浅谈铁和碱反应

文献［１～６］报道：“铁同强碱不发生作用”．我们用干燥的铁粉和氢氧化钠进行实验．实验证明：铁能跟强碱反应，反应的化学方程式为     

胆绿素及其铜配合物的表面增强拉曼光谱研究

本文研究了胆绿素的表面增强拉曼光谱。结果表明，在溶液酸度不同时，拉曼光谱特征频率的变化表现出胆绿素的质子化。铜离子与胆绿素的相互作用实验结果说明金属铜离子可与胆绿素生成金属配合物。     

Phasenbeziehungen und Natriumionenleitung im quasi-binären System Na2SiF6/Na3AlF6

Phase Relations and Sodium Ion Conductivity within the Quasi-binary System Na₂SiF₆/Na₂AIF₆ . The phase diagram of the Na₂SiF₆/Na₃AlF₆ system has been determined by means of x-ray powder diffraction, thermal analysis and conductivity measurements in the sub-solidus region. Na₃AlF₆ accomodates up to 73 mol.-% Na₂SiF₆ maintaining the crystal structure type. The sodium ion conductivity increases by about five orders of magnitude upon doping Na₃AlF₆ with Na₂SiF₆.     

识别过渡金属离子的1,8-萘二甲酰亚胺多胺衍生物荧光传感器的研究

设计合成了用以检测过渡金属离子的荧光化学敏感器体系,它们是由1,8-萘二酰亚胺为荧光团,多胺衍生物为金属离子受体组成．在室温下对其光物理性质的研究中发现,在没有加入过渡金属离子时,由于体系内存在有效的光诱导电子转移过程使得荧光团的荧光被淬灭．加入过渡金属离子后,金属离子受体中的氮原子和过渡金属离子之间的配位作用阻断了光诱导电子转移过程,体系的荧光增强．不同的金属离子受体表现出了和过渡金属离子不同的配位识别能力,并且通过荧光的变化传递出受体-金属离子作用的信息．     

The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

V20+离子1s23d-1s2nf的跃迁能和振子强

用全实加关联方法计算了类锂V20+离子1s23d-1s2nf的跃迁能和偶极振子强度.依据量子亏损理论, 确定了1s2nf系列的量子数亏损,用这些作为能量的缓变函数的量子亏损,实现对该Rydberg系列任意高激发态(n≥10)的能量的可靠预言.将这些分立态振子强度与量子亏损理论相结合,得到在电离域附近束缚态间的偶极跃迁振子强度以及束缚态-连续态跃迁的振子强度密度,从而将V20+离子的这一重要光谱特性的理论预言外推到整个能域.     

几率量子隐形传态的离子阱方案

本文提出了一个在分别囚禁于不同离子阱中的两个离子间实现几率量子隐形传态的简单方案,Alice对离子1和离子2的内态进行联合测量并通过经典通道告诉Bob测量结果,Bob利用一束经典驻波场激光与离子3相互作用并控制相互作用的时间就能够在离子3上最佳几率地重现离子1的初始内态.     

离子阱中热库诱导退相干的控制

对单个囚禁离子在热库作用下的退相干的控制问题进行了研究.本文提出的控制方法是基于消除自由哈密顿技术和脉冲重聚技术的结合.前者是利用一个经典大失谐激光场作用于囚禁离子来实现的,而后者是利用一系列的激光π脉冲来实现的.解析与数值表明,应用这种控制方法可以有效消除量子退相干且比纯粹应用脉冲重聚技术要好.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

气相Lys分子体系捕获双电子单重激发态的特性

采用密度泛函理论（DFT）中的B3LYP方法, 在6-311+G(2df)基组水平上, 对气相赖氨酸（Lys）分子和Lys^2-的基态稳定构型进行优化, 并用含时密度泛函理论（TD DFT)方法考察气相Lys分子和带电离子体系单重激发态的特性. 结果表明： Lys分子体系捕获双电子时, 其体系能量有所增加； S1单重激发态与S0基态能量差值变小； 分子体系的荧光波长增加； S7单重激发态跃迁轨道数减少.