Long-term trend in CHF2Cl (HCFC-22) from high spectral resolution infrared solar absorption measurements and comparison with in situ measurements

The average tropospheric volume mixing ratio of CHF₂Cl (HCFC-22) has been retrieved from a time series of high spectral resolution ground-based infrared solar absorption spectra recorded with the McMath Fourier transform spectrometer located at the U.S. National Solar Observatory facility on Kitt Peak in southern Arizona (31.9°N, 111.6°W, 2.09 km altitude) for the time period October 1987–November 2002. The retrievals are based on fits to the well-isolated, unresolved 2ν₆ Q branch at 829.05 cm⁻¹ and the SFIT2 retrieval algorithm. The measured daily averages show a near linear rise per year in the mean tropospheric volume mixing ratio as a function of time with a best fit yielding an average increase rate of (5.66±0.15) parts per trillion (10⁻¹²) by volume per year, corresponding to (6.47±0.17)%yr⁻¹, 1 sigma, at the beginning of the time series. The tropospheric mixing ratios retrieved from the solar spectra have been compared with monthly average surface flask sampling measurements from the Climate Monitoring and Diagnostic Laboratory (CMDL) station at Niwot Ridge, Colorado (40.0°N, 105.5°W, 3013 m altitude), archived measurement from the same location, and early CMDL northern hemisphere Pacific cruise measurements. The average ratio of the retrieved tropospheric mixing ratio relative to the CMDL surface mixing ratio is 1.053 for the overlapping 1987 to 2002 time period. The retrieved mean tropospheric mixing ratio is consistent with the surface measurements within the errors estimated for the remote sensing observations.     

On the theoretical determination of the electron affinity of ozone

Summary Multiconfigurational electron correlation methods have been analyzed in order to theoretically compute the electron affinity (EA) of ozone. The near-degeneracy correlation effects, which are so important in O₃ and O ₃ ^– , have been described using complete active space (CAS) SCF wave functions. Remaining dynamic correlation effects are computed using second-order perturbation theory (the CASPT2 method). The best calculated adiabatic value (including zero-point energy corrections), 2.19 eV, is about 0.09 eV larger than the experimental value. Comparative studies using size-consistent coupled pair functional approaches (CPF and ACPF) have also been performed. The harmonic frequencies in O ₃ ^– have been determined to be: ₁=992, ₂=572, and ₃=879 cm^–1, which gives a zero-point energy of 0.151 eV.     

Structure elucidation of cyclohexene (9Z)-octadec-9-enyl ethers isolated from the leaves of Uvaria cherrevensis (Annonaceae)

The phytochemical investigation of the leaf extract of Uvaria cherrevensis (Annonaceae) yielded three new cyclohexene (9Z)-octadec-9-enyl ethers, cherrevenols M-O (1–3), and a known fatty ester derivative (4). The structures of the isolated compounds were elucidated by spectroscopic and computer-aided molecular modelling methods. Ozone Induced Dissociation (OzID) mass spectrometry was employed to determine the C-9 position of the side chain olefinic double bonds, while ¹³C NMR spectroscopy indicated their (Z)-configurations. All isolated compounds were evaluated for their antimalarial and cytotoxic activities; all were inactive.     

Catalytic activity of silica in ozone formation in electrical discharges

The catalytic action of granular silica packing on ozone formation has been observed under discharge conditions. Using a glass ozonizer with a metal high-voltage electrode, at a frequency of 400 Hz it was possible to obtain much higher ozone concentrations in the presence q( silica than without packing, with the same total energy consumption. The dependence between ozone production and energy efficiency is considered, and conditions of the optimum ozonizer run are discussed. It is shown that in the all-glass ozonizer with a narrow discharge gap, the ozone concentration may be as high as 6.5% (ca. 130g O₃/m³) when silica packing is applied.     

O3 and SO2 sensing concept on extended surface of B12N12 nanocages modified by Nickel decoration: A comprehensive DFT study

Adsorption of SO₂ and O₃ molecules on pristine boron nitride (B₁₂N₁₂) and Ni-decorated B₁₂N₁₂ nano-cages has been systemically investigated through density functional theory (DFT) methods. Adsorption energies (thermodynamics), bond distances, charge analysis, dipole moments, orbital analysis and density of states are calculated by van der Waals DFT method (MPW1PW91) functional. The adsorption energies of O₃ and SO₂ on pristine B₁₂N₁₂ are about −143.8 and −14.0 kJ mol⁻¹, respectively. The interaction energies of O₃ and SO₂ with pristine B₁₂N₁₂ are indicative of chemisorption and physisorption, respectively. Ni-decorated B₁₂N₁₂ (Ni@BN) enhances adsorption of both O₃ and SO₂ species. The interaction energies for adsorption of SO₂ are about −166 and −277 kJ mol⁻¹ whereas the corresponding energies for O₃ are −362 and −396 kJ mol⁻¹ for configuration A and B, respectively. These observations show that functionalized B₁₂N₁₂ are highly sensitive toward SO₂ and O₃ molecules.     

Ozone etching of a highly asymmetric triblock copolymer with a majority polydiene component

The ozone etching of thin films of a commercial polystyrene-polyisoprene-polystyrene (PS-PI-PS) triblock copolymer (Vector 4111) was studied using atomic force microscopy (AFM) and ellipsometry. The major phase of the copolymer consists of PI (82 wt.%) and the copolymer forms a cylindrical structure upon annealing. Moderate ozone doses (1.4% wt/wt) were used to etch the copolymer. This revealed two stages of the ozonation: rapid etching of the PI fragments followed by slow compacting of the remaining PS cylinders. Under certain conditions ozone treatment results in the formation of nanosized grooves in a PS matrix which is suitable for lithographic processes.     

Effects of ozone in surface modification and thermal stability of SEBS block copolymers

SEBS block copolymers were treated under mild conditions in an ozone atmosphere, producing very slightly chemically-modified surfaces. The thermal stability was analysed by chemiluminescence and related to morphological changes observed by AFM. The intrinsic thermal stability was diminished by ozone exposure, but the oxidation induction times were delayed which indicates an enhancement of thermal stability under oxidative conditions. Also, chemiluminescence analysis showed the presence of a typical order-disorder transition at temperatures around 120 °C. Two different sets of samples which showed different morphological patterns were imaged by AFM. The effects of micro-domain separation and inter-domain structure on thermal properties are discussed and explained by a coarsening of the internal interface induced by ozone. A detailed 2D Fourier transformed analysis of AFM images allowed us to identify a regular wrinkled nano-pattern induced by uniaxial strain combined with ozone treatment, offering new opportunities in applications ranging from organic electronics to bio-patterning.     

MnO2/ZSM-5上臭氧协同催化去除甲醛的性能研究

采用浸渍法制备了不同MnO2负载量的催化剂,用BET分析、X射线衍射等手段对其进行了分析,并考察了在MnO2/ZSM-5催化剂上臭氧协同催化去除甲醛的性能.结果显示:相对于单一的MnO2和ZSM-5,MnO2/ZSM-5复合催化剂具有更高的催化活性,其中10%MnO2/ZSM-5性能最佳,一次性去除效率可达到47%左右,制备所得到的催化剂有较强的稳定性,连续工作120h去除效率基本不变.     

Improving thermal and ozone stability of skim natural rubber by diimide reduction

The physical, chemical and thermal properties of diene-based polymers are improved by a chemical modification method such as hydrogenation. Skim natural rubber (SNR) which is mainly comprised of cis-1,4-polyisoprene was hydrogenated by diimide reduction in latex form, using hydrazine and hydrogen peroxide with copper sulfate as catalyst. The effect of various parameters on the level of hydrogenation calculated from proton nuclear magnetic resonance spectroscopy (¹H NMR) was investigated. The kinetic results indicated that the diimide hydrogenation of skim natural rubber latex (SNRL) exhibited a first order behavior with respect to the CC concentration. The apparent activation energy of the catalytic and non-catalytic hydrogenation of SNRL was calculated as 9.5 and 21.1 kJ/mol, respectively. From the TEM micrograph of hydrogenated SNRL particles, non-hydrogenated rubber core and hydrogenated rubber layer were observed according to a layer model. The results from thermal analysis confirmed that thermal stability of hydrogenated SNR was improved compared with the starting SNR. In addition, the thermal aging and ozone resistance of vulcanized hydrogenated SNR blends were also investigated.