200MW汽轮发电机组进油问题初析

对国产200MW汽轮发电机组普遍存在的向机内进油及密封油系统运行不稳定等问题进行了较为详细的分析,指出发电机氢侧回油腔窄小,回油不畅,密封瓦及内油挡安装不良;平衡阀灵敏度低,可靠性差;压差阀发卡发涩,跟踪性能差;密封油箱补排油不畅等因素是造成上述问题的主要原因,并提出了相应的改进措施。     

风力发电机组变速恒频控制系统研究

全面介绍了一种最新应用于风力发电中的新型电机—无刷双馈电机，并分析了这种新型电机作变速恒频运行的原理并对这种电机进行了动态特性仿真研究，给出了形式简洁的控制方程和易于实现的控制方案。     

Giant Magneto-Impedance of Co50Ni22Ga28 Alloy with High Chemical Ordering

The microstructure of CosoNi22Ga28 ribbon with the L10 structure is examined. The band-like morphology is observed. These bands with the width in a range of 40-200 nm appear along the transverse direction of the ribbon. The giant magnetoimpedance （GMI） effect in this alloy is measured. The results show that Co5oNi22Ga28 exhibits a sharp peak of the GAI effect. The maximum GAH ratio up to 360% is detected. The GMI effect measured versus temperature shows large jumps of the magnetoimpedance amplitude at the reversal martensitic transformation temperature 240℃ and Curie temperature 375℃C respectively. The jump ratios of the magnetoimpedance amplitude examined at these temperatures are about 5 and 10, respectively.     

High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

自反BCK—代数

本文在BCK-代数中引进稳定子的概念，并定义一类特殊的BCK-代数——自反BCK-代数，证明自反BCK-代数的概念与半单BCK-代数的概念是一致的。同时对于有限BCK-代数还得到它是自反的一个充要条件。     

Fast Theoretical Simulation for Design of Helical Flux Compression Generators

A theoretical scheme is derived to achieve the numerical simulation of helical flux compression generator （HFCG） design, by which not only any physical approximation is not made, but also numerical simulation can be fast obtained. In particular, an analytic formula to calculate the inductance is deduced, which is extremely close to the experimental results. The physical process of relevant interesting physical quantity, such as inductance, enlarging current, and magnetic flux density, can be calculated to compare with the experimentally quantitative results.     

有限元理论在灯泡贯流式水轮机主轴强度分析的应用

贯流式水轮发电机组是水电厂中最重要的动力设备。应用有限元理论和优化设计思想并结合大型工程分析软件进行贯流式水发电机组的设计具有重要的意义。本文运用有限单元法结合大型工程分析软件ANSYS对灯泡贯流式水轮发电机组的关键部件之一主轴进行了静力强度分析。     

三相异步电动机定子绕组重绕实训

高等职业技术教育是职业教育的高等层次。它注重培养生产、建设、管理与社会服务第一线实用型（技术应用或职业）人才。这种教育更强调对职业的针对性和职业技能能力培训。因此。在教学中十分重视理论与实践的有机结合，重视培养动手能力的实训教学。本文就介绍当讲授完《电机及拖动基础》中三相异步电动机（以下简称为电动机）结构、工作原理后进行的28课时的电动机实训教学。具体要求是：将旧的JO2系列小型电动机原绕组拆除，全部换上新绕组（拟用单层链式和单层同心式两种进行重绕实训）。除浸漆、烘干工序工艺外其它工序工艺都要求完成。最后，通电试运行。