The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

ZrO2纳米粉等离子喷涂层组织与性能

用纳米结构粉末做喂料进行喷涂，缩短了颗粒熔化时间，在有限的飞行时间内，颗粒熔化效果更好，从而制备的涂层孔隙率更小，表面更平整。用ZrO2纳米结构喂料制备了等离子喷涂层，研究了功率、粒度、氧化钇含量等工艺参数条件下涂层的微观组织、孔隙率、相组成及抗热震性能。经X衍射分析表明，原始粉末由m-ZrO2,t-ZrO2,c-ZrO2构成，单斜相的含量为11％，主要由四方相和立方相构成。     

华东连线

上海：亚洲最大太阳能发电站将落户，上海：资助大学生进行创业信息科技成首选,浙江：富阳太阳能路灯创全国第一,江苏：南京骨干软件企业在伦敦实现成功上市,江苏：等离子技术成果在南京转化     

Relativistic Electromagnetic Solitary Wave in a Cylindrical Magnetized Plasma

In the presence of an applied static and uniform magnetic field, a cylindrical Kadomtsev-Petviashivili equation is derived for a relativistic electromagnetic solitary wave propagating in collisionless plasma consisting electrons, positrons, and ions in the case of weak relativistic limit. This equation is solved in a stationary frame to obtain explicit expression for the velocity, amplitude and width of solitons. The amplitude of the solitary wave has a maximum value at a critical αc of the ratio of the ion equilibrium density to the electron one, and it increases as the applied magnetic field becomes larger.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。     

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.     

等离子喷涂Al2O3涂层内粒子间结合的研究

论述了通过对等离子喷涂Ａｌ２Ｏ３涂层内电镀铜，利用镀入的铜在涂层断面上的分布，定量地测定涂层内粒子间结合的方法及结果。结果表明，粒子间最大的平均结合率占所有界面的３２％。这种有限的结合被认炎是受熔化粒子的温度及熔滴与涂层的作用时间影响所致。     

基于PLC实现等离子弧喷涂电流调节

在等离子弧喷涂过程中,要求电流在喷涂开始时有递增和结束后有衰减的过程.在以可编程控制器为核心的喷涂主控系统里,通过模拟量输入输出模块EM235和CF2B-2A型可控硅触发器及辅助电路,利用PLC程序实现了喷涂电流的递增、衰减过程.