Quantum states in fabricating poly-Si films

The quantum states are presented in these processions of fabricating poly-Si films. Amorphous silicon films prepared by PECVD has been crystallized by conventional furnace annealing (FA) and rapid thermal annealing (RTA), respectively. It is found that the thin films grain size present quantum states with the increasing of the gas flow ratios of SiH₄, H₂ mixture, substrate temperatures, frequency power, annealing temperature and time.     

电加热炉模糊变结构温度控制系统

本文针对炉体温度对象建模较难，常规算法难以发挥良好的作用，阐述了将模糊控制与变结构控制结合控制的原理及方法，并成功的将该设计方法应用于成都砂轮厂树脂硬化炉的温度控制中，取得良好效果。     

氧帘快速割嘴在连铸板坯切割的应用

将氧帘快速切割的原理应用于连铸板坯切割生产中，着重研究连铸板坯快速切割割嘴的工艺过程及结构特点。该割嘴在实际生产应用中表明具有切割成本低、工效高、寿命长、使用方便、性能可靠、割缝较窄、切割断面质量好等优点，具有 很高的推广价值。     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

强化传热生物质燃料热风炉研究

研制出用于粮食及其它农副产品干燥的新型热风炉。此炉型采用生物质燃料洁净燃烧技术及高强化传热技术,具有低污染、高效率、长寿命等优点。     

石墨炉原子吸收法测定化妆品中的砷

在过氧化氢溶液及硝酸镍存在下，用石墨炉原子吸收法测定化妆品中砷的含量，砷的浓度在0-1mg/L时与吸光度线相关，线性方程为A=0.838c 0.003，相关系数为0.99994。对液体和固体化妆品中的砷进行测定，砷的加标回收率为98.3%-98.7%，测定结果的相对标准偏差为0.65%-1.50%。     

Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.     

感应加热钢包炉电磁与结构优化

感应加热钢包炉是国外新发展的一种二次精炼及加热设备，具有高效、低能耗、无污染的特点，本文在感应加热钢包炉电磁与结构分析工作的基础上，用电磁场数值模拟方法对感应加热钢包炉的电磁设计和包壳结构进行优化。     

单电极直流电弧炉电热特性理论研究

运用电磁理论与流体静压力原理,导出了电弧自身的电磁向心压缩力以及电弧对熔池冲力的解析式。又运用辐射传热原理,导出了单电极电弧对熔池与炉衬辐射传热的解析式。解析式揭示出电弧自身电磁向心压缩力、电弧对熔池冲力,单电极电弧对熔池以及对炉衬辐射传热的规律。     

平台石墨炉原子吸收测磷的方法研究

研究了平台石墨炉原子吸收测定磷的方法,表明以氯化钯和硝酸钙的混合液作为基体改进剂测定生物样品中的磷效果最好,方法特征量为8×10~(-9)g,工作曲线线性范围为0～0.400吸光度,精密度好,抗干扰能力强,方法简单,利用标准曲线即可测定生物样品中磷。