Supercritical CO2 as a superior solvent for the cyclization of diallylmalonate catalyzed by palladium-containing zeolites

Palladium-containing zeolites catalyze the cycloisomerization of diethyl diallylmalonate to dimethylcyclopentenes. When the reaction is carried out in toluene, the performance of the palladium catalyst depends on the pore size of the zeolites. At 60 °C, palladium adsorbed on large pore size Beta zeolite (pore size ∼7.4 Å) is more active than medium pore size ZSM-5 (pore size ∼5.4 Å). This lower activity of ZSM-5 compared to Beta is attributable to the restricted diffusion of reagent and products through the ZSM-5 channels as compared to Beta zeolite. However, due to the gas-like diffusion characteristic of the supercritical state, the activity of ZSM-5 increases and becomes identical to that of Beta zeolite using supercritical CO₂ as medium.     

Derivatization of 1-phenyl substituted 4-amino-2-benzazepin-3-ones: evaluation of Pd-catalyzed coupling reactions

Several Pd-catalyzed reactions were explored to further functionalize the bromo-substituted 4-amino-1,2,4,5-tetrahydro-2-benzazepin-3-one scaffold (Aba). We report in this paper suitable reaction conditions for Suzuki, Buchwald-Hartwig, and Heck reactions. The substitution pattern of the starting aminobenzazepinone turned out to be crucial for the success of these transition metal-catalyzed reactions, which often required modifications of standard literature procedures. The Pd-catalyzed methods provide access to novel substitution patterns of the Aba scaffold.     

Molecular dynamics simulation of thermodynamic properties of NaCl at high pressures and temperatures

The expansivity, constant-pressure heat capacity, and isothermal bulk modulus of sodium chloride (NaCl) have been obtained by using molecular dynamics method. The calculated thermodynamic parameters are found to be in agreement with the available experimental data. At an extended temperature and pressure ranges, these parameters have also been predicted. The thermodynamic properties of NaCl are summarized in the pressure 0-500 kbar ranges and the temperature up to 1000 K.     

Molecular dynamics simulation of P-V-T relationship of ZnO with rock-salt structure using pair-wise interactions

Molecular dynamics (MD) method is used to investigate the behavior of the pressure-volume-temperature (P-V-T) relationship, lattice constant and thermal expansivity for ZnO with rock-salt structure at high pressures and temperatures. The interionic potential is taken to be the sum of pair-wise additive Coulomb, van der Waals attraction, and repulsive interactions. The isothermal and isobaric properties are discussed from the corresponding P-V-T relationship, and it is shown that the MD simulation is successful in reproducing the measured volumes of ZnO over a wide range of temperature and pressure. Meanwhile, the equations of state parameters including lattice constant, linear thermal expansion coefficient, and isothermal bulk modulus are calculated and compared with the available experimental data and the latest theoretical results. At an extended pressure and temperature range, P-V-T relationship, lattice constant, and linear thermal expansion coefficient have been predicted. The structural and thermodynamic properties of ZnO with rock-salt structure are summarized in the pressure 0-100 GPa ranges and the temperature up to 3100 K.     

High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

A structural study of CN treated amorphous silicon

Recently, a remarkable technique to overcome the problem of light-induced degradation in amorphous silicon (a-Si) solar cells using a cyanide (CN) treatment has been developed. Structural and bonding characteristics of CN in a-Si has been studied using ab initio molecular dynamics simulations. It was found that CN incorporation results in more than just the termination of dangling bonds. The connectivity of the covalent random network increases because the CN changes from triply bonded, which is a common form in molecular CN, to the singly bonded form. This may be the mechanism by which CN incorporation produces significant reductions in light-induced degradation.     

The growth of Pd thin films on a 6H-SiC(0 0 0 1) substrate

Pd thin films, grown on Si-rich 6H-SiC(0 0 0 1) substrates, were studied by atomic force microscopy, electron diffraction and high-resolution transmission electron microscopy. It is concluded that the growth is successful only when all the growth process takes place at room temperature. Under these conditions a very good epitaxial growth of Pd is achieved, despite the large misfit (about 8.6%) between Pd and the substrate and the existence of a semi-amorphous layer between the thin film and the substrate. A large number of twins appear in these films.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Magnetism in very thin films of permalloy measured by spin polarized cascade electrons

The spin polarizationP of the low energy cascade electrons excited with a primary unpolarized electron beam is measured with ultrathin films of permalloy (Ni₈₀Fe₂₀) as a function of film thickness, external magnetic field, and temperatureT. Surface adsorbates of small concentrations of less than 10% of a monolayer can change the Curie point and the saturation value ofP ₀(T0) by as much as 30%. The Ta-substrate induces a magnetically dead region in permalloy. Conventional spin wave theory cannot account for the observed smallT-dependence of the magnetizationM. Films on a nonmagnetic substrate are compared to similar films coupled to bulk permalloy over an interface of Ta. TheT-dependence ofM with the coupled films can be explained by spin wave theory. At lowT, the films coupled to the bulk exhibit a faster decrease ofM than the uncoupled films. We propose that this thermal stabilization of the magnetization in very thin ferromagnetic films is due to quenching of the long wavelength spin modes.     

Ferromagnetic order and critical behavior at surfaces of ultrathin epitaxial films

The critical behavior, ferromagnetic order and magnetic anisotropies of ultrathin, epitaxial, magnetic films is studied using electron capture spectroscopy (ECS), which is capable of probing the long-ranged and short-ranged electron spin polarization (ESP) at the topmost surface layer of uncoated and coated magnetic structures. For all systems [Ni(100)/Cu(100), Ni(100)/NaCl(100), fcc Fe(111)/Cu(111), Fe(100)/Ag(100), Tb/Fe(100)/Ag(100), Fe(100)/Au(100), hcp Tb(0001)/W(110), Fe(110)/W(110), V(100)/Ag(100), Pd(100)/Ag(100), Pd/W(110)] investigated so far, ferromagnetic order is detected. It is found that the surface Curie temperatureT _Cs depends on film thicknessd. ECS data obtained at the surface of various systems reveal the existence ofT- andd-dependent magnetic anisotropies. Although for V(100)/Ag(100) the measured critical exponent=0.128 agrees very well with=1/8 predicted for the two-dimensional Ising model, for other systems, such as Fe(100)/Au(100), the measured value (0.25) is in disagreement with theoretical predictions. The experimental results are discussed within the framework of presently available experimental and theoretical data.