疏水色谱法及其在生物大分子分离纯化中的应用

综合评述了疏水相互作用色谱法（hydrophobic interaction chromatography,HIC)的理论及其在生物大分子分离纯化方面的研究进展。     

Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)     

论疏水相互作用的生物学意义

本文用热力学和非平衡态热力学观点探讨了疏水相互作用的本质及特征，进而阐明其重要的生物学意义：维系生命系统结构、驱动有序化过程．     

疏水吸附法分离纯化α—淀粉酶

本文报道了一种从发酵液中分离纯化α—淀粉酶的新方法。α—淀粉酶发酵液用两种高分子量的絮凝剂澄清,滤液用一种国产吸附树脂吸附,然后用40％乙醇洗脱,所得酶粉的活性约为60000U/g。产率64.22％。     

单涂层吸波材料的优化设计及偏差研究

本文通过对单涂层吸波材料内电磁波传输损耗机理的细致研究，提出了单涂层吸波材料优化设计的两项原则。结合具体实例详细说明这两项原则的具体应用，最后讨论涂层电磁参量在偏离匹配条件的情况下，对涂层吸波性能影响的具体结果分析。图３．表１，参３。     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

离子束辅助沉积多层复合Cr／CrN涂层改善W9Cr4V2Mo轴承钢耐磨性和耐腐蚀性研究

由于具有良好的耐磨、抗腐蚀性以及高氧化性，目前，CrN涂层被证明是提高轴承寿命的最佳方法之一。然而随着机械器件工作环境恶劣程度的增加，单一的涂层已不能满足一些特殊的要求，尤其对于轴承，更需要寻求一种新的涂层技术来进一步提高其耐磨性、耐腐蚀性等特性。90年代以来，多层复合技术的应用受到了极大的重视。     

热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。