CMW1型外铲磨机PC控制及应用

研究铲磨机各种运动和控制要求，设计出继电控制与ＰＣ控制相结合的电气控制系统。此系统在电路设计、电气柜安装、调试维修和操作等方面满足了设计要求。铲磨加工过程的ＰＣ控制解决了转轮流道三维表面成形运动的控制难题。ＰＣ控制程序基本满足了铲磨工艺要求。     

Moisture barrier of AlxOy coating on poly(ethylene terephthalate), poly(ethylene naphthalate) and poly(carbonate) substrates

The moisture barrier property of Al_xO_y coated poly(ethylene terephthalate) (PET), poly(ethylene naphthalate) (PEN) and poly(carbonate) (PC), have been investigated. The differences in the morphology of the Al_xO_y sputtered grown on these substrate were investigated using atomic force microscopy (AFM). The initial growth of the Al_xO_y followed closely the topology of the substrate and an amplified roughness was observed. In the fully grown Al_xO_y, the comparative roughness followed that of the substrates. It has been found that a single layer Al_xO_y improved the moisture barrier of PET by an order of magnitude, PC by two orders of magnitude while no improvement was observed for PEN. UV-ozone treatment on PC further improved the moisture barrier, while no improvement was observed for PET and PEN. The comparative effects of the substrate surface roughness and surface energy on the moisture barrier are discussed.     

PC微机上实现红外光谱谱图的匹配检索

本文介绍了所开发IRSMS系统的基本情况,并且使红外光谱的匹配检索这一复杂问题在PC微机上得以初步实现。     

谷氨酸诱导的PC12细胞损伤的研究

采用MTT方法观察一定浓度的谷氨酸对PC12细胞活性的影响，结合凝胶电泳和荧光显微镜观察细胞有无DNA断裂和凋亡形态学改变。结果发现谷氨酸确有兴奋毒作用，细胞死亡机制主要为凋亡。     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

NMR频率综合器的微机控制

为实现ＰＴＳ系列频率综合器的微机控制，设计了一种简单的控制电路。在微机的控制下，通过该电路与微机的并行通讯口，用Ｃ语言编写的控制程序可以很方便的控制频率综合器的输出频率。控制程序采用菜单操作，电路所需的＋５Ｖ电源由微机提供，整个控制系统简单实用，值得推广。     

PC／PBT共混体系的研究：Ⅰ.PC,PBT熔融共混时的酯交换反应

采用红外光谱、核磁共振等测试手段，系统地研究了ＰＣ、ＰＢＴ熔融共混时的酯交换反应，发现ＰＢＴ中残余的Ｔｉ催化剂会对酯交换反应起催化作用。通过加入能和Ｔｉ催化剂络合添加剂，可以控制酯交换程度，这为控制ＰＣ／ＰＢＴ合金的性能提供了一个非常有效的方法。