一种新的WDM光网中的共享链路保护策略

研究了WDM光网中的链路保护问题.提出了一种新的共享链路保护策略--基于SRLG的共享链路保护策略(SRLG-SLP).SRLG(共享风险链路组)定义了对一条工作光通道分配保护资源时的资源可用性的约束.它规定任意两条有着同样故障风险或者说处于同一个SRLG的工作光通道不能利用同样的保护资源.另外,还提出了一种更加符合实际的单链路故障模型,其中链路故障间隔时间和链路故障保持时间被考虑作为两个独立的变量.基于该链路故障模型,通过大量的仿真试验,比较了专用链路保护(DLP)、共享链路保护(SLP)和提出的SRLG-SLP保护策略的资源利用率、保护效率以及业务中断率.结果显示,我们提出的SRLG-SLP在保护效率和业务中断率方面的保护性能远好于DLP和SLP,但会牺牲一些资源利用率.     

Radiolytic unsaturation decay in polyethylene. Part III—the effect of certain chain transfer agents

Small amounts of certain halogenated compounds are found to have, at most, only a slight enhancing effect on the radiolytic decay rates of added poly-unsaturated compounds in polyethylene, but significantly increase the elastic modulus at 433 K (melt modulus) obtained thereby. Experiments with model chlorine-containing additives suggest that this increase is due to a more random distribution of polymer and monomer mediated crosslinks in the polymer, that it does not result from a significant increase in crosslinking and that it is mediated by chlorine atoms, in a similar manner to radiolytic hydrogen atoms, through facilitation of long range free radical migration. Although low molecular weight chloro-paraffins inhibit radiolytically induced growth of melt modulus in monomer containing polyethylenes, even very small additions of chlorinated polyethylenes, which form a separate phase, increase the melt modulus. This again indicates that the active species is the chlorine radical.     

Influence of annealing and chain defects on the melting behaviour of poly(vinylidene fluoride)

The melting behaviour of poly(vinylidene fluoride) (PVDF) was investigated by differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering in order to study the influence of the chain defects content and of the temperature of annealing on the crystallization and melting behaviour.All the DSC scans show a double endotherm and the analysis of the data suggests that the low temperature endotherm is due to the melting of a population of thin lamellae, whose thickness increases during the annealing, but a high content of chain defects prevents the lamellar thickening and the main effect in this case is the crystallization of thin lamellae from a portion of polymer which did not crystallize during the quenching from the melt. Furthermore, the two melting endotherms, which are observed, can be partially ascribed to a melting-recrystallization process.Furthermore, stepwise isothermal cooling was performed in a differential scanning calorimeter followed by melting scans of fractionated PVDF samples to point out the possible presence of a series of endothermic peaks.     

中小企业ERP实施成因初探

通过对一个中小企业实施ERP的典型案例分析，归纳出了中小企业实施ERP失败的主要原因。并给出了中小企业实施ERP成功的要点。     

教学质量的时齐马尔可夫链评估法

本文研究了教学质量评估中的一种定量分析方法──时齐马尔可夫链评估法．阐明了这种方法的理论依据及其实施程序、并指出它较之其他教学质量评估法更显合理．     

线性代数网上学习系统的开发与研究

本文简要介绍线性代数学习网站的系统研究与开发设计．涉及到网络数据库、ASP、界面设计等多种技术.该线性代数网上学习系统为老师和学生提供了交流平台，其界面美观、操作简便．具有良好的应用前景.     

A rheological analysis of interactions in phenoxy/organoclay nanocomposites

Novel oscillatory flow results of phenoxy/organoclay nanocomposites are analysed considering the blocking effect of nanostructure on polymer chain mobility. The modification provoked by this hindering effect on loss tangent spectrum is investigated. The study of three different systems, involving a pristine montmorillonite and two montmorillonites modified with one alkyl tail and two alkyl tails, respectively, leads to conclude that polymer-alkyl repulsive interactions play the most important role in the chain mobility obstruction process. Our results suggest that polymer-alkyl interactions increase with temperature.     

超高分子量PE凝胶膜的超拉伸性与旁式构象关系研究

通过ＩＲ方法，观测并讨论了在不同条件下制备的超高分子量ＰＥ（ＷＨＭＰＥ）凝胶膜中旁式（Ｇ构象）构象与超拉伸性的关系，提出了Ｇ构象浓度及分布对ＵＨＭＰＥ凝胶膜超拉伸性影响的新概念，同时也讨论了它与链缠结之间的联系，发现：反映Ｇ构象的相对浓度的比值σ＝Ｉ１３０３Ｉ１３５２随制膜浓度的增大而增加，在临界浓度Ｃ０（０．４～０．５ｇ＠１００ｍｌ）附近所形成的膜，具有超高拉伸性（λ＝２００），其Ｇ构象的变化与Ｍａｔｓｕｏ由比浓粘度提出的缠结链改变相对应；热处理温度比热处理时间对σ值的影响更显著，在一定温度下约４分钟后σ值基本不变；在σ值最低的温度范围拉伸，凝胶膜具有良好的超高拉伸性．     

Synthesis,Spectroscopic and EPR Results and Crystal Structure of Copper(II) Formato Derivatives with Pyrazine and Dimethylpyrazines

The complexes of copper formato with pyrazine and dimethylpyrazines: Cu(HCOO)₂(pyrz) ( 1 ), Cu₂(HCOO)₄(pyrz) ( 2 ), Cu₂(HCOO)₄(2,3‐Me₂pyrz) ( 3 ), Cu₂(HCOO)₄(2,5‐Me₂pyrz) ( 4 ), and Cu₂(HCOO)₄(2,6‐Me₂pyrz)₂ ( 5 ) have been synthesized and characterized by chemical analysis and IR and electronic spectro scopies. The three‐dimensional structure of compound 1 consists of –Cu–pyrz–Cu–pyrz– chains joined by bridging formate groups coordinated, in configuration syn‐anti, to two copper atoms. The coordination around the copper atom is orthorhombic with two Cu–O distances of 2.374(1) Å, two Cu–O of 1.952 Å and two Cu–N of 2.080 Å. Compound 5 is formed by molecular dimers with the [Cu₂(μ‐HCOO)₄] unit, two copper atoms and four syn‐syn fomate groups, and two ligands coordinated to the copper atoms in the axial positions. In compounds 2 and 3 chains of [Cu₂(μ‐HCOO)₄] dimers with pyrz or 2,3‐Me₂pyrz as bridging ligands are formed. The EPR signal of 1 is orthorhombic (g = 2.23, 2.20 and 2.06). In the EPR spectra of 2 – 5 compounds the triplet (S = 1) signals are observed. The g_?, g_∥ and D values are been calculated.     

The stability of poly(m-carborane-siloxane) elastomers exposed to heat and gamma radiation

Poly(m-carboranyl-siloxane) elastomers containing a mixture of di-methyl- and methylphenyl-silyl units were synthesised using the ferric chloride catalysed condensation reaction between di-chloro-diorganosilane and bis(di-methylmethoxysilyl)-m-carborane. These elastomeric materials were originally developed to have greater stability to extreme thermal environments and retain tailorable physical and chemical properties relative to comparable non-carborane containing elastomers. Prepared samples were aged either by heating in air at elevated temperatures or by gamma irradiation from a ⁶⁰Co source. Multinuclear (¹H, ¹³C and ¹¹B) solid and solution state nuclear magnetic resonance (NMR) was used to assess degradation. This included measurements of segmental chain dynamics using a solid-echo pulse sequence reflecting changes in crosslink density and assessing changes to the carborane fragment by ¹¹B and ¹H Magic Angle Spinning (MAS) methods. Thermogravimetric measurements were also performed to assess thermal stability. Gamma radiation (to a dose of 1 MGy) was found to induce only a small degree of elastomer hardening as evidenced by a reduction in segmental chain dynamics. The carborane cage however, remained intact at these dose levels. Thermal degradation was observed to lead to oxidative crosslinking, the degree of which is dependent on temperature. At temperatures below 350 °C, only small changes in segmental dynamics were observed commensurate with only minor weight loss at this temperature. At temperatures above 350 °C, the degradation of the elastomer increased dramatically with decreased segmental dynamics and presumed partial oxidation of the carborane cage. The integrity of the m-carborane cage and the segmental dynamics were found to be significantly reduced at temperatures above 580 °C, in line with the known cage rearrangement temperature for icosahedral carboranes.