基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

Linearization of column responses by correlation chromatography. Separation improvement and reduction of undesired adsorption effects

Summary Experiments and simulations prove that correlation chromatography can greatly reduce the disadvantage of a non-linear response of the chromatographic column. A factor that has been accepted as being an important source of error in correlation or multiplex chromatography, has been shown not to be. Separations affected, improve dramatically when correlation chromatography is used, and a substantial amount of correlation noise only arises when there is a large difference in separation between a conventional chromatogram and a correlogram.A model has been developed for simulating these nonlinearities. It is shown that, especially for correlation chromatography, the simulation results match the practical measurements very well.     

Using activity focus networks to pressure terrorist organizations

The predominant idea for using network concepts to fight terrorists centers on disabling key parts of their communication networks. Although this counternetwork strategy is clearly a sound approach, it is vulnerable to missing, incomplete, or erroneous information about the network. This paper describes a different and complementary application of network concepts to terrorist organizations. It is based on activity focus networks (AFNs), which represent the complex activity system of an organization. An activity focus is a conceptual or physical entity around which joint activity is organized. Any organization has a number of these, which are in some cases compatible and in some cases incompatible. The set of foci and their relations of compatibility and incompatibility define the AFN. A hypothetical AFN for a terrorist organization is specified and tested in a simulation called AQAS. It shows that certain activity foci, and in particular one combination, have high potential as pressure points for the activity system. The AFN approach complements the counternetwork approach by reducing the downside risk of incomplete information about the communication network, and enhancing the effectiveness of counternetwork approaches over time. Steven R. Corman is Professor in the Hugh Downs School of Human Communication at Arizona State University and Chair of the Organizational Communication Division of the International Communication Association. His research interests include communication networks and activity systems, high-resolution text and discourse analysis, and modeling and simulation of human communication systems.     

An optimal design of collateralized mortgage obligation with PAC-companion structure using dynamic cash reserve

This paper presents a model for optimally designing a collateralized mortgage obligation (CMO) with a planned amortization class (PAC)-companion structure using dynamic cash reserve. In this structure, the mortgage pool’s cash flow is allocated by rule to the two bond classes such that PAC bondholders receive substantial prepayment protection, that protection being provided by the companion bondholders. The structure we propose provides greater protection to the PAC bondholders than current structures during periods of rising interest rates when this class of bondholders faces greater extension risk. We do so by allowing a portion of the cash flow from the collateral to be reserved to meet the PAC’s scheduled cash flow in subsequent periods. The greater protection is provided by the companion bondholders exposure to interest loss. To tackle this problem, we transform the problem of designing the optimal PAC-companion structure into a standard stochastic linear programming problem which can be solved efficiently. Moreover, we present an extended model by considering the quality of the companion bond and by relaxing the PAC bondholder shortfall constraint. Based on numerical experiments through Monte Carlo simulation, we show the utility of the proposed model.     

Simulation of Weld Depth in A-TIG Welding with Unified Arc-electrode model

Ｉｔｋｎｏｗｎｔｈａｔｓｍａｌｌａｍｏｕｎｔｓｏｆｆｌｕｘｏｎｔｈｅｓｕｒｆａｃｅｏｆｓｔａｉｎｌｅｓｓｓｔｅｅｌｃａｎｉｎｃｒｅａｓｅｔｈｅｄｅｐｔｈｏｆｗｅｌｄｐｅｎｅ ｔｒａｔｉｏｎｉｎＴＩＧｗｅｌｄｉｎｇｂｙａｆａｃｔｏｒｏｆｔｈｒｅｅ[1] .Ｔｈｉｓｐｒｏｃｅｓｓｉｓｒｅｆｅｒｒｅｄｔｏａｓ”ＡＴＩＧ”ｏｒＴＩＧｗｅｌｄｉｎｇａｃｔｉ ｖａｔｅｄｂｙｆｌｕｘ .Ｔｈｅｒｅｈａｖｅｂｅｅｎｔｈｒｅｅｐｕｂｌｉｓｈｅｄｐｈｙｓ ｉｃａｌｍｅｃｈａｎｉｓｍｓｔｈａｔａｒｅｐｏｓｓｉｂｌｅｃｏｎｔｒｉ…     

Anisotropic elastodynamics in a half space: An analytic method for polynomial data

An initial boundary value problem for the dynamic system of anisotropic elasticity in a half space is studied in the paper. A novel method of finding an exact solution of this problem for a special polynomial form of initial data and inhomogeneous term of the system is described. On the base of this method the simulation of elastic waves in different homogeneous anisotropic half spaces is implemented.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

以Monte Carlo为基础的发电系统随机生产模拟的韦伯分布法

介绍了Monte Carlo方法的基础上,分析了以往的文献中发电系统的随机生产模拟分布的不足之处后,提出了发电系统随机生产模拟的韦伯分布法及模拟方法。     

Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.