On the optimal allocation of two active redundancies in a two-component series system

Components C₁ and C₂ form a series system. Suppose we can allocate the spare R₁ in parallel with C₁ and the spare R₂ in parallel with C₂, or otherwise, allocate R₁ with C₂ and R₂ with C₁. In this paper, we compare these two options using hazard rate ordering.     

0.8W/80K直线驱动斯特林制冷机的研制

介绍了一种 0 .8W/ 80 K分置式斯特林制冷机。该制冷机采用当前国外先进的直线电机驱动 ,双活塞对称布置结构。该制冷机已通过军品所要求的环境试验 ,输入功率小于 4 0 W(DC)情况下 ,其 +6 0℃高温环境下制冷量≥ 0 .5 W/ 80 K ,带载 0 .5 W工况下 MTTF已突破 2 0 0 0小时。文中主要论述了其工作原理、结构特点、试验情况。     

分置式斯特林制冷机失效分析

斯特林制冷机是红外探测器组件中一个关键的组成部分。目前我国斯特林制冷机的性能指标与国外同类产品差距缩短 ,但可靠性问题一直没有很好解决。文中介绍了斯特林制冷机的原理、双活塞对动型分置式斯特林制冷机的结构特点及表征参数 ;通过对产品研制开发过程中成品率低的原因分析 ,揭示了主要失效机理 ,对改进工艺和设计起到了参考和指导作用。     

Enumerating disjunctions and conjunctions of paths and cuts in reliability theory

Let G=(V,E) be a (directed) graph with vertex set V and edge (arc) set E. Given a set P of source-sink pairs of vertices of G, an important problem that arises in the computation of network reliability is the enumeration of minimal subsets of edges (arcs) that connect/disconnect all/at least one of the given source-sink pairs of P. For undirected graphs, we show that the enumeration problems for conjunctions of paths and disjunctions of cuts can be solved in incremental polynomial time. Furthermore, under the assumption that P consists of all pairs within a given vertex set, we also give incremental polynomial time algorithm for enumerating all minimal path disjunctions and cut conjunctions. For directed graphs, the enumeration problem for cut disjunction is known to be NP-complete. We extend this result to path conjunctions and path disjunctions, leaving open the complexity of the enumeration of cut conjunctions. Finally, we give a polynomial delay algorithm for enumerating all minimal sets of arcs connecting two given nodes s₁ and s₂ to, respectively, a given vertex t₁, and each vertex of a given subset of vertices T₂.     

Duane模型在斯特林制冷机研制过程中的应用

介绍一种实用的可靠性增长模型杜安 (Duane)模型 ,并探讨如何运用该模型来分析、指导斯特林制冷机的可靠性增长试验 ,包括试验前的准备、试验数据的处理、曲线的绘制 ,以及如何对增长过程进行估计和监测     

Expert consensus in solo voice performance evaluation

Experts were interviewed to identify criteria for evaluation of vocal performance. A scale was then constructed and inter- and intrajudge reliability assessed. Experts listened to 19 different performances, plus 6 presented a second time. Interjudge reliability for one judge was modest, but increased dramatically as the size of the judge panel increased. The most reliable items were overall score and intonation accuracy. Diction was less reliable than other items. Intrajudge reliability was higher for overall score than for any other item. A factor analysis on the test items yielded factors labelled intrinsic quality, execution, and diction. Another factor analysis, using the experts as variables, revealed two underlying evaluative dimensions. It was found that 13 experts were primarily influenced by execution, and that 8 were mainly affected by intrinsic quality. Interjudge and intrajudge reliabilities of these two groups differed.     

一种实用的MTBF分配方法

本文提出一种简单实用的MTBF(Mean time between failures-平均无故障工作时间)分配方法.这种方法适合于工程系统设计的对分系统的结构(可靠性模型)有了初步的了解,并能估算出各分系统故障率的情况.同时对于需要进行可靠性分配,又苦于对可靠性理论知识缺乏深入了解的人员也非常适用.     

Range reliability in random walks

This paper introduces a definition of reliability based on a process range. Thus, process failure is defined when the range of a process first reaches a given and unacceptable level. The Mean Time To Failure (MTTF) which is denned as the mean of the first time for a range to attain a given amplitude is then calculated for an asymmetric random walk process. The probability distribution of the range is then given and the process reliability over long periods of system operations are then calculated. Applications such as the control of wings movements, stock price and exchange rates volatility (defined in terms of reliability) are also used to motivate the usefulness of range processes in reliability studies. Finally, we point out that there is necessarily a relationship between the range reliability and the propensity of a series to become chaotic.     

结构可靠度分析非线性抗力函数线性化问题的研究

本文研究了非线性抗力函数线性化处理方法，以简化极限状态方程代替实际极限 状态方程对可靠度分析的影响。文中以钢筋混凝土两种实际构件为例，用实际极限状 态方程作了可靠度计算，并与简化方程作了对比分析．     

Comparability of analytical results obtained in proficiency testing based on a metrological approach

A “yes–no” type of criterion is proposed for the assessment of comparability of proficiency testing (PT) results when the PT scheme is based on a metrological approach, i.e. on the use of a reference material as the test sample, etc. The criterion tests a null hypothesis concerning the insignificance of a bias of the mean of the results from a traceable value certified in the reference material used for the PT. Reliability of such assessment is determined by the probabilities of not rejecting the null hypothesis when it is true, and rejecting it when it is false (the alternative hypothesis is true). It is shown that a number of chemical, metrological and statistical reasons should be taken into account for careful formulation of the hypotheses, enabling the avoidance of an erroneous assessment of the comparability. The criterion can be helpful for PT providers and laboratory accreditation bodies in analysis of PT results.