Volcanic monitoring for radon and chemical species in the soil and in spring water samples

Soil radon has been monitored at two fixed stations in the northern flank of Popocatepetl Volcano, a high risk volcano located 60 km SE from Mexico City. Water samples from three springs were also studied for radon as well as major and trace elements. Radon in the soil was recorded using track detectors. Radon in the water samples was evaluated using the liquid scintillation method and an Alphaguard. The major elements were determined through conventional chemical methods and trace elements using an ICP-MS equipment. Soil radon levels were low, indicating a moderate diffuse degassing through the flanks of the volcano. Groundwater radon had almost no relation with the eruptive stages. Water chemistry was stable in the reported time (2000–2002).     

Rook theory and cycle-counting permutation statistics

A statistic is found to combinatorially generate the cycle-counting q-hit numbers, defined algebraically by Haglund [Adv. in Appl. Math. 17 (1996) 408–459]. We then define the notion of a cycle-Mahonian pair of statistics (generalizing that of a Mahonian statistic), and show that our newly discovered statistic is part of such a pair. Finally, we note a second example of a cycle-Mahonian pair of statistics which leads us to define the stronger property of being a cycle-Euler–Mahonian pair.     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Analysis of nickel-niobium alloys by inductively coupled plasma optical emission spectrometry

Inductively coupled plasma optical emission spectrometry (ICP-OES) was applied to the analysis of major and minor elements of Ni-Nb alloys obtained by aluminothermic reduction process. Digestion of samples was made using a mixture of HF+HNO₃. Minor and trace elements were determined without matrix separation. The precision for all constituents was <3%. Recoveries for the analyte-spiked samples were 95%.     

Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7 ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0 M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17 kHz, sonication temperature at 65 °C, an acid volume of 2 ml, an hydrochloric acid concentration of 6.0 M and a sonication time of 10 min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.     

Major and Trace Elements in Spruce Needles from Urban Areas: Some Aspects of Analysis in Environmental Studies

Main and trace elements in samples of spruce needles from urban areas in Poland and Norway were analysed using the ICP-AES method. Concentrations of Al, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, P, Sr, Ti, V and Zn were measured in needles from conifer trees growing in different locations. Two different procedures of laboratory sample preparation were compared and discussed. Different washing procedures were examined and compared. For quality control of analytical measurements, Standard Reference Material BCR CRM 101 (spruce needles from Europe) was used. Synergistic and antagonistic relationships between elements in spruce needles were investigated. Applicability of spruce needles in biomonitoring of environmental metal pollution was discussed.     

新工科项目“地方(行业)高校化学类专业应对产业变化的升级改造研究与实践”的实施

This "emerging engineering education (3E)" project "Upgrade and Practice of Chemistry-related Majors of Local and/or Specialized University Responding to the Industry Changes" was supported by the Ministry of Education. To aim at the issue of how to upgrade the chemistry-related majors of a local and/or specialized university responding to industry changes, an investigation on local regional economy and industry changes was carried out, the capability requirements of 3E for talents were analyzed, and the training objectives, graduation requirements as well as the new teaching models were also studied for the major to meet the future requirements. The practical experience for 3E construction of chemistry-related majors by selected universities was suggested.     

X射线荧光光谱法分析玻璃纤维中主、次量元素成分

采用粉末压片-波长色散X射线荧光光谱法分析了中碱及无碱玻璃纤维中硅、铝、钙、镁、铁、钛、钾、钠、砷、氟等10种主、次量元素成分含量。以6个标准样品并结合两个参考样品建立校准曲线,采用DeJongh模式方程有效校正玻璃基体中元素间的吸收增强效应和重叠效应。该方法测定10个元素的精密度和准确度均较好,其相对标准偏差在0．35％～2．86％之间,对实际样品的分析结果与化学法相吻合,可应用于玻璃纤维中多元素成分的快速分析。     

论大型主题公园的演化和后续再利用——以昆明世博园为例

以大型主题公园——昆明世博园为例,分析了其目前生存状态以及影响发展的因素,经过问卷调查、现场走访等方法提出一系列适宜昆明世博园后续发展的策略。这可为稍晚建成的沈阳、上海世博园后续发展提供借鉴和指导性意见。     

Simultaneous analysis of multiple PCR amplicons enhances capillary SSCP discrimination of MHC alleles

Major histocompatibility complex (MHC) genotyping still remains one of the most challenging issues for evolutionary ecologists. To date, none of the proposed methods have proven to be perfect, and all provide both important pros and cons. Although denaturing capillary electrophoresis has become a popular alternative, allele identification commonly relies upon conformational polymorphisms of two single‐stranded DNA molecules at the most. Using the MHC class II (β chain, exon 2) of the black kite (Aves: Accipitridae) as our model system, we show that the simultaneous analysis of overlapping PCR amplicons from the same target region substantially enhances allele discrimination. To cover this aim, we designed a multiplex PCR capable to generate four differentially sized and labeled amplicons from the same allele. Informative peaks to assist allele calling then fourfold those generated by the analysis of single PCR amplicons. Our approach proved successful to differentiate all the alleles (N=13) isolated from eight unrelated birds at a single optimal run temperature and electrophoretic conditions. In particular, we emphasize that this approach may constitute a straightforward and cost‐effective alternative for the genotyping of single or duplicated MHC genes displaying low to moderate sets of divergent alleles.