A comparison of different approaches to integrate flamelet tables with presumed-shape PDF in flamelet models for turbulent flames

Flamelet models for turbulent combustion modelling make use of presumed-shape probability density functions (PDFs) for integrating laminar flamelet solutions to obtain an integrated flamelet table that can readily be used for turbulent flame calculations. The existence of non-unique approaches for such an integration has rarely been investigated before. For the first time, this work studies systematically the non-uniqueness of the flamelet table integration approaches. A flamelet model called the flamelet/progress variable model is used in the study, although the issue exists generally in many other flamelet models. Two classes of table integration approaches are investigated, one preserving the laminar flamelet structures during integration and the other not. Three different table integration approaches are examined and compared in detail to provide a thorough understanding of the different approaches. A partially stirred reactor is used as a test case for examining the different approaches. A method based on the transported PDF method is also employed to provide a reference for the assessment of the different flamelet table integration approaches. It is found in general that the flamelet preserving integration approach yields a more reasonable joint PDF of the mixture fraction and the progress variable, and the prediction results are closer to the referenced transported PDF results.     

鲁棒PDF控制策略在永磁同步电机系统中的设计及仿真

对电机控制系统的经典反馈设计方案是建立在简化的受控对象模型基础之上,而实际模型参数的变化会引起控制系统性能的改变。本文针对实际应用的永磁同步电机,为了保证电机控制系统的强鲁棒性,通过对其系统灵敏度的理论推导,给出了一种新的控制器参数设计方法。该设计方法以系统灵敏度为评价指标来度量系统的鲁棒性,结合应用于二阶控制对象的伪微分反馈控制器结构,来削弱控制对象参数值的改变对控制系统性能的影响。并建立了精确的永磁同步电机仿真模型,将该方法应用于其速度控制。仿真结果表明在该控制方案下,在永磁同步电机的转动惯量和定子电阻值变化时具有较小超调量变化(小于4%)的响应特性。同时与普通PID控制对比分析,验证了用该方案设计的PMSM调速系统具有较高的抗参数变化的鲁棒性。     

Statistical structure of the velocity field in cavitating flow around a 2D hydrofoil

Transformation of flow turbulence structure with cavitation occurrence, determination of the flow conditions favorable for nucleation of cavitation bubbles, influence of the statistical structure of turbulence on this process and the inverse effect of cavitation on the flow dynamics are challenging problems in modern fluid mechanics. The paper reports on the results of statistical processing of the velocity fields measured by a PIV technique in cavitating flow over a 2D symmetric hydrofoil for four flow conditions, starting from a cavitation-free regime and finishing by unsteady cloud cavitation. We analyze basic information on the statistical structure of velocity fluctuations in the form of histograms and Q-Q diagrams along with profiles of the mean velocity and turbulent kinetic energy. The research reveals that the flow turbulence pattern and distributions of turbulent fluctuations change significantly with the cavitation development. Under unsteady cloud cavitation conditions, the probability density function of the fluctuating velocity has a two-mode distribution, which indicates switching of two alternating flow conditions in a region above the hydrofoil aft part due to periodic passing of cavitation clouds. Behaviors of the mean and most probable velocities unexpectedly appear to be different with a monotonous increase of the incoming flow velocity. This finding must be caused by modification of the skewness coefficient of the fluctuating velocity.     

湿法脱硫岛内气液两相流流动规律的研究

采用直接观察法、床层膨胀法和概率密度函数(PDF)法对湿法烟气脱硫塔内流型的形成和转变规律进行了研究和分析,认为湿法烟气脱硫塔内气液两相顺、逆流时,随着液气比的增大,会形成液柱式、喘动式和类鼓泡式流动等三种流型,并给出了判别三种流型的基本方法和准则,提出了气相雷诺数Reg-液气比L／g流型图,为湿法烟气脱硫塔传热传质规律的进一步研究及塔身的安全运行提供了基础依据。     

湍流燃烧的简化的联合PDF模拟

为同时满足工程应用中的合理性和经济性 ,提出了一种简化的联合三维高斯分布的 PDF模型 ,将其用于后台阶突扩燃烧室中甲烷燃烧的数值模拟。由于充分考虑了组分浓度、温度的一阶矩以及它们的二阶自关联矩和互关联矩对化学反应速率的影响 ,得到的火焰形状和温度分布无论是定性还是定量上都比 EBU模型和 Arrhenius模型合理。因计算量较小 ,模型在工程实际中 ,特别是污染物生成的数值模拟中得到应用     

谈数学论文排版技术与全文上网的实现

探讨了数学文章编辑排版中的技术问题，对于图文混排，图像格式转化及全文上网的实现提供了切实可行的方法。     

GCC box in<Emphasis Type="Italic">Arabidopsis PDF1.2</Emphasis> promoter is an essential and sufficient cis-acting element in response to MeJA treatment

The expression of Arabidopsis PDF1.2 gene isregulated by jasmonic acid (JA) and ethylene (ET). It also has been well documented that GCC box is an element responsive to ET, however, the responsive mechanism of JA in such plant defense gene expression is unclear. In this paper, the authors define the essential cis-acting element in PDF1.2 promoter responsive to methyl jasmonate (MeJA) through fragment deletions and site-directed mutageneses combiningAgrobacterium-mediated transient reporter gene expression in tobacco leaves. Firstly, the MeJA inducible expression o fPDF1.2 was confirmed by using the upstream -1.86 kb fragment of PDFI.2 gene. Secondly, the upstream -300— -243 bp fragment of the promoter was evidenced to respond to MeJA. To further characterize this promoter region, three point mutations were introduced into the -300— -243 bp fragment of the promoter. This result showed that the mutation of GCC box abolished MeJA induction, whereas the mutations of the G box-like and the imperfect palindrome sequence did not significantly decrease MeJA inducible effect, indicating that GCC box in PDFI.2 is essential for MeJA induction. The sufficient responsiveness to MeJA of this GCC box was further investigated by 4xGCC fused upstream to the CaMV 35S minimal promoter. This result suggested that the fused promoter was able to activate reporter gene expression in response to MeJA. Thus these results indicate that the GCC box in PDFI.2 is an essential and sufficient element to confer MeJA induction.     

Flow Structure of Lifted Swirling Jet Flames

Swirling combustion is widely applied in various applications such as gas turbines, utility boilersor waste incinerators. This article contributes to the ongoing research by providing experimentaldata that are gathered in the mixing zone of a lifted swirling premixed natural gas flame. Theobjective of this paper is fivefold: (1) to introduce the lifted swirling flame featuring lowNO _x emissions (2) to provide experimental data such as major species distributions, temperature and streamlines of the flow pattern, (3) to report on velocity bias in probability density function (PDF) distributions and to present PDF sequences of velocities in medium scale swirling flows, (4) to make an assessment on the local small-scale turbulence that is present in the swirling mixinglayer and (5) to provide new experimental data for model verification and development.The PDFs are corrected in order to compensate for the velocity bias phenomenon, which is typicalfor randomly sampled LDA data. Sequences of axial PDF data are presented and measurement locationsof interest are selected to look at the PDF characteristics of the internal and externalrecirculation zones, the mixing layer and the onset of the reacting flow into detail. The mixinglayer PDFs covered a wide velocity range and revealed bimodality; even the concept ofmulti-modality is suggested and explored. Analysis showed that a sum of two Gaussian distributionscan accurately envelop the experimental PDFs. The reason for this broadband turbulence behavior isto be found in combination of precessing and flapping motion of the flow structures, and also incombustion generated instabilities of the lifted flame. As a result, the flame brush is wide (largescale motion) and the mixing (small-scale turbulence) flattens any high temperatures in thecombustion process.The multi-scale turbulence concept is subsequently used to make anassessment of the local turbulence characteristics in the mixing layer.The idea is that the PDFs capture both contributions of the flow-inherent fine grain turbulence (u _l ) which is superposed on slowlarge scale fluctuating structures. It is this u _l that will be of interest in continued research on the classification of the lifted flame into acombustion regime diagram (e.g. Borghi diagram). Finally, the bimodalitycharacter in reacting flows and the prediction of large-scale structuresmay be a challenge for LES researchers.     

钝体后湍流预混燃烧的PDF模拟

本文采用PDF方法对矩形燃烧室内钝体后的湍流预混火焰进行了数值模拟。脉动速度-频率-标量联合的PDF输运方程用Monte Carlo方法求解,质量、动量和能量的平均值由基于无结构网格的有限体积法求解,压力通过状态方程获得。PDF方程中所需的平均密度、平均速度和压力由有限体积法提供,并将用Monte Carlo方法求出的雷诺应力、化学反应源项和比热比传递给有限体积法。本文对丙烷和空气燃烧的不同简化化学反应机理进行了研究,并与实验结果进行比较,获得满意的结果。     

IMS中的QoS控制机制研究

3GPP在UMTSR5版本中引入了IMS(IP Multimedia Subsystem,IP多媒体子系统),向用户提供数据、语音、图像、视频等移动多媒体业务。IMS采取有效的QoS控制机制保证移动多媒体业务的服务质量。本文从QoS的概念出发,描述了UMTS网的业务分类与QoS等级,分析了IMS中基于策略的QoS架构,研究了IMS中基于策略的QoS控制机制。