会"飞"的列车

2002年12月31日建成通车的上海磁悬浮列车是世界上第一条投入商业化磁浮示范运营线．从浦东的龙阳路到浦东机场，8分钟就滑过30km的距离，最高时速可达430km／h．     

三苯甲基自由基及其二聚体稳定性的理论研究

采用量子化学AM1 MO方法优化了三苯甲基自由基及其两种二聚体的构型，并计算了反应物和二聚物的生成焓、活化能以及它们的电荷布居，计算结果表明，三苯甲基自由基是一种较稳定的自由基，在这个自由基中存在明显的共轭效应，分子中电子云呈平均化分布．它的二聚体1，4—环己二烯衍生物分子中的5个苯基排布在环己二烯环平面的两端，明显降低了苯基之间的空间排斥力，使二聚物—环己二烯衍生物分子的稳定性大大高于六苯乙烷．因此，三苯甲基自由基的二聚体是1，4—环己二烯衍生物而不是六苯基乙烷，得到了与实验事实一致的结果。     

环氧乙烷四氢呋喃共聚醚[P(E-CO-T)]的研制

研究了环氧乙烷与四氢呋喃的共聚.使用BF_3络合物为催化剂,1,4-丁二醇为共催化剂.找到了溶液聚合和本体聚合适宜的工艺条件.在此条件下,环齐聚物的生成量为8％左右.找到了方便易行的纯化方法,通过纯化可把聚醚的环齐聚物含量降到1％以下,有效地提高了产品的质量。     

等离子体噻吩聚合膜的研究及I+注入的掺杂效应

以噻吩为单体,在等离子体环境中聚合成致密的有机膜。利用Rutherford背散射(RB2S)和质子弹性反冲(ERD)、傅里叶红外谱(FTIR)测定了膜的成分和结构;从近红外-可见-紫外光的反射和透射谱,运用传递矩阵方法研究了膜的光学性质;此外,还探讨了24keV的I⁺离子束的注入对等离子体噻吩聚合膜的掺杂效应。结果表明,注入层内电荷载流子的输运机理可用Mott的可变自由程跳跃(VRH)理论给以解释。 关键词：     

Hydrostatic settling velocity of sediments

The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity, but the explicit relationship between the concentration and settling velocity has not been reported in literature. Here a theoretical function was built for the time dependent concentration and time dependent settling velocity of sediments ; then the entire settling process reflecting concentration was shown on the basis of sediments instant-settlement theory and mathematical method. Agreement of computed results and experimental data was found. Several governing parameters, including particle size,particle density,inltial suspended sediments concentration and suspension height, were discussed with a series of calculated velocity curves. The research indicated that (1) the presented concentration-velocity time relationship is rational, (2) settling process of the sediments group with variation of concentration consists of acceleration stage, uniform motion stage and deceleration stage, and (3) particle size, particle density and initial suspended sediments concentration have more influence on the settling velocity than the suspension height and water temperature.     

聚己二酸单(2-羧苯酚)酯的合成和表征

以己二酸酐和邻羟基苯甲酸为原料，制备了己二酸单（2-羧苯酚）酯，并以它为单体聚合得到了相应的聚酯酸酐．研究了温度、真空度对聚合物分子量的影响，得到了最佳的聚合条件：真空度66．66Pa，聚合温度200℃．在此条件下聚合2．5h，得到的聚己二酸单（2-羧苯酚）酯重均分子量达6498．另外，还对聚合物在不同pH值条件下的体外降解行为进行了研究．     

功能性丙烯酸/MBAM体系共聚产物的研制

以丙烯酸和MBAM为主要原料，经聚合，合成了一种高性能的具有良好保水性能的聚合产物，其保水量达到750～1000倍．50℃以下有良好的保水性能，28℃以下有极好的保水性能，并研究了工艺条件对该产品性能的影响因素．     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.