基于培养卓越应用型人才的线性代数问题驱动与案例任务教学模式改革

本文分析了现行线性代数的教学问题,提出了问题驱动与案例任务相结合的教学模式,并以两个案例来说明了此种教学模式的优越性,培养了学生的应用和创新能力,提高了学生的学习兴趣与课堂教学质量.     

A subdomain boundary element method for high‐Reynolds laminar flow using stream function‐vorticity formulation

The paper presents a new formulation of the integral boundary element method (BEM) using subdomain technique. A continuous approximation of the function and the function derivative in the direction normal to the boundary element (further ‘normal flux’) is introduced for solving the general form of a parabolic diffusion‐convective equation. Double nodes for normal flux approximation are used. The gradient continuity is required at the interior subdomain corners where compatibility and equilibrium interface conditions are prescribed. The obtained system matrix with more equations than unknowns is solved using the fast iterative linear least squares based solver. The robustness and stability of the developed formulation is shown on the cases of a backward‐facing step flow and a square‐driven cavity flow up to the Reynolds number value 50 000. Copyright © 2004 John Wiley & Sons, Ltd.     

锤击沉管灌注桩施工时应注意的几个问题

锤击沉管灌注桩应用非常广泛.从桩位的确定、沉管深度、混凝土质量、钢筋笼振入长度、桩身混凝土凿除等几个方面,提出了提高锤击管灌注桩施工质量的一些建议.     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

双核系统核子转移驱动势与复合核的最佳激发能

计算了以208Pb为靶的一系列重离子熔合反应双核系统核子转移驱动势.它制约由输运方程所支配的核子转移速率,因而确定了双核系统形成复合核的几率.并由此可确定形成复合核所必须的最低激发能,即形成最稳定复合核的最佳激发能,得到了与已知实验值基本符合的结果. Particle transfer driven potentials in Di nuclear System (DNS) in heavy ion collisions based on 208Pb target are calculated. The driven potential controls the particle transfer velocity in the process governed by the diffusion equation, and as a consequence determines the compound nuclear formation probability of DNS. The minimum excitation energy to form a compound nucleus, which is the optimum excitation energy to form the most stable compound nucleus, has been calculated, and the results are basica...     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.     

综合网管中基于模型驱动的元数据管理

提出了一种基于模型驱动的元数据管理方案．方案采用了基于模型的形式化描述方法，统一了专业网管子系统间的元数据模式；通过引入模型驱动技术，从元模型的抽象层次消除了不同专业网管子系统之间存在的“信息孤岛”；方案还对综合网管环境下的元数据理论和交换机制进行了研究，并给出了元数据的管理框架以及元数据交换的Java接口映射．     

Tunnelling in periodically driven systems

Tunnelling in periodically driven bistable symmetric potential wells is investigated in an analytical approximation in a domain where the driving frequency is large compared to the tunnelling frequency and only the four lowest lying levels contribute significantly. The influence of finite level widths is taken into account, and a smooth variation of the amplitude of the driving field is allowed for.     

基于MDA实现前台控制器模式的Web安全

基于前台控制器的模式原理，讨论了采用MDA方式实现该模式的Web安全问题，介绍了2个Web安全集成的元模型：Accessor和SecureUML。     

Analysis and finite element simulations of a second‐order fluid model in a bounded domain

This article is concerned with the equations governing the steady motion of a viscoelastic incompressible second‐order fluid in a bounded domain. A new proof of existence and uniqueness of strong solutions is given. In addition, using appropriate finite element methods to approximate a coupled equivalent problem, sharp error estimates are obtained using a fixed point argument. The method is applied to the two‐dimensional lid‐driven cavity problem, at low Reynolds number and in a certain range of values of the viscoelastic parameters, to analyze the combined effects of inertia and viscoelasticity on the flow. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007