一种用于PLC的模拟量／开关量转换电路

本文以可编程逻辑控制器(PLC)在某大型远洋测量船上首次成功的应用为例,提出一种简便、实用、可靠的模拟量/开关量转换电路。     

Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

全气相化学激光体系的直流放电研究

 为了提高化学激光体系(AGIL)中F原子的产率，采用直流放电引发方式，对棒式电极的放电特性进行了研究。在对NF3/He混合气体进行解离时，通过选择不同平衡电阻，得到了3 kW左右的放电注入功率。用光谱分析仪对F原子产率进行了测量。通过拟合计算可得：一个NF3分子能够解离出1.3～1.5个F原子。     

Motion Control by ZV Shaper Synthesis Extended for Fractional Systems and Its Application to CRONE Control

Shaping command input or preshaping is used for reducing system oscillation in motion control. Desired systems inputs are altered so that the system finishes the requested move without residual oscillation. This technique, developed by N.C. Singer and W.P. Seering, is used for example in the aerospace field, in particular in flexible structure control. This paper presents the study of ZV shaper for explicit fractional derivative systems (generalized derivative systems). A robustness study of ZV shaper is then presented and applied to improve second generation CRONE control response time. Results from simulation and from a DC motor bench are also given.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

自动启闭窗帘控制器的设计

介绍了直流电源、555时基电路、电磁继电器和光敏电阻,论述了自动启闭窗帘控制器的电路设计。     

直流放电制备CN自由基及其LIF探测

CN自由基是研究化学反应动力学的典型自由基，CN的动力学行为，如CN＋O2的反应已成为研究自由基－自由基反应的模型体系[1]，同时也在许多实际过程如燃烧过程，星际气体的形成过程中起着重要的作用[2，3]．利用含有CN的化合物进行光解、放电、与亚稳态原子分子进行传能反应是目     

Three-Dimensional Modeling of the Turbulent Plasma Jet Impinging upon a Flat Plate and with Transverse Particle and Carrier-Gas Injection

Modeling results are presented concerning the turbulent thermal plasma jet impinging normally on a substrate and with transverse injection of feedstock particles and their carrier gas from a single injection tube. The k- two-equation model is employed to model the turbulence, and particle dispersion is studied considering the interaction between the moving particles and turbulent eddies and considering the effect on particle trajectories of the random variation of the turbulent fluctuating velocities in their magnitude and direction. A well-validated three-dimensional (3-D) computer code is used in the modeling. The 3-D effects due to the carrier gas injection on the jet flow field and thus on the particle trajectories and heating histories are shown to be appreciable. The radial location of the injection tube with respect to the plasma jet is shown to be a critical parameter for the study of 3-D effects, besides the carrier-gas/plasma stream mass flux ratio. Particle dispersion considerably widens the distribution of the particle trajectories and heating histories. In addition, although pertinent swirl number is often rather small, swirling may also affect the modeling results.     

Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

Caracterisation par analyse calorimetrique differentielle des complexes entre LiAlH4 et les ethers-couronnes 12-C-4, 15-C-5, dicyclohexano-18-C-6

The thermal behaviour of complexes [Li⁺-EC](AlH₄)^– withEC=12-C-4, 15-C-5, DC 18-C-6 (cis-anti-cis andcis-syn-cis isomers) was investigated by Differential Scanning Calorimetry (DSC). These complexes were prepared as solids from benzene solutions. Pure EC and several solvated species [Li⁺-EC](AlH₄)^–·nC₆H₆ (EC=15-C-5, DC 18-C-6syn) were also studied. DSC has revealed various phenomena. Solid-solid transitions were observed before melting for [Li⁺-EC](AlH₄)^– withEC=12-C-4 and 15-C-5. They are probably explained by small molecular modifications strongly dependent on the thermal history of the sample. A glass-transition was found for the pure crown-ether DC 18-C-6anti, the complex [Li⁺-EC](A1H₄)^– withEC=DC-18-C-6anti and the two solvates mentioned above.