溶胶-凝胶制备技术与新型催化材料Ⅲ.溶胶粒子表面修饰方法制备催化膜

提出用溶胶粒子表面修饰方法，结合溶胶凝胶技术制备无机催化膜．该方法的基本原理是利用合适的金属配合物在胶粒表面的吸附作用，经溶胶凝胶过程，将活性组分结合到无机膜中．实验测定结果表明：（ＮｉＥＤＴＡ）２－，ＶＯ－３，ＭｏＯ２－４，（Ｐｄ（ＮＨ３）４）２＋，ＰｄＣｌ２－４，ＰｔＣｌ２－６和ＲｈＣｌ３－６可用来修饰ＡｌＯＯＨ溶胶．以Ｐｄ／γＡｌ２Ｏ３催化膜的制备为例，经三次溶胶凝胶过程，可制得无裂缺的厚度为９μｍ的Ｐｄ／γＡｌ２Ｏ３催化膜，膜材料的平均孔直径为６ｎｍ，Ｐｄ被均匀地分布在膜的顶层，其平均粒径为２３ｎｍ．     

基片温度和退火对DdIn2O4薄膜光学性质和载流子浓度的影响

对射频反应性溅射Cd-In合金靶制备的透明导电CdIn2O4薄膜，研究了基片温度及沉积后在氩气流中退火对薄膜的透射、反射和吸收光谱，光学常数和载流子浓度的影响。结果表明：提高基片温度减少了薄膜的载流子浓度，退火增加了薄膜的载流子浓度。随着基片温度提高，薄膜折射率n和消光系数κ的短波峰将逐渐蓝移，而退火使其出现红移。基片温度和退火对薄膜光学常数的影响与其对薄膜载流子浓度的影响是一致的。在制备CdIn2O4这样一种对于沉积方法和沉积条件极为敏感的透明导电薄膜的沉积过程中，这一现象对于实时监控具有极为重要的意义。     

平果铝高压溶出过程结疤形成影响因素探索

平果铝高压溶出过程，结疤的形成是不可避免的，而且对生产带来的危害也很大。对结疤形成影响因素的研究，对于生产中结疤的治理，强化氧化铝生产具有十分重要的意义。     

Longitudinal leaky surface acoustic wave on Y-rotated cut quartz substrates

The properties of Quasi-longitudinal leaky surface acoustic wave(QLLSAW) on Y-rotated cut quartz substrates were presented. The phase velocity of QLLSAW on the quartz substrate along some orientations can be up from 6200 m/s to 7100 m/s, circa 100% above that of regular SAW. Both theoretical and experimental results show that QLLSAW propagating along some promising orientations for SAW devices are of small power flow angle and low tem-perature coefficient, for example, along the Euler angle (0°155.25°? 42°?, the measurements of phase velocity and temperature coefficient of delay of QLLSAW are 6201 m/s and 12.9 ppm/℃. The experimental results show that QLLSAW had little absorption by liquid loading on the substrate surface, which proved that the direction of particle motion is the same as wave vector and parallel to the surface of the substrates, i.e., the wave is of the properties of longitudinal wave.     

二次阳极氧化方法制备有序多孔氧化铝膜

通过二次阳极氧化方法制备多孔氧化铝膜与一次阳极氧化方法制备多孔氧化铝膜孔排布规律性的对比 ,结果发现 ,二次阳极氧化方法制取的多孔氧化铝膜孔排布规律性明显好于一次阳极氧化法制取的多孔膜 .在几个微米范围内 ,孔呈理想的六角排布 .去除一次阳极氧化膜后 ,二次阳极氧化得以在更良好的表面进行 ,制取的氧化铝膜孔规律性和有序度更高 .有序区域的尺寸与晶粒内的亚晶大小有一定关系     

Microwave-assisted Regioselective 1-O-Deacylation of Peracylated Glycopyranoses on Alumina

A facile, rapid and regioselective method for the 1-O-deacylation of peracylated glycopyranoses is described which occurs under mild conditions by absorption onto alumina using microwave irradiation.     

Morphology of Platinum Nanowire Array Electrodepostied Within Anodic Aluminium Oxide Template Characterized by Atomic Force Microscopy

Unifrom platinum nanowires were synthesized by electrodepositing the platinum under a very low altering current frequency(20Hz) and increasing voltage(5-15V）in the proes of anodic aluminium oxide(AAO) template. Atomic force microscopy observation indicates that the template membranes we obtained have hexagonally clse-packed nanochannels.The platinum nanowires have highly ordered arrays after partially dissolving the aluminium oxide membrane.With the increasing dissolvoing time,the platinum nanowire array collapsed.A concave topography of the aluminium substrate was observed after the aluminium oxide membrane was dissolved completely and the platinum nanowires were released from the template.Platinum nanowires were also characterized by transmission electron microscopy and the phase structure of the Al/AAO/Pt composite was proven by x-ray diffraction.     

基片温度对坡莫合金薄膜结构和磁电阻的影响

用磁控溅射方法制备了系列坡莫合金Ni80Fe20薄膜。利用X射线衍射、扫描电子显微镜和原子力显徽镜分析了薄膜的结构、晶粒取向、薄膜厚度、截面结构和表面形态。用4点探测技术测量了薄膜的电阻和磁电阻。结果表明：随衬底温度的升高，晶粒明显长大。膜内的缺陷和应力显著减小，而且增强了薄膜晶粒的[111]择优取向。结果表明，薄膜电阻率显著减小，而磁电阻显著增大。