO adsorption, surface reaction, and adsorbed NO₂ desorption.