催化动力学光度法测定水中痕量铁

本文研究了ｐｈ５．０的ＨＡｃ－ＮａＡｃ介质中，痕量铁催化过氧化氢氧化紫脲酸的褪色反应，建立了催化动力学光度法测定痕量铁的新方法，方法的线性范围０－０．４０，０．４０－２．０μｇ／２５ｍＬ，检出限为８×１０＾－１１ｇ／ｍＬ，用于水样中痕量铁的测定，结果满意。     

有限群的π′－闭性

将Ｅｎｇｅｌ条件进行了推广，利用（ｐ，ｑ）－子群的性质，得到了有限群为π′－闭的几个重要结果。     

[Na(18-C-6)]2[Cu(i-mnt)2]的合成与结构分析

研究了18-冠-6与Na2[Cu(i-mnt)2][i-mnt=异丁二腈烯二硫醇阴离子,S2CC(CN)2-2]的反应,得到的配合物[Na(18-C-6)]2[Cu(i-mnt)2](1)通过元素分析、红外光谱、X射线单晶衍射进行了结构分析.配合物为单斜晶系,空间群P2(1)/c.晶体学结构数据a=1.2819(11),b=1.1793(10),c=1.4928(13)nm,β=99.121(16)°,V=2.228(3)nm3,Z=2,Dcaled.=1.369g/cm3,F(000)=958,R1=0.0521,wR2=0.1003.1中的[Cu(i-mnt)2]基团通过配体i-mnt的氮原子与两个[Na(18-C-6)]基团中的钠原子成键,形成稳定的中性配合物.     

Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.     

城市技术创新促进城乡统筹发展的研究

揭示了城市技术创新系统和城乡统筹发展的内涵,并在技术创新、增长极和区域经济等理论框架下阐述了城市技术创新与城乡统筹发展的关系,进而提出城市技术创新促进城乡统筹的路径。     

FAST ACCURATE PREDICTION OF BLANK SHAPE IN SHEET METAL FORMING

By using the Finite Element Inverse Approach based on the Hill quadratic anisotrop-ically yield criterion and the quadrilateral element, a fast analyzing software-FASTAMP for the sheet metal forming is developed. The blank shapes of three typical stampings are simulated and compared with numerical results given by the AUTOFORM software and experimental results, respectively. The comparison shows that the FASTAMP can predict blank shape and strain distribution of the stamping more precisely and quickly than those given by the traditional methods and the AUTOFORM.     

混合位级正交试验设计的极差分析方法

本文指出，在混合位级的正交试验设计中，以往的极差分析方法存在着不足。本文给出了极差的修正方法，并用大量实例做了数值验证，说明这个修正确实很有效     

羰基镍分析报警仪

羰基镍分析报警仪运用化学发光原理构成，不仅适用于羰基镍生产车间现场的检测和报警，也适于实验室的研究工作。检出限达0.037mg/m^3(0.5ppb），响应时间2min。     

理论价格调整与增加价值调整关系的一个数学模型及分析

本文利用矩阵理论及投入产出分析方法建立了价格指数与增加价值平衡方程,推导出价格调整与增加价值调整关系的数学模型,并对其模型的特点及经济意义进行了分析,为价格调整中的决策者作定量及定性分析时提供参考。     

产品原理方案的功能设计法──“管接头标记自动压印机”的原理方案设计

本文通过“管接头标记自动压印机”原理方案的构思过程，说明产品原理方案设计的功能论方法的一般原理和特点及其应用。