基于单片机的智能充电控制器的设计与应用

根据锂电池充电的特点,结合市面上常用充电器本身存在的缺点探讨一种新型的采用单片机控制的智能型充电控制器的设计与应用,该装置具有智能控制充电进程,智能判断充电终止状态,有效防止锂电池的欠充或过充,具有高效安全的充电控制和保护功能.     

基于MAX155和KMZ52的电子指南针的实现

介绍了电子指南针的工作原理，采用高速A／D转换器MAX155，完成了对KMZ52二维磁阻传感器输出信号的同时采样，提高了系统的精度．同时，采用跳转技术对偏差及温度漂移进行了补偿，减少了温度等因素对本系统造成的影响．     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

MAX+Plus与数字电路教学

在高职教育中,受教育成本和资金的限制,实验室并不具备相关的设计环境.就EDA设计理念和工具在普通数字电路教学中的应用做简要探讨,以期得到融传统教学方式和现代化设计理念为一体的教学效果.     

基于EDA技术的继电控制回路设计

指出了机电设备常见电气继电控制在使用中的不足，阐述了在继电控制回路的开发设计中运用EDA技术的可行性，介绍了用VHDL语言设计单片控制系统的方法，给出了电机周期性正反转运行的VHDL设计程序和仿真波形图．仿真结果证明了这种设计方法的正确性．这种设计理念对传统电气继电控制的设计是一种挑战．     

闸门控制系统中通信机的设计

文章以三河闸闸门监控系统为例讨论了通信机模块的设计原理和方案 ,介绍了同时对多个开度仪上传的数据进行接收与处理的方法和通信机将数据上传至PLC的方法     

用MAX+plusII实现数字电路实验中的仿真

介绍了利用MAX +PLUSII实现数字电路实验仿真的特点及其在数字电路实验中的应用     

Fabrication of Ti2SnC-MAX Phase Blended PES Membranes with Improved Hydrophilicity and Antifouling Properties for Oil/Water Separation

In this research work, the Ti₂SnC MAX phase (MP) was synthesized via the reactive sintering procedure. The layered and crystalline structure of this MP was verified by SEM, HRTEM, and XRD analyses. This nano-additive was used for improvement of different features of the polyethersulfone (PES) polymeric membranes. The blended membranes containing diverse quantities of the MP (0–1 wt%) were fabricated by a non-solvent-induced phase inversion method. The asymmetric structure of the membranes with small holes in the top layer and coarse finger-like holes and macro-voids in the sublayer was observed by applying SEM analysis. The improvement of the membrane’s hydrophilicity was verified via reducing the contact angle of the membranes from 63.38° to 49.77° (for bare and optimum membranes, respectively). Additionally, in the presence of 0.5 wt% MP, the pure water flux increased from 286 h to 355 L/m² h. The average roughness of this membrane increased in comparison with the bare membrane, which shows the increase in the filtration-available area. The high separation efficiency of the oil/water emulsion (80%) with an improved flux recovery ratio of 65% was illustrated by the optimum blended membrane.     

基于MAX1320的多通道同步数据采集卡的实现

设计了基于MAX1320的多通道同步数据采集卡,通过CPLD逻辑控制,采用C 设计驱动程序,实现了对多达8路信号的同步采样,满足了多点温度信号同步采样的要求.数据采集卡结构简单、可靠,符合PC104总线规范,相关软件编制方便.     

DSP的直接存储控制器DMA的接口设计

介绍了TMS320VC5410DSP的直接存储控制器DMA的特点，给出了一种适用的DMA结合外部中断组成的数据采集系统的设计方案，该设计具有设计灵活、硬件简单、CPU执行效率高的特点。