Large deviations for martingales with some applications

Let(X _i ) be a martingale difference sequence. LetY be a standard normal random variable. We investigate the rate of uniform convergence

Ultrasonic-assisted magnetic solid phase extraction of morphine in urine samples by new imprinted polymer-supported on MWCNT-Fe3O4-NPs: Central composite design optimization

Multiwalled carbon nanotubes (MWCNTs) were magnetized with Fe₃O₄ nanoparticles (MWCNTs-Fe₃O₄-NPs) and subsequently coated by vinyl end groups (Vinyltrimethoxysilane). MWCNT-Fe₃O₄-NPs were used as support for a new morphine (MO) molecularly imprinted polymer (MWCNT-Fe₃O₄-NPs@MO-MIP) by surface imprinting polymerization method. The MWCNT-Fe₃O₄-NPs@MO-MIP was characterized by FTIR, VSM and SEM techniques and successfully used for determination of MO. Ultrasonic-assisted magnetic solid phase extraction followed by UV–vis spectrophotometer (UAMSPE-UV–vis) was investigated for MWCNT-Fe₃O₄-NPs@MO-MIP and compared with non-imprinted polymer (NIP) using batch method. Central composite design under response surface methodology was used for the evaluation of the effect of variables, individually, as well as their possible interaction effects on the adsorption process. The variables such as sonication time, MWCNT-Fe₃O₄-NPs@MO-MIP mass, initial concentration of MO and pH were investigated in this study. At optimum experimental conditions, UAMSPE-UV–vis method was exhibited a linear range of 0.8–8.7 mg L⁻¹ of the MO concentration with a detection limit of 0.18 mg L⁻¹. The relative standard deviation for the analyte was found to be lower than 2.32%. The MWCNT-Fe₃O₄-NPs@MO-MIP adsorption capacity was found to be 37.01 mg g⁻¹. The enrichment and preconcentration factors were found to be 107.01 and 98.21, respectively. The developed method was finally applied successfully to the determination of MO in urine and wastewater samples with the recoveries ranged from 96.40 to 105.6%.     

Distributions in fuzzy logic

Probability distributions associated with several ‘ply’-operators are discussed. These exact distributions are compared with relevant Gaussian approximations.     

甘肃天祝县夏玛林区的蝶类

记述天祝县夏玛林区的蝶类３６种,隶属于６科２１属,其中４科５种为甘肃省新记录。     

Determination of nickel in standard rocks and glasses by photon activation analysis with 30-MeV bremsstrahlung

The determination of nickel in various silicate rocks and glasses by photon activation analysis with a linear electron accelerator is described. Simultaneous irradiation of the sample and comparative standards produces the ⁵⁸Ni(γ, n)⁵⁷Ni reaction, and a post-irradiation chemical separation is used in conjunction with Ge(Li) γ-spectrometry. Nickel abundances for ten standard silicate rocks and two elementally doped glasses are presented and compared with the data previously published. The method is quite simple and gives good reproducible results for nickel down to sub-p.p.m. levels.     

Crystal structure and magnetic structure of TbOOH

The monoclinic modification of terbium oxide hydroxide, TbOOH, was prepared using hydrothermal technique. The crystal structure was investigated by three-dimensional single-crystal X-ray analysis and was refined to a conventional R-value of 8.1%. The space group is $\text{P2}{}_1\text{m}$, No. 11, with a = 6.04 Å, b = 3.69 Å, c = 4.33 Å, and β = 109.0°. The terbium atom is seven coordinated with oxygen atoms, and the structure is not hydrogen bonded.The compound is antiferromagnetic with a Néel temperature of 10°K. Neutron diffraction powder patterns were measured at 300°K and 4.2°K. The magnetic super lattice reflections were indexed on the basis of a monoclinic unit cell with the dimensions a_M = 2a, b_M = b, c_M = c, and β_M = β, where a, b, c, and β are the dimensions of the chemical unit cell. The structure contains two independent magnetic atoms. A nonclinear antiferromagnetic arrangement of the spins describes the magnetic structure. The spin at one atom has an angle of 43° with the ac plane and the projection of the spin on the ac plane has an angle of 59° with the a axis. The spin on the other atom has an angle of ?43° with the ac plane, the projection having the same angle of 59° with the a axis.     

Effect of Polyethylene glycol methyl ether blend Humic acid on poly (vinylidene fluoride-co-hexafluropropylene) PVDF-HFP membranes: pH responsiveness and antifouling behavior with optimization approach

Flat sheet asymmetric membranes were fabricated with homogeneous solution of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) using N-methyl-2-pyrrolidone (NMP) as solvent via phase inversion method. PEGME (Poly ethylene glycol methyl ether) (M_n 5000) blend Humic Acid (HA), of different mole ratio was used as additive. Characterization of the membranes was done by Field emission scanning electron microscope (FESEM), Fourier Transform Infrared (FTIR) spectroscopy, Atomic force microscopy (AFM) and Differential scanning calorimetry (DSC) studies. Liquid-liquid displacement porosimetry (LLDP) study evaluated the morphological parameters, average pore size and pore size distribution. Bovine serum albumin (BSA) (M_W - 68,000 Da) was used to study the antifouling effect and pore blocking mechanism of the membranes. The pure water flux (PWF), solute rejection and flux recovery ratio drastically increases for the PEGME blended HA membranes whereas the water contact angle decreases significantly. The pH responsiveness character of the prepared membranes altered the hydraulic permeability and rejection % at different pH. Finally, optimization of the variables contributing towards the PWF and BSA rejection of the desired membrane was performed using Design expert software 9.0 TRIAL through ANOVA (analysis of variance) using the combination of response surface methodology (RSM) and central composite design (CCD).     

Determination of Occurrence Characteristics of Heavy Metals in Soil and Water Environments in Tianshan Mountains,Central Asia

China has one of the fastest-growing economies in the world, but this economic development has important implications for environmental changes in this country. Our research was to quantify the presence of heavy metals in soil and water environments in the Tianshan Mountains region of China, associated with the economic development of this region. We used anomaly analysis, correlation analysis, and principal component analysis to assess the occurrence characteristics of heavy metals in this area. Results showed that Co, Cr, As, and Ni are more prevalent in water environments than in soil environments; in contrast, Cd, Zn, Pb, Hg, and Mn are more prevalent in soil samples than in water samples. This analysis grouped 10 heavy metals in soil and water environments into three principal components. In soil environments, the prevalence order was Co, Ni, Cr, As > Mn, Zn, Pb > Hg, Cd, Cu. In water environments, the order was Cu, Co, Ni, Cr, As > Hg, Mn, Zn > Cd, Pb. It is possible to distinguish between the natural and the anthropogenic sources of heavy metals in the Tianshan Mountains. With the current rapid economic development in the Tianshan Mountains, anthropogenic sources are playing principal roles in serious heavy metal accumulations in this region. This problem warrants immediate and widespread attention to prevent further deterioration of the soil and water environments.     

Pressurised hot water extraction followed by simultaneous derivatization and headspace solid-phase microextraction and gas chromatography-tandem mass spectrometry for the determination of aliphatic primary amines in sewage sludge

In this paper we describe an environmentally friendly and sensitive method for the determination of ten primary amines in sewage sludge. The method is based on pressurised hot water extraction (PHWE) followed by simultaneous derivatization with pentafluorobenzaldehyde (PFBAY) and headspace solid-phase microextraction (HS-SPME) and subsequent gas-chromatography ion-trap tandem mass spectrometry (GC-IT-MS-MS) analysis. The influence of the main factors on the PHWE of sludge was optimized by a central composite design. For all species the optimal conditions were water at pH 4 as the extracting solvent, an extraction temperature of 100 °C and an extraction time of 15 min. The separation and detection of the ten amines by GC-IT-MS-MS took just 10 min and the entire process took approximately 1 h. Repeatability and reproducibility between days, expressed as RSD (%) (n = 5), were less than 19 and 24%, respectively. The average limit of detection (LOD) was of 65 μg kg⁻¹ s (range found 9-135) and the average limit of quantification (LOQ) was of 230 μg kg⁻¹ (range found 50-450) of dry weight (d.w.). Under optimized conditions we used this method to determine the compounds in industrial and municipal sewage sludge samples and in sludge from a potable water treatment plant. Methylamine and isobutylamine showed the highest levels in one of the industrial sewage sludge samples (404 and 543 mg kg⁻¹ (d.w.), respectively). To our knowledge, this paper presents for the first time the determination of ten primary amines in sewage sludge samples using PHWE.