PXI在测控系统中的应用

随着有关PXI总线的规范和产品的推出，由于优良的性能指标和适宜的价格，使其受到各相关行业的广泛关注。对风洞测控系统的结构和系统配置作了具体的阐述，并对PXI总线在具体使用中的效果和特点作了较详细的介绍。     

基于模糊控制的公路隧道通风控制系统

提出了一种新型的基于模糊控制的公路隧道通风控制系统,将CO浓度值和烟雾浓度值作为系统输入,风机数值作为系统输出。仿真结果显示,这种模糊通风控制系统用在隧道通风控制系统中可以缓解传统的分级式控制的风机频繁启停的问题。     

提高无调中转比重 确保侯北枢纽畅通

侯马铁路北站担负着南同蒲、侯月、侯西线到发货物列车的改编和中转作业，随着南同蒲、侯月、侯西线不断增量，侯北站堵塞情况时有发生。强化调度指挥，优化运输组织，提高无调中转比重，对侯北枢纽畅通至关重要。     

铁路曲线状态下横向力的研究

阐述了横向力计算的必要性,介绍了铁路曲线状态下横向力的计算方法,通过计算得出了横向力与车重、超高、速度、曲线半径的关系, 并提出了减小横向力的主要措施.     

Using multi-exposure of color fringes to measure the beating motion of a moth

A multi-exposure of color fringes method has been developed to improve the capture speed of a conventional color CCD camera. In the method, four groups of projected fringe patterns encoded with different colors and different directions are stored in one CCD frame. Therefore the capture frequency of the conventional CCD can be improved to 200 Hz. It is available to measure the insect wings with low beating frequency, such as dragonfly, moth, or butterfly, whose beating frequency is about 30–40 Hz. We have used the method to measure the beating motion of a moth successfully.     

张峰水库一干1号至4号隧洞工程地质条件评析

以野外第一手资料为基础，参照岩土物理力学性质参数，对张峰水库一干1号至4号隧洞围岩进行了工程地质条件的分析与评价。     

安龙铺隧道进出口浅埋段塌方处理方案

以安龙铺隧道为例,分析影响隧道开挖的工程地质条件、地下水对隧道主体结构的不利影响、地表注浆加固岩体的设计与施工,总结隧道进出口浅埋段施工应注意的事项及塌方后相应的处理措施.     

一维无序体系电子跳跃导电研究

建立了电子隧穿电导模型,推导了一维无序体系新的直流电导公式.通过计算20000格点无序体系的直流电导率,分析了直流电导率和温度及外场电压的关系,讨论了无序度对直流电导的影响.计算结果表明,无序体系的直流电导率随无序度的增加而减小;外加电场较小时,电导率相对较大,且出现一系列峰值,电压较大时,电导率反而较小;无序体系在低温区出现了负微分电阻特性,电导率随温度的升高而增大,在高温区电导率随温度的升高而减小.计算结果和实验符合很好 关键词： 无序体系 电子隧穿 直流电导率     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.