中外优秀男子百米跑运动员速度结构和技术特征比较分析

针对近年来我国短跑项目的低弥状态，通过中外优秀男子100米跑运动员的速度结构和技术特征进行分析认为：最大速度是制约我国男子100米跑的关键因素，而加速距离短是影响最大速度的主要因子．且我国男子短跑运动员保持最大速度的能力差及最大速度出现的时机不合理。     

在Triton X—100存在下,用2-(5-溴-2-吡啶偶氮)-5-二乙胺基苯酚(5-Br-PADAP)分光光度测定方钍石中的钍

方钍石是钍来源的重要含钍矿物。目前测定钍的含量的方法较多,虽有用5-Br-PADAP测定钍的方法的报导,但未见有在triton X-100存在下,用5-Br-PADAP直接测定方钍石中钍的含量的报导。Triton X-100的存在,使测定的酸度增加,从而增加干扰元素的干扰比;并且增加了络合物的稳定时间。本文采用5-Br-PADAP作显色剂,在氯乙酸-氯乙酸钠缓冲体系中用triton X-100表面活性剂胶束增溶分光光度测定方钍石(人工样品)中钍的含量,获得较满意的结果。在25毫升中,钍的比耳定律范围在0～20微克,摩尔吸光系数为5.2×10~4升·摩尔~(-1)·厘米~(-1),Sandell灵敏度为0.0045微克钍(IV)/厘米~2。我们对两种含量的方钍石人工样品进行了测试,结果良好,回收率在97.3～101.4％之间,此方法可靠,精密度较高,误差符合微量组分的测定要求,我们对样品测定结果表示满意。     

Polarization inscription in ferroelectric (111) PZT and (100) SBT films

Ferroelectric thin films form an equilibrium domain structure compatible with their respective crystallographic symmetry. In tetragonal (111) PZT, 90° domains prevail; in (pseudo-tetragonal) (100) SBT both 90° and 180° domains are present. The size of 90° domains has been measured for e.g., PZT as slabs of 15 nm width. Domain size is a result of stress minimization in the film during the paraelectric (PE) → ferroelectric (FE) transition. A precise and regular domain pattern for (111) PZT and (100) SBT films has been investigated in detail by TMSFM. Single domains can be addressed mechanically with the tip of an AFM. Such single domain switching corresponds to a data storage density of 200 Gbit/inch². Applications of ferroelectric and high- paraelectric materials for e.g., non-volatile data storage replacing DRAM devices or as sensors in infrared cameras are increasingly becoming popular.     

超高灵敏显色反应测定痕量锑──锑（Ⅲ）─罗丹明B─碘化钾体系

本文研究结果表明，水溶性大分子化合物阿拉伯胶和非离子表面活性剂ＴｒｉｔｏｎＸ－１００共同存在下，锑碘配阴离子和罗丹明Ｂ的显色反应具有很高的灵敏度。缔合物的最大吸收在５ｇ０ｎｍ，摩尔吸光系数ε＝６．１×１０￣５Ｌ·ｍｏｌ－１·ｃｍ－１。用巯基棉富集锑，分离干扰离子。本法可应用于有色金属中痕量锑的测定。     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

Influences of Triton X-100 on Hemoglobin Behaviors in Hemoglobin/Acyclovir/Triton X-100/H2O System

The influences of Triton X-100 on hemoglobin （Hb） behaviors were studied by the methods of UV-Vis spectrum, fluorescence spectrum, HPLC, conductivity, zeta potential and negative-staining transmission electron microscope in Hb/acyclovir/Triton X-100/H2O system. With the increase of Triton X-100 concentration in the system, the percentage of the free acyclovir increased from 58%--63% to 90%--94%. The static quenching constant and the association number of acyclovir to Hb decreased. The fluorescence spectrum, conductivity, zeta potential, fluorescence polarization and negative-staining morphology of Hb tended to recover to those of the original state of Hb in the same concentration of Hb. The interaction between Triton X-100 and Hb is stronger than that between acyclovir and Hb. Most Triton-X-100 was associated with Hb at low Triton X-100 concentration. But the interaction of Triton X-100 with Hb was apparently dominant in high Triton X-100 concentration. The Hb structure was unfolded and finally denatured.     

Hydrolysis of cephanone in the micelles with different charges

The hydrolysis of cephanone in water and micelles with different charges was studied by UV-vis absorption spectroscopy. The change of pH with the hydrolysis of cephanone was determined. The mechanism of the hydrolysis and the effect of the acidity of the media on the hydrolysis were studied. The results show that the hydrolysis rate of cephanone increases with the acidity. Compared with water, SDS micelles accelerate this hydrolysis, whereas CTAB and Triton X-100 micelles suppress it. The effects of the micelles with different charges on the hydrolysis are explained by the proton concentration of the micro-environment where cephanone exists and by the charge density of the polar group of the cephanone molecules.     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…