玻璃钢地下输水管的生产工艺

阐述了生产玻璃钢地下输水管道的工艺流程及管壁各层的设计内容及其作用,分析了各工艺中的工艺要点,并给出了生产工艺数据。     

外贴FRP加固钢筋混凝土梁用量显式设计方法

对外贴FRP（纤维增强复合材料）加固钢筋混凝土梁抗弯极限承载力的求解问题，ACI440F规范及我国CECS146：2003规程都给出了相应的求解公式，但均为验算形式．这在面向设计，即计算给定目标承载力下的FRP用量时，并不方便．针对矩形截面形式，通过引入原构件配筋特征参数和FRP配筋特征参数，推导出量纲-形式的弯矩增量与参数之间的关系表达式，并给出显式求解FRP用量的计算方法．在此基础上，进一步通过定义截面形状系数，将这一显式求解方法推广至T形及更为一般性的截面形式．     

FRP及FRP-混凝土组合结构的耐久性能探讨

通过对FPR材料本身的抗化学侵蚀性能、疲劳性能、冲击韧性、抗冻性等指标的耐久性研究,对FRP 混凝土组合结构的设计、施工措施进行了分析,探讨FRP 混凝土组合结构的耐久性能。     

Anchorage strength models for end-debonding predictions in RC beams strengthened with FRP composites

The increase in the flexural capacity of RC beams obtained by externally bonding FRP composites to their tension side is often limited by the premature and brittle debonding of the external reinforcement. An in-depth understanding of this complex failure mechanism, however, has not yet been achieved. With specific regard to end-debonding failure modes, extensive experimental observations reported in the literature highlight the important distinction, often neglected in strength models proposed by researchers, between the peel-off and rip-off end-debonding types of failure. The peel-off failure is generally characterized by a failure plane located within the first few millimetres of the concrete cover, whilst the rip-off failure penetrates deeper into the concrete cover and propagates along the tensile steel reinforcement. A new rip-off strength model is described in this paper. The model proposed is based on the Chen and Teng peel-off model and relies upon additional theoretical considerations. The influence of the amount of the internal tensile steel reinforcement and the effective anchorage length of FRP are considered and discussed. The validity of the new model is analyzed further through comparisons with test results, findings of a numerical investigation, and a parametric study. The new rip-off strength model is assessed against a database comprising results from 62 beams tested by various researchers and is shown to yield less conservative results. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 373–388, May–June, 2008.     

玻璃钢围覆加固混凝土梁的试验研究

通过对三面围覆玻璃钢进行加固的钢筋混凝土Ｔ型梁的试验，得出了外围覆玻璃钢能提高梁的抗弯能力，并通过理论分析及参考《混凝土结构设计规范》，提出了实用的计算公式，为在混凝土结构加固工程中应用这种新材料作了有益的探索。     

冻融循环与持续荷载共同作用下FRP片材-混凝土界面黏结性能的退化行为

为研究冻融循环影响下纤维增强复合材料(FRP)外贴加固混凝土结构的界面性能,通过双面剪切试验研究冻融循环与持续荷载共同作用下FRP片材-混凝土界面黏结性能的退化行为。在经历最大200次冻融循环作用后,对试件进行静态加载,并采用数字图像相关法量测试件表面的全场位移,进而计算界面黏结滑移关系。试验结果表明:冻融循环作用对FRP片材-混凝土界面的极限承载力、极限滑移、FRP最大应变、最大剪应力、界面断裂能等均有明显的削弱作用,界面黏结滑移曲线退化显著;预加荷载的存在加剧了冻融循环作用后界面黏结性能的退化;冻融循环作用前后界面的破坏模式也发生了显著改变。     

光纤传感器测量FRP加固结构的损伤

A distributed fiber optic sensor is developed for condition monitoring of civil infrastructure sys-tems. The fiber optic sensor is especially useful in applications involving structures strengthened by fiberreinforced polymer (FRP) composites. The sensor principles are simple and therefore, practical for detec-tion of cracks, debonding and deformation measurements. Structural monitoring capability of the sensor     

Interfacial stresses in curved members bonded with a thin plate

The use of steel plates or externally bonded fibre-reinforced polymer laminates for flexural strengthening of concrete, masonry, timber or metallic structures is a technique that has become very popular. The effectiveness of this technique hinges heavily on the performance of the bond between the strengthening plate and the substrate, which has been the subject of many existing studies. In particular, the interfacial stresses between a beam and a soffit plate within the linear elastic range have been addressed by numerous analytical investigations. Surprisingly, none of these investigations has examined interfacial stresses in members with a curved soffit, despite that such members are often found in practice. This paper presents an analytical model for the interfacial stresses between a curved member of uniform section size and a thin plate bonded to its soffit. The governing differential equations for the interfacial shear and normal stresses are formulated and then solved with appropriate simplifying assumptions. Two numerical examples are presented to illustrate the effect of the curvature of the member on the interfacial stress distributions in a simply supported curved beam for the two cases of a point load and a uniformly distributed load. The analytical solution is verified by comparing its predictions with those from a finite element model.     

杂交梁界面剪应力的理论分析和数值模拟

采用解析和数值方法研究FRP-混凝土杂交梁的界面应力问题。提出了杂交梁的新的力学模型和假设,克服了以往的分析模型中界面应力表达式非常复杂和界面应力的解析解与数值解相差较大的缺点,本文得到的FRP板加固梁的界面剪应力表达式与数值结果符合很好,并且具有简捷的表达式。利用有限元法研究了杂交梁各物理参数对界面剪应力的影响。研究表明,界面剪应力在FRP板的端部存在应力集中或应力奇性,这是造成杂交梁界面破坏的主要原因。这项研究对进行杂交结构的工程设计具有理论指导和参考价值。     

FRP筋粘结式锚具的界面径向弹性模量分析

建立了FRP(Fibre Reinforced Polymer)筋粘结式锚具粘结界面的Rib-scale模型和Bar-scale模型,然后利用Fourier-Bessel级数推导了FRP筋、混凝土以及钢套筒等在径向应力作用下的解析解.解析解与数值解吻合较好,验证了用Fourier-Bessel级数表达的解析解的有效性....