3D-TOFSIMS characterization of black spots in polymer light emitting diodes

The occurrence and formation of black spots areas in PolyLED devices has been studied by time-of-flight SIMS (TOFSIMS). The composition, shape and position of the black spots is visualised by three-dimensional (3D)-TOFSIMS depth-profiling. It has been established that the formation of non-emissive spots is due to the growth of aluminium oxide clusters at the AlBa/polymer interface. Electron injection in the black spots is lost by the resulting local increase of the resistivity of the cathode.     

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

On the correlation between order parameter, superconducting volume fraction and critical current density in R: 123 superconductors

Resistivity and low field ac susceptibility measurements are made on R: 123 superconducting samples with different rare earth elements R. The order parameter dimensionality OPD is deduced from resistivity versus temperature plot using the Aslamazov and Larkin expression, while the analysis of the temperature dependence of ac susceptibility is done employing Beans’ critical state model and with the help of the Ravi expression. With increasing R, the critical temperatures T_c are nearly kept constant (∼90 K), while the crossover temperatures T_o are shifted to lower values. Moreover, the superconducting order parameter OPD is shifted toward 2D behavior. On the other hand, the values of superconducting volume fraction f_g decrease with increasing ac field amplitude H_m for all samples and it is higher in Er: 123 sample than in Nd: 123 sample. Although the values of critical current density J_c at the peak temperature T_m are nearly unchanged with increasing R, the values of J_c(T), at T<T_m and T>T_m, are found to be dependent on the chosen R. The correlation between the above calculated parameters against R is also mentioned.     

关于Terrell转动的一点商榷

<正>《大学物理》1985第l期上发表了胡先生有关"Terrell转动"的文章。作者的结论是:"综上所述,"......v>ccos时,能同时看到后表面,侧面和反转了的前表面,一,在v=c时,相当于静止立方体转动了尤一e的角度,并且看起来似乎是透明的."     

Thermodynamic properties of organic compounds in aqueous solution. II. Apparent molal heat capacities of piperidines,morpholines, and piperazines

Apparent molal heat capacities of some piperidine, morpholine, and piperazine derivatives in aqueous solution have been determined by adiabatic calorimetry in the temperature range 20–55°C and in the molality range 0.2–1m. Comparison of experimental values with those calculated through group contributions, found for monofunctional compounds, indicates strong interactions between the hydrophilic centers. An interpretation is given of the possible mechanism of this interaction. Also, values of ΔC _p for the addition reaction of proton to nitrogen centers of mono- and bifunctional organic compounds are examined.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

On the apparent molar volumes of nonelectrolytes in water

Apparent molar volumes of aqueous solutions of argon and xenon have been calculated using a previously developed comprehensive equation of state for nonelectrolyte systems. The equation consists of a virial expansion truncated after the fourth virial coefficient and a closed-form term approximating higher coefficients. Mixing rules are based on the composition dependence of virial coefficients, which is known from statistical mechanics. The equation accurately represents vapor-liquid and gas-gas equilibria for the Ar+H₂O and Xe+H₂O systems over wide ranges of pressure and temperature using two binary parameters. With the binary parameters determined from phase equilibrium data, the equation accurately predicts apparent molar volumes V in the near-critical and far-from-critical regions. Apart from reproducing experimental V data, the equation reveals remarkable maxima of V as a function of pressure and temperature in the near-critical region. The implications of this equation with respect to the Ar–H₂O potential are discussed via the second virial coefficient.     

H2O−D2O solvent isotope effect in the volume behavior of some high-charge high-size electrolytes

The apparent molar volumes V of KCl, BaCl₂, K₂SO₄, LaCl₃, Co(en)₃Cl₃ [Tris(ethylenediamine)cobalt(III) chloride], K₃Co(CN)₆, K₃Fe(CN)₆, K₄Fe(CN)₆, and Ba₃[Co(CN)₆]₂ have been determined at 25°C in both light and heavy water. The V values in D₂O are systematically lower and increase more rapidly with salt concentration than the V in H₂O. The volume of transfer from H₂O to D₂O as well as the partial molar volume at infinite dilution in both solvents have also been calculated. These results together with literature values for other electrolytes were used to estimate both of these quantities for D₂O solutions of individual ions. The predictions of ion hydration models and ion-ion interactions are compared with experimental observations.     

Volumetric Properties for the Electrolyte (NaCl,NaBr and NaI) Monosaccharide (D‐Mannose and D‐Ribose)‐Water Systems at 298.15 K

Densities have been measured for the electrolyte (NaCl, NaBr and NaI)‐monosaccharide (D ‐mannose and D‐ribose)‐water solutions at 298.15 K. These data have been used to calculate the apparent molar volumes of the saccharides (V_Φ,S) and electrolytes (V_Φ,E) in the studied solutions. Infinite dilution apparent molar volumes, V_Φ,S⁰ and V_Φ,E⁰, have been evaluated, together with the standard transfer volumes of the saccharides (Δ_tV_S⁰) from water to aqueous electrolyte solutions and those of the electrolytes (Δ_tV_E⁰) from water to aqueous saccharide solutions. It was shown that both the Δ_tV_S⁰ and Δ_tV_E⁰ values are positive and increase with increasing molalities of sodium halides and saccharides, respectively. Overall, the Δ_tV_S⁰ and Δ_tV_E⁰ values have the order of NaCl > NaBr > NaI except for NaI‐ribose and NaI‐ribose. Volumetric interaction parameters for the electrolyte‐monosaccharide pairs in water were obtained and interpreted by the stereochemistry of the monosaccharide molecules and the structural interaction model.     

不同类型聚合物溶液对采油残余油的作用机理研究

通过实验测定了HPAM溶液和黄原胶溶液的流变性、在多孔介质中的流变性和残余阻力系数 ,计算了衰竭层效应 .用不同的浓度和注入速度进行了驱油实验 .提出聚合物分子缠结作用的增强不仅引起表观粘度增加或衰竭层厚度降低 ,而且使平行于油水界面的拉动残余油的力增加 ,从而使残余油饱和度降低 ,采收率提高 .随浓度增加 ,HPAM溶液的表观粘度和残余阻力系数增加 ,衰竭层厚度减小 ;黄原胶溶液的浓度高于缠结浓度时 ,衰竭层厚度和表观粘度变化不大 .注入速度增加时 ,两种聚合物溶液的衰竭层厚度均降低 ,HPAM溶液的残余阻力系数不变 ,粘弹性增加 ;而黄原胶溶液的残余阻力系数下降 .不同浓度和注入速度情况下两种聚合物溶液的驱油结果证实了文中提出的聚合物分子缠结作用和衰竭层效应对残余油的作用机理 .分子结构的不同是造成两种聚合物溶液在多孔介质中渗流规律和对残余油作用机理的差别的根本原因 .