盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

CRH380A型动车组转向架检修及分解工艺

介绍了CRH380A型动车组转向架三级检修工作的主要内容，以及三级检修过程中的分解工艺和检修注意事项，为日后检修工作提供必要的理论依据。     

碳钢在NaHCO3+NaCl溶液中的亚稳态孔蚀特征

用动电位极化和恒电位极化法研究了A3碳钢在不同浓度NaCl的0.5mol/LNaHCO₃溶液中亚稳态孔蚀行为。实验发现亚稳态电流波动峰具有快速上升、缓慢下降的特点。亚稳孔出现电位E_m 服从正态分布,随着Cl^-浓度的提高,E_m 值向负方向移动。亚稳孔的峰频变化规律与电位关系不大。恒电位极化时,当电位高于E_m而大大低于孔蚀电位E_b 时,电流波动保持一定时间后会最终消失,并产生直径为微米级的小蚀孔。当电位接近孔蚀电位时,一段时间的电流波动后电流往往迅速上升,最终转变为稳定蚀孔.     

从范德华力理论看Grunwald-Winstein方程中的Y因子

应用范德华力理论,导出了动力学介质效应公式.以叔丁基氯在水—乙醇、水—甲醇、水—二氧六环和水—丙酮体系中的溶剂解反应为研究对象,分析、讨论了Grunwald-Winstein方程中Y因子的具体内容,理论计算的Y值与文献值具有较好的一致性.     

一种高效纯化血清淀粉样物质A(SAA)的方法

通过密度梯度超速离心、脱脂从急性相胸水中分离得到含有血清淀粉样物质A（Serum AmyloidA,SAA）的高密度脂蛋白（HDL），再通过两次Sephacry1S-200层析纯化SAA蛋白。经SDS-PAGE电泳和Western Blotting检验证实得到的SAA蛋白纯度高，可作为抗原免疫动物制备抗体，方法可用于从胸水中大量制备SAA。     

两种方法治疗瘢痕疙瘩114例疗效观察

本文随机分组，对１１４例瘢痕疙瘩患者采用损害内注射确炎舒松－Ａ及皮损冷冻后注射确炎舒松－Ａ的治疗．结果表明．冷冻＋局部注射确炎舒松－Ａ治愈率比单纯局部注射确炎舒松－Ａ高，其总有效率两者无明显差异．     

Recent Experimental Results of HL-1M Tokamak and Progress of HL-2A Project

Recent experimental results of HL-1M tokamak and progress of HL-2A project are presented. Strong fishbone instability was observed during off-axis ECRH. This is first observation of the fishbone instability purely driven by energetic electrons produced by ECRH. The MBI was first proposed and demonstrated on HL-1M. Recently new results of MBI experiment were obtained by increasing the pressure of gas. A stair-shape density increment was obtained with high-pressure multi-pulse MBI just like the density evolution behavior during the multipellet injection. It is shown     

Banach空间上有界可逆线性变换逆变换的结构

Fillmore在[1]中得到一个定理:设A,T是Banach空间X上的线性变换,A有界,若Lat(A) Lat(T)且AT=TA,则T是A的多项式.在本文里,以此作为引理,讨论了Banach空间上可逆线性变换A在什么情况下,A-1可表示为A的多项式.本文最主要的结论是定理3.4:设X是Banach空间,A是X上的有界线性变换,且可逆,则A-1是A的多项式当且仅当A-1是A的局部多项式.     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.