Recent advances and challenges in materials for 3D bioprinting

3D bioprinting has been developed as a promising technology in a wide variety of biomedical applications. However, the successful implementation of bioprinting is still heavily restricted by the relatively narrow range of printable and biocompatible materials. Recently, many comprehensive reviews of the main bioprinting methods, commonly used bioprinting materials and the trending bioprinting applications have been carried out. In this review, we focused on the trends in the development of materials for 3D bioprinting. The significance and recent advances of ECM-based materials, multi-material and stimuli-responsive materials for bioprinting were summarized successively. Moreover, the challenges in current studies and future perspectives of materials for 3D bioprinting were discussed.     

木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

Synthesis and properties of the nanocomposite of zink oxide and poly(amic acid)

The composite comprised of zinc oxide quantum dots and poly(amic acid) (PAAc) was prepared and studied by X-rays diffraction, X-ray photoelectron spectroscopy, light scattering, UV absorbance and UV fluorescence. The UV absorbance of the ZnO/PAAc composite was found to be much larger than that of its components taken separately. The fluorescence of the ZnO/PAAc composite was found to be shifted to longer wavelengthes in comparison with pure ZnO. The presence of the dopant dodecylbenzenesulfonic acid was found to affect the observed fluorescence.     

钢-混凝土连续组合梁桥的理论分析和试验研究

根据完全剪力连接的连续组合梁桥的构造特点及各部分受力机理,做出合理假设,提出分层平面框架计算模型该计算模型用于沈阳市东西快速干道工程某段连续组合梁桥,计算值与静载试验实测值非常接近,证明了本计算模型用于钢-混凝土连续组合梁桥正确实用的.     

Microstructure and high-temperature wear resistance of a laser surface alloyed γ-TiAl with carbon

TiC reinforced composite coating on γ-TiAl alloy was successfully fabricated by laser surface alloying with carbon. The fine TiC reinforcing phase had a gradient distribution in the coating, and its growth morphology of TiC in laser surface alloyed coating was in unique faceted platelet-like. The composite coating exhibited high hardness and excellent high-temperature sliding wear resistance.     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。     

用测量模态阻尼和振型的方法对复合材料薄平板进行无损质量检测

复合材料薄平板经热压制成后,都需要进行质量检测。本文探索用测量模态阻尼和振型的方法,对复合材料薄平板的制作质量进行无损检测,作为对其它昂贵的无损检测方法的补充。略述用振动方法进行无损检测的原理,测量薄平板阻尼的方法以及提高测量精度的措施。还讨论在测量薄平板阻尼时可能遇到的一些特殊问题(如非线性刚度、拍、模态密集等问题);以云母基复合材料薄平板作为例子,从测量其阻尼和振型的结果,对这种板的制作质量进行讨论。     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray

The combination of the optical diagnostics and image processing technique has produced various methods of practical measurement in engineering. The measurement of size and velocity of droplets in fuel spray is one typical example. In general, the spray is a complicated and three-dimensional two-phase flow; therefore multi-dimensional field measurement of the spray field is indispensable. In the present paper, a technique of simultaneous measurement of droplet size and three-components of velocity is proposed and applied to spray issuing from the swirl nozzle as a practical application. The focused image of glare points is captured by a stereoscopic arrangement, and droplet size and the three-components of velocity are evaluated from the doublet image. Fundamental optical arrangements to capture the image of the glare points with a stereo view are established, and the feasibility and the accuracy of the technique are confirmed. © 2004 The Optical Society of Japan     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003