塑料半薄切片法观察豆科植物根表面传递细胞

豆科植物合欢、紫云英、苜蓿等在接种根瘤菌后，部分根毛密集生长稍有膨大的根段，经FAA固定，GMA包埋，半薄切片（3um),PAS反应染色，在光学显微镜油镜下观察根的横切面发现，其表皮细胞或外皮层细胞的外切向壁上有明显的壁内突结构，属典型的根表面传递细胞，采用半薄切片，不仅操作简单，费用较少，且较易确定传递细胞发生的部位。     

油画教学的多元化取向

油画作为我国当代文化领域内最具生命力的新兴学科之一，在各美术院校均有设置，如何调整我校油画教学的单一化倾向，笔者从三个角度进行分析。提出油画教学应取向多元化。     

A NOVEL EOR POLYMER (Ⅱ)——INVESTIGATION ON IN-SITU GELATION OF SMRF SYSTEM IN BEREA CORE

In-situ gelation of aqueous sulfomethylated resorcinol formaldehyde (SMRF) system inBerea core has been investigated. Two sets of displacement experiments were conducted with thissystem (containing 5% NaCl, 0. 036% CaCl_2. 2H_2O). The brine permeabilities of the coreswere reduced significantly from about 600 to 0.1 md. The in-situ gelation in Berea core occurreda little bit earlier than gelation anticipated from bulk test in the experiments. The gel time waseasier to control at initial pH between 6 and 8. During injection of SMRF system, the apparentviscosity was less than 1 mPa·s at 41℃.     

Kinetics of oil saponification by lead salts in ancient preparations of pharmaceutical lead plasters and painting lead mediums

Lead soaps can be found in archaeological cosmetics as well as in oil paintings, as product of interactions of lead salts with oil. In this context, a better understanding of the formation of lead soaps allows a follow-up of the historical evolution of preparation recipes and provides new insights into conservation conditions. First, ancient recipes of both pharmaceutical lead plasters and painting lead mediums, mixtures of oil and lead salts, were reconstructed. The ester saponification by lead salts is determined by the preparation parameters which were quantified by FT-IR spectrometry. In particular, ATR/FT-IR spectrometer was calibrated by the standard addition method to quantitatively follow the kinetics of this reaction. The influence of different parameters such as temperature, presence of water and choice of lead salts was assessed: the saponification is clearly accelerated by water and heating. This analysis provides chemical explanations to the historical evolution of cosmetic and painting preparation recipes.     

油溶性偶氮染料的合成及其性能研究

随着染料在现代科技中的广泛应用,染料的油溶性也日益受到人们的重视.如:非线性光学材料、激光盘光学信息存贮材料中使用的染料、彩色成像中的油溶性影像染料等,对染料在有机溶剂中的溶解度都有很高的要求.偶氮染料是有机染料中的主要类型,但目前对其分子结构与油溶性关系的研究甚少.本文合成了一类黄色偶氮染料(见表1),并对其色光、油溶性等性能进行了测试,发现取代基相对于偶氮基的位置,是影响偶氮染料油溶性的主要因素.     

Semi-micro solvent extraction as a rapid and efficient preconcentration technique for the determination of n-alkanes in oil-contaiminated water and soil samples by capillary gas chromatography

Summary In this study, a rapid and efficient semi-micro extraction procedure is presented for the extraction of some higher n-alkanes from water and soil samples. In the case of water samples n-hexane was used as the organic phase in a phase volume ratio (volume of aqueous phase/volume of organic phase) higher than 285, while in the case of soil samples, extraction with n-hexane was carried out in the presence of an excess of 2 M NaCl solution. The extraction rate from soil samples is very high and is better than Soxhlet extraction, comparable with supercritical fluid extraction. High preconcentration factor in water samples allows the limits of detection to be in the ng.mL⁻¹ level with the use of gas chromatographic analysis. Flame ionization detector was used for monitoring the analytes. The obtained recoveries of all studied compounds from both water and soil samples are higher than 90%. This method was successfully used to determine some n-alkanes in municipal wastewater and contaminated soil.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

基于三阶段SBM模型的中国节能服务上市企业效率研究

节能服务企业效率对于推动节能服务产业发展和确保国家“双碳”目标实现具有重要意义。运用三阶段SBM模型,对2020年60家中国节能服务上市企业的综合效率进行实证研究,并分析效率的影响因素。研究结果表明,经济发展水平对综合效率具有双重影响,合适的产业结构和较高的投入资本回报率有利于综合效率提升,而政府补贴与企业存续时间制约了综合效率改进;剔除环境因素与随机误差影响后,多数企业综合效率下降,整体效率偏低;提高规模效率是提升综合效率的关键,且绝大部分企业处于规模收益递增状态。研究最后提出创新补贴方式、建立企业认证制度、开展综合能源服务和推动企业间兼并重组等可行建议,以提升节能服务企业的综合效率。     

X—射线荧光光谱法分析燃油锅炉受热面的灰渣成分

用X-射线荧光光谱(XRF)法测定了火电厂燃油锅炉受热面的灰渣成分,给出了XRF测试条件,与等离子体发射光谱法的测试结果进行了对比。     

眼镜蛇蛇油中甘油三酸酯的成分研究

用ＡｇＮＯ３－硅胶薄层板，氯仿＋丙酮（２０＋１）为展开剂，将蛇油中甘油三酸酯分离为５个组分，并用同样的色谱固定相和石油醚－氯仿－丙酮溶剂系统进行制备性分离。用质谱法对甘油三酸酯进行分子一级水平的化学研究，确定了眼镜蛇蛇油中５个主要的甘油三酸酯成分的结构形式为：１６∶０－１８∶０－１８∶０，１６∶０－１８∶０－１８∶１，１６∶０－１８∶２－１８∶１，１８∶２－１８∶２－１８∶０，１８∶２－１８∶２－１８∶１。