Physico-chemical aspects of polyethylene processing in an open mixer. Part 26: Formal kinetics of aldehyde and carboxylic acid formation at a constant rate

Formation of carboxylic acids at a constant rate can be easily explained. It seems to result from the formation and decomposition of α,γ-keto-hydroperoxides. Formal kinetics based on formation and decomposition of these structural units is in agreement with the experimental findings. The activation energy deduced from the calculations is negligible, in agreement with the experimental data showing the constant rate to be practically temperature independent. Comparison of the acids with the hydroperoxides and ketones formed initially shows that the rate of oxygen addition to alkyl radicals is significantly smaller than in low molecular mass liquids. The same conclusion is reached on comparing directly the acids formed on decomposition of α,γ-keto-hydroperoxides in polyethylene melt and in hexadecane. The rate of oxygen addition in polyethylene melt is closer to 2 × 10⁵ than to 6 × 10⁵ (s⁻¹) that is valid in hexadecane.It is possible to attribute the relatively small amount of aldehydes that might be formed at a constant rate to different reactions of alkoxy radicals that are not in a cage with other radicals. These alkoxy radicals result from the addition of peroxy radicals to unsaturated bonds. This addition is followed mainly by epoxide formation and simultaneous release of an alkoxy radical.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 29: Experimental kinetics and mechanisms of γ-lactone formation

The experimental kinetics for γ-lactone formation shows more complexity than that for acids. Nonetheless, it can be concluded to the existence of a constant rate of formation from the beginning of the experiments with polyethylene melts. There is an additional term contributing to γ-lactone formation in the initial stages that is cubic in processing time. In the advanced stages of processing, in the high temperature range (170-200 °C), the concentration of γ-lactones increases linearly with the processing time.There are many mechanisms susceptible to give γ-lactones on polyethylene melt processing. Some of them are based on decomposition of intermediates formed directly on chain propagation. This is so for the α,γ-keto-hydroperoxides in 4-position to hydroxyl groups. Since decomposition of these intermediates is very fast, the reaction might account for a constant rate of γ-lactone formation from the beginning of polyethylene processing. Decomposition of the α,δ-keto-hydroperoxides formed on intramolecular reactions on chain propagation is not so fast as that of the α,γ-keto-hydroperoxides. Nonetheless, it might account for part of the delayed formation of γ-lactones. The same is valid for the mechanisms based on peroxidation of aldehydes and γ-hydroxy trans-vinylene groups that involve intermediates that are formed on polyethylene peroxidation. They might be important for explaining the cubic term as well as γ-lactone formation in the advanced stages of polyethylene processing.     

The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

信息型常见毒物质谱用户库的建立及其在毒物快速筛选上的应用研究

质谱定性是目前世界上最通用的定性分析方法之一,在法庭科学领域毒物分析实践中,质谱一直是对未知样品进行药毒物筛选检测的利器.     

Economics of food irradiation

The number of products being radiation processed worldwide is constantly increasing and today includes such diverse items as medical disposables, fruits and vegetables, spices, meats, seafoods and waste products. This range of products to be processed has resulted in a wide range of irradiator designs and capital and operating cost requirements.This paper discusses the economics of low dose food irradiation applications and the effects of various parameters on unit processing costs. It provides a model for calculating specific unit processing costs by correlating known capital costs with annual operating costs and annual throughputs. It is intended to provide the reader with a general knowledge of how unit processing costs are derived.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 28: Formal kinetics of aldehyde and carboxylic acid formation in the advanced stages

The rate of acid formation at high temperature is constantly increasing but temperature independent. Two main mechanisms can account for this behavior in the advanced stages of polyethylene processing. The first mechanism is based on free radical induced oxidation of aldehyde pairs that are formed on acid-catalyzed decomposition of allylic hydroperoxides. The last will be formed essentially on mechanical stress-induced oxygen addition to trans-vinylene groups. Peroxidation of one of the aldehydes might yield an acyl-peroxy radical that is likely to abstract the labile hydrogen atom from the second aldehyde. The acyl radical formed in the reaction will abstract a hydroxyl group from the peracid formed in the same reaction. This yields an acid and an acyl-oxy radical that will give a primary alkyl radical on decarboxylation. The second mechanism involves oxidation of ketones and alcohols that accumulate in the oxidizing melt. Acid-catalyzed decomposition of the α-keto-hydroperoxides yields simultaneously an acid and an aldehyde. Formal kinetics based on each mechanism shows that they do not involve significant activation energy, as it is required by the experimental data. The dependency on the oxygen concentration deduced from the formal kinetics for the oxidation of aldehyde pairs is in agreement with the experiments.     

Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

Bias in modal parameters due to aliasing in the time domain

This paper deals with some aliasing effects in the time domain that can lead to unacceptable misestimations of modal parameters. When a frequency response function of a vibrating system is sampled and inverse Fourier transformed, the resulting impulse response is given by an infinite geometric series, the single term of which is the impulse response itself shifted in time. For this reason, some modal parameters, if estimated in the time domain, are biased; in particular, while the damping factor and the natural frequency are not influenced by the aliasing phenomenon, the magnitude and phase of the residue can be highly biased. Corrective terms are theoretically evaluated and their efficiency is shown in numerical simulations.

---

Sommario In questo articolo e' presentato un metodo per correggere gli errori che si compiono nella stima di alcuni parametri modali, quando essi vengono ricavati nel dominio del tempo. Infatti se la funzione di risposta in frequenza e' ottenuta con eccitazioni particolari—quali ad esempio lo pseudo-random, lo stepped-sine a passo costante o lo sweep in frequenza-la risposta impulsiva, ottenuta per mezzo dell'antitrasformata discreta di Fourier, risulta periodica, con periodo pari all'inverso della spaziatura tra le righe spettrali. Cio' comporta un errore nella stima dell'ampiezza e della fase del residuo, mentre nessuna conseguenza si ha sulla frequenza naturale e sul fattore di smorzamento. L'errore sulle stime risulta tanto piu' grande, quanto meno smorzata e' la risposta impulsiva all'interno dell'intervallo di osservazione.Partendo dall'inviluppo e dalla fase istantanea dei segnali complessi, ottenibili per mezzo della trasformata di Hilbert, si sono ricavati i termini correttivi sia per il modulo, che per la fase del residuo. La validita' delle correzioni e' mostrata con esempi numerici.

     

大屏幕彩电丽音解码技术数码处理的探讨

对彩电丽音解码技术的实现原理,系统组成及其特点进行了分析,对数字信号传输的过程,处理的方式和过程进行了探讨.