轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

Convergence of solutions for the fractional Cahn–Hilliard system

This paper deals with the Cauchy–Dirichlet problem for the fractional Cahn–Hilliard equation. The main results consist of global (in time) existence of weak solutions, characterization of parabolic smoothing effects (implying under proper condition eventual boundedness of trajectories), and convergence of each solution to a (single) equilibrium. In particular, to prove the convergence result, a variant of the so-called ?ojasiewicz–Simon inequality is provided for the fractional Dirichlet Laplacian and (possibly) non-analytic (but $C^1$) nonlinearities.     

冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

碳钢在NaHCO3+NaCl溶液中的亚稳态孔蚀特征

用动电位极化和恒电位极化法研究了A3碳钢在不同浓度NaCl的0.5mol/LNaHCO₃溶液中亚稳态孔蚀行为。实验发现亚稳态电流波动峰具有快速上升、缓慢下降的特点。亚稳孔出现电位E_m 服从正态分布,随着Cl^-浓度的提高,E_m 值向负方向移动。亚稳孔的峰频变化规律与电位关系不大。恒电位极化时,当电位高于E_m而大大低于孔蚀电位E_b 时,电流波动保持一定时间后会最终消失,并产生直径为微米级的小蚀孔。当电位接近孔蚀电位时,一段时间的电流波动后电流往往迅速上升,最终转变为稳定蚀孔.     

矩形型钢弯曲回弹曲率半径r值的确定

文章在分析矩形型钢弯曲变形过程及应力与应变等方面的关系的基础上，推导出工件曲率半径与工件回弹后曲率半径之间的关系，从而确定了凸模半径。     

Optimal tristance anticodes in certain graphs

For z₁,z₂,z₃∈Zⁿ, the tristance d₃(z₁,z₂,z₃) is a generalization of the L₁-distance on Zⁿ to a quantity that reflects the relative dispersion of three points rather than two. A tristance anticodeA_d of diameter d is a subset of Zⁿ with the property that d₃(z₁,z₂,z₃)?d for all z₁,z₂,z₃∈A_d. An anticode is optimal if it has the largest possible cardinality for its diameter d. We determine the cardinality and completely classify the optimal tristance anticodes in Z² for all diameters d?1. We then generalize this result to two related distance models: a different distance structure on Z² where d(z₁,z₂)=1 if z₁,z₂ are adjacent either horizontally, vertically, or diagonally, and the distance structure obtained when Z² is replaced by the hexagonal lattice A₂. We also investigate optimal tristance anticodes in Z³ and optimal quadristance anticodes in Z², and provide bounds on their cardinality. We conclude with a brief discussion of the applications of our results to multi-dimensional interleaving schemes and to connectivity loci in the game of Go.     

Global stability of the Armstrong-Frederick model with periodic biaxial inputs

The paper is concerned with the study of plasticity models described by differential equations with stop and play operators. We suggest sufficient conditions for the global stability of a unique periodic solution for the scalar models and for the vector models with biaxial inputs of a particular form, namely the sum of a uniaxial function and a constant term. For another class of simple biaxial inputs, we present an example of the existence of unstable periodic solutions. The paper was written during the research stay of D. Rachinskii at the Technical University Munich supported by the research fellowship from the Alexander von Humboldt Foundation. His work was partially supported by the Russian Science Support Foundation, Russian Foundation for Basic Research (Grant No. 01-01-00146, 03-01-00258), and the Grants of the President of Russia (Grant No. MD-87.2003.01, NS-1532.2003.1). The support is gratefully acknowledged.     

On the realization of Riemannian symmetric spaces in Lie groups

In this paper we give a realization of some symmetric space G/K as a closed submanifold P of G. We also give several equivalent representations of the submanifold P. Some properties of the set gK∩P are also discussed, where gK is a coset space in G.