红外光谱法分析淀粉接枝聚丙烯酸酯共聚物的各级结构

研究玉米淀粉接枝聚丙烯酸酯共聚物的各级结构，主要探讨去除均聚物和玉米淀粉侧链的方法。发现以环己烷为溶剂，用索氏萃取法除去均聚物比用苯萃取法时间短、效果好；用HCl酸解法除去淀粉侧链比用HClO4氧化法简单实用。用红外光谱进一步验证了各级结构的官能团，证实了所合成的共聚物是玉米淀粉接枝聚丙烯酸酯共聚物。     

(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings.     

Polyacrylate/silica nanocomposite materials prepared by sol-gel process

Polyacrylate/silica nanocomposite was prepared by sol-gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), γ-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanocomposite was investigated in details. Dynamics Laser Scattering (DLS) indicated that the average diameter of the polyacrylate/silica latex particles (177 nm) was bigger than that of the pure polyacrylate latex particles (105.3 nm), but the ζ potential of polyacrylate/silica was decreased respectively in contrast to that of the polyacrylate. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature of polyacrylate/nano-SiO₂ (T_g = −24 °C) was higher than that of polyacrylate (T_g = −36 °C). UV analysis showed that the UV absorbency of polyacrylate/silica was improved evidently in contrast to that of polyacrylate.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

中空TiO_2微球的制备及对聚丙烯酸酯薄膜性能的影响

采用阳离子聚苯乙烯微球作为模板,钛酸四丁酯为钛源,氨水为催化剂,制备了中空TiO_2微球.采用X射线衍射、扫描电镜及比表面测定仪对其形貌和结构进行了表征,并考察了模板粒径、钛源用量以及催化剂用量对中空TiO_2微球形貌的影响.通过物理共混法将其引入至聚丙烯酸酯乳液中并成膜,研究了复合薄膜的保温性能、抗紫外性能及力学性能.结果表明,锐钛矿相中空TiO_2微球模板粒径、钛源用量以及催化剂用量影响中空TiO_2微球的空心尺寸、壁厚及壳层致密性.中空TiO_2微球可显著提升聚丙烯酸酯薄膜的保温性能、抗紫外性能和力学性能.采用不同粒径的模板制备的中空TiO_2微球对复合薄膜的各项性能均有影响,其中模板粒径为140 nm时复合薄膜性能最优,光反射率提升63%,导热系数降低27%,且在波长小于360 nm范围内,紫外透过率几乎为0,抗张强度增加100%,断裂伸长率提升62%.     

聚丙烯酸酯核／壳乳液膜的应力松弛

合成了阴离子乳化剂含量不同的５种聚丙烯酸酯核／壳乳液，分别成膜，用岛津ＡＧ－Ａ材料试验机，进行了５种膜的应力松弛试验，求出了应力松弛模量和应力松弛函数，应力松弛函数形式为Ｅ＝Ａｔ＾Ｂ，并讨论了成膜厚度对应力松弛数据的影响。     

Comparative study between core-shell and interpenetrating network structure polyurethane/polyacrylate composite emulsions

Anionic aqueous polyurethane dispersion was prepared by using carboxyl acid group to make the polyurethane dispersible, and then nanograde core-shell and crosslinked IPN structure polyurethane/polyacrylate composite latex (PUA) were synthesized by soap-free emulsion polymerization method with polyurethane dispersion as seed. FTIR, DSC, dynamic light scattering, TEM, ESCA, TGA, electronic tensile machine were employed to investigate the structures and properties of the composite latex and their polymers. Meanwhile the core-shell composite PUA emulsion and the crosslinked IPN composite PUA emulsion were compared. The results showed that the particle morphology of PUA composite emulsion is inverted core-shell structure with polyacrylate as the core and with polyurethane as the shell. The morphology of the crosslinked PUA emulsion was multi-core structure. The surface in core-shell PUA contains rich PU phase. The phase structure of the crosslinked PUA is more uniform. Three transition temperatures are observed for the core-shell composite PUA, two transitions are observed for the film from the crosslinked PUA. The TGA curves of core-shell PUA and crosslinked PUA exhibit two stages, the first stage corresponds to the thermal decomposition of hard segments in seed polyurethane; the second stage corresponds to the decomposition of soft segments in PUA and decomposition of polyacrylate. With the increase of glycidyl methacrylate (GMA) amounts in PUA composite emulsions, the tensile strength of the PUA films as well as the average diameter of the PUA composite emulsion particles increase, the elongation at break of the PUA films decreases.     

One-pot polyvinyl chloride preparation utilizing polyacrylate latex with tertiary amine groups for improved thermal stability,toughness, and reduced reactor scaling

In this paper, crosslinked polyacrylate latex with tertiary amine groups (ACLN) and base latex without tertiary amine groups (ACL) were prepared by emulsion polymerization using butyl acrylate as the monomer and 1,4-butanediol dimethacrylate as the crosslinker. Composite resins of polyvinyl chloride (PVC), ACL/PVC and ACLN/PVC, were prepared by suspension polymerization of vinyl chloride in a 20 L high-pressure reactor by adding ACL and ACLN as modifiers. The inner pressure of the reactor and initiator concentration as a function of reaction time during suspension polymerization were studied. Morphology of resin particles, processing properties, thermal stability and mechanical properties of ACL/PVC and ACLN/PVC products were investigated. A commercial PVC product named PVC-SG5 was used as the control sample for comparison. It was found that compared with typical PVC-SG5 preparation, ACL/PVC fabrication took less time while initiator concentrations needed to be increased to 2400 ppm in ACLN/PVC preparation in order to complete the polymerization within the same time. Reactor scaling occurred during ACL/PVC preparation, but could be avoided in ACLN/PVC preparation owing to the hydrophilicity of ACLN. The morphology of ACL/PVC and ACLN/PVC particles was smooth microspheres and mosaic particle shapes, respectively, the diameter of which were all smaller than PVC-SG5 particles. The covalent-bonding existing in ACL/PVC and ACLN/PVC, and ionic-bond formation of quaternary ammonium in ACLN/PVC composite resins, between tertiary amine groups in ACLN and chlorine atoms in PVC, contributed to the dramatic increase in thermal stability. ACLN/PVC exhibited the shortest plasticizing time and the longest elongation at break, followed by ACL/PVC. The toughness of both ACL/PVC and ACLN/PVC were greatly enhanced without affecting the tensile strength and softening temperature of the resin. Thus, three issues, namely, low thermal stability, low toughness and reactor scaling during polymerization of PVC have been comprehensively solved by introducing ACLN to PVC through a one-pot method.     

两类非线性光学性质稳定的交联极化聚合物

报道了两类新型含对硝基苯偶氮苯胺发色团的热交联型二阶非线性光学聚合物的合成和极化工艺，双端丙为烯酸酯的分解红（ＤＲ）－１９热聚合合生成交联型聚丙烯酸酯；双端苯酚封闭异氰酸酯端基的ＤＲ－１９与含多羟茏牟（丙烯酸－β－羟丙酯－ＤＲ－１－ＭＡＳ）共聚物反应生成交联聚氨酯，ＤＳＣ测得两者的玻璃化转变温度为１２５℃和１６０℃，旋转涂膜后在１６０℃电晕极化１ｈ可制得良好光学性质的极化膜，采用可见光吸收光谱测定