枯草杆菌AS1．398制备中性蛋白酶的研究

本文研究了枯草杆菌ＡＳ１．３９８发酵培养制备中性蛋白酶，对发酵培养基配比，培养条件，金属离子的影响等进行了摇瓶试验。制备的ＡＳ１．３９８中性蛋白酶有如下性质：最适ＰＨ７．２－７．４，在ＰＨ６．５－８．０稳定。最适温度４２－４４℃，３５℃下处理２小时能保持约８５％酶活力，６０℃下１０分钟酶完全失活，此酶被ＥＤＴＡ和Ｃｕ２＋所抑制     

苏云金杆菌库斯塔变种(HD-1)对菜青虫杀虫效果的研究

通过实验室饲料感染方法和大田喷杀对比试验研究，表明发酵培养基中添加花生饼可以提高HD—1的杀虫效果，且添加浓度与HD—1菌株毒力呈正相关，用添加了花生饼的固体浅盘发酵培养液比市售工业化生产的同类杀虫剂杀虫效果要高得多。     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Overproduction of riboflavin by anArthrobacter sp. mutant resistant to 5-fluorouracil

Effects of pH and dissolved oxygen concentration on batchwise riboflavin production by a 5-fluorouracil (5-FU)-resistant mutant ofArthrobacter sp. were investigated. The reaction was carried out in a jar fermentor. The optimal pH of culture medium was around 7.3. Dissolved oxygen concentration was almost constant during fermentation at 600 rpm of agitation rate. Production of riboflavin reached a maximum of 160 mg/L after 70 h fermentation under the agitation rate of 600 rpm, aeration rate of 1.0 L/min, and pH 7.0.     

The utility of Bacillus subtilis as a bioflocculant for fine coal

The application of Bacillus subtilis as a flocculant for fine coal has been reported here. Zeta-potential measurements showed that both the coal and bacteria had similar surface charge as a function of pH. Surface free energy calculations showed that the coal was hydrophobic while the bacterium was hydrophilic. The adhesion of the bacteria to coal and subsequent settling was studied in detail. Adhesion of bacteria to coal surface and subsequent settling of coal was found to be quick. Both adhesion and settling were found to be independent of pH, which makes the process very attractive for field applications. The presence of an electrolyte along with the bacterium was found to not only enhance adhesion of bacteria, but also produce a clear supernatant. Further, the settled fraction was more compact than with bacteria alone. Interaction energy calculations using the extended DLVO theory showed that the electrical forces along with the acid–base interaction energy play a dominant role in the lower pH range. Above pH 7, the acid–base interaction energy is the predominant attractive force and is sufficient enough to overcome the repulsive forces due to electrical charges to bring about adhesion and thus settling of fine coal. With increase in electrolyte concentration, the change in total interaction energy with pH is minimal which probably leads to better adhesion and hence settling.     

Inoculum studies in production of penicillin g acylase by Bacillus megaterium ATCC 14945

This article reports studies concerning the production of penicillin G acylase (PGA) by Bacillus megaterium. This enzyme has industrial use in the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid, an essential intermediate for the production of semisynthetic β-lactam antibiotics. Although most microorganisms produce the enzyme intracellularly, B. megaterium provides extracellular PGA. The enzyme production by microorganisms involves several steps, resulting in a many operational variables to be studied. The study of the inoculum is an important step to be accomplished, before addressing other issues such as culture optimization and downstream processing. In this study, using a standard inoculum as reference, several runs were performed aiming at the definition of operational conditions in the PGA production. Cell concentration and PGA activity in the production medium were measured after 24, 48, and 72 h of the beginning of the production phase. This study encompasses the duration of the inoculum germination phase and the concentration of cells used to startup the germination. Based on these results, PGA productivity during the production phase was maximized. The selected values for these variables were 1.5 × 10⁷ spores/mL of germination medium, germination during 24 h, and 72 h for the production phase.     

Characteristics and production of thermostable α-amylase

Thermostable α-amylases have application in a variety of industrial processes and enzymes from a substantial number of thermophilic bacteria and fungi have been screened and characterized to varying degrees. The characteristics of these enzymes are summarized in this review. The genetics of α-amylase production inBacillus subtilis is reviewed and classical and recombinant DNA approaches to increasing α-amylase production are discussed.     

Structural characterization of lipopeptide biomarkers isolated from Bacillus globigii

Spectra obtained using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry of Bacillus globigii (Bacillus subtilis niger) spores, vegetative cells and the culture supernatant show a cluster of biomarkers centered at a molecular mass of 1478 Da. Three biomarkers were isolated from the cell-free culture supernatant by solid-phase extraction and reversed-phase high-performance liquid chromatography, and characterized using various kinds of mass spectrometry. A Fourier transform mass spectrometer with a MALDI source was used to determine the monoisotopic protonated masses at 1463.8, 1477.8, and 1505.8 Da in order of elution. The mass differences of 14 and 28 Da suggest that they are homologous molecules. Alkaline hydrolysis of each species showed that it contained a lactone linkage. Strong acid hydrolysis released a fatty acid from an amide bond, consistent with a lipopeptide. A quadrupole time-of-flight instrument with a nanospray source was used to sequence the hydrolyzed forms of the three biomarkers. The cyclic lipopeptides were found to have amino acid sequences identical with those in fengycins and plipastatins, antimicrobial compounds with phospholipase inhibitor activity, previously identified in related species of Bacillus subtilis and Bacillus cereus.     

Isolation and characterization of thermophilic benzothiophene-degrading Mycobacterium sp.

A bacterial strain, SWU-4, capable of using benzothiophene (BT) as a sole carbon and energy source was isolated from a petroleum-contaminated site in Thailand and identified by 16S rRNA gene sequence analysis to be in the genus of Mycobacterium. The strain was Gram-positive, nonspore former, and grew at 50° C. Colonies of the strain on nutrient agar were rod-shaped, smooth with a convex surface, slightly mucoid, and yellow pigmented. The thermophilic Mycobacterium sp. strain SWU-4 rapidly degraded 2% (w/v) BT at 50°C. Interestingly, this strain was able to degrade a wide variety of organosulfur compounds including thiophene, bromo(α)thiophene, and 3-methylthiophene in liquid minimum medium at 50°C, which will be beneficial for industrial applications.     

The effect of composition of parenteral solution on the thermal resistance of Bacillus stearothermophilus and Bacillus subtilis spores

Large-volume parenteral solutions were submitted to heat treatments after being inoculated with Bacillus stearothermophilus ATCC 7953 (T _r =121°C) and Bacillus subtilis ATCC 9372 (T _r =104.5°C) spores. The average decimal reduction time for B. stearothermophilus ranged from a D _121°C value of 1.31 to 3.14 min, in glucophysiologic and Ringer’s solutions respectively. For B. subtilis, D _104.5°C value increased from 0.69 to 1.37 min, in Ringer’s (pH=5.91) and 50% glucose (pH 3.05) solutions respectively. The z value ranged from 7.95°C (20% mannitol solution) to 13.14°C (50% glucose solution), corresponding to an activation energy (Ea) of 81.48 and 49.30 kcal/mol, respectively.